• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.2
• /
• pp.146-158
• /
• 2010

In order to evaluate the characteristics of sediments and pollution by organic matter and metallic elements in intertidal sediments along the southwestern coast of Korea, we measured various geochemical parameters, including the mean grain size (Mz), water content (WC), ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and metallic elements (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, As), in intertidal surface sediments. The Mz of the surface sediments ranged from 2.1 to 8.3$\phi$, indicating that the surface sediments consist of various sedimentary facies, such as sand, slightly gravelly mud, sandy mud, and silt. The IL and COD in surface sediment ranged from 0.8 to 5.5% (mean $2.9\pm1.2%$) and from 3.9 to $13.8\;mgO_2/g{\cdot}dry$ (mean $8.5\pm2.6\;mgO_2/g{\cdot}dry$), respectively, which were lower than the values for surface sediment in areas near fish and shellfish farms or industrial complexes. No AVS was detected at any sampling station, despite various sedimentary facies. Most of metallic elements in surface sediments showed relatively good positive correlations with Mz and IL, which imply that the concentrations of metallic elements are mainly controlled by grain size and the organic matter content. The concentrations of metallic elements, except As, at some stations were considerably lower than those in the Sediment Quality Guideline (Effect Range Low, ERL) proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Similarly, the geoaccumulation index (Igeo) class indicated that pollution by metallic elements in intertidal surface sediment, except As, was moderate or non-existent. Our results imply that the intertidal surface sediments along the southwestern coast of Korea are not polluted by organic matter and metallic elements and are healthy for benthic organisms.

• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.51-65
• /
• 2006

Surface sediments for sedimentary analyses were sampled at 199 stations in the study area in August 2003. The surface sediments consisted of six sedimentary facies. Generally, sandy mud sediments dominated in the southern tidal flat of Ganghwa Island and sand sediments dominated in channel and subtidal zones of the western part of Ganghwa Island. The area of sandy mud sediment extended to eastward tidal flat compared to sedimentary facies in August 1997. In 30 surface sediment samples from the Ganghwa tidal flat and subtidal zone, 61 species were recorded in total assemblages, including 34 species of living population. Ammonia beccarii and Elphidium etigoense in living population and Ammonia beccarii, Elphidium etigoense, Jadammina sp. and Textularia earlandi in total assemblage were widely distributed. Generally, relatively large numbers of species and high values of species diversity occurred in the area of western part of tidal flat. Cluster analysis of total assemblages discriminates four biofacies. Biofacies 1 indicated eastern part of the tidal flat and biofacies 4 indicated western part of the tidal flat. Biofacies 3 were transitional zone between biofacies 1 and 4.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.328-340
• /
• 2006

In Janghwa-ri of Kanghwa Island morphological changes in four transects, 112 surface, and 2 core sediments were analyzed to understand the seasonal variation of the muddy tidal-flat environment. Sedimentary of facies can be classified into four facies; sand, muddy sand, sandy mud, and silt. During winter, the coarse-grained sediment facies expanded seaward. In the subsurface part of the core sediments, poorly sorted silty sediments dominate the area. According to the Pb-210 isotope analysis, accumulation rates of the tidal flat in Jangwha-ri appear to be $5{\sim}19mm/yr$. In the study area, the result is suggestive of a rapid change in depositional environments in recent years.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.903-919
• /
• 2018

This paper focuses on the depositional processes and environmental changes during initial marine flooding recorded in the lower Cambrian succession of the North China Platform in Shandong Province, China. In order to understand imbalance of accommodation and sediment supply in the initial stage of basin-fill, a detailed analysis of sedimentary facies was made for the lowermost siliciclastic deposits of the Liguan Formation. It reveals ten siliciclastic lithofacies in three large-scale outcrops (Jinhe, Anqianzhuang, and Zhangjiapo sections). These facies are grouped into four facies associations, representing siliciclastic foreshoreshoreface (S1), siliciclastic offshore (S2), distributary mouth bars (S3), and coastal plain (S4). The siliciclastic components occur in a linear belt, emanating from a major drainage system in the northeastern part of the platform. Deposition of siliciclastic sediments was largely controlled by regional topography of the unconformable surface and shoreline configuration as well as strong effect of waves and currents. With ensued rise in sea level and decrease in siliciclastic sediment supply, carbonate sediments prevailed, filling the accommodation created by epeirogenic subsidence and sediment loading.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1203-1211
• /
• 2010

In order to study geology and sediment characteristics in Danghang Bay area, surface geological survey, SBP (sub-bottom profiler) survey, and sediment analysis were conducted. Danghang Bay area has a closing coast surrounded by land, and surface layer are covered by mud and sandy mud. Sedimentary facies of the surface layer consists of Mm and Mms facies. A SBP seismic survey shows that gas bearing sediments might be spread throughout the sediment layers, so that it seems to be hard to find acoustic basement and gas seeps are easily found throughout the survey lines. The gas trapped in the sediments may be related to the high organic contents of the sediment, and the thick mud layer may restrain the gas from releasing.

• 한국해양학회지
• /
• v.20 no.2
• /
• pp.10-21
• /
• 1985

The sound velocity (compressional wave) and attenuation coefficient in the marine surface sediments in the nearshore areas off the Pohang, Pusan, Yeosu and Kunsan were investigated in terms of the geotechnical properties of the marine surface sediments in the water depth range of 10-50 meters. The marine surface sediments in the study areas are variable, that is, sand to clay. Due to the various four different study area, the sound velocities and attenuation coefficients in the surface sediment facies vary 1,44m/sec to 1,510m/sec in velocity and 0.82dB/m to 3.70dB/m in coefficient respectively. In fact, the sound velocity increases with increasing of density and mean grain sizes of the sediments, and however, with decreasing of porosith. The correlation equations between the sound velocith and geotechnical properties of mean grain size, density, and porosity were expressed as the following: Vp=1512.28406-9.16083(Mz)＋0.20795(Mz)$\^$2/, Vp=1876.15527-597.50397(d)＋210.48375(d)$\^$2/, Vp=1559.47217-2.09266(n)$\^$2/. where Vp is sound velocity, Mz is mean grain size, d is density, and m is porosity, respectively. However, the relationship between the attenuation and geotechnical properties were different from that of sound velocity and geotchnical properties. Furthermore, the correlation equations between attenuation coefficient and geotechnical properties were expressed as the following: a=1.85217＋0.67197(Mz)-0.09035 (Mz)$\^$2/, a=48.87859＋58.21721(d)-16.3.143(d)$\^$2/, a=2.06765＋0.07215(n)-0.00111(n)$\^$2/, where a is attenuation coefficient. The high attenuation appeared in the silty sand through fine sand facies in sediment and k values in these facies were in the range of 0.86 to 0.89 dB/m/KHz.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.39-51
• /
• 1989

A total of 139 surface sediment samples, collected from the continental shelf and slope off the southeastern coast of Korea, were analyzed in order to understand their grain-size, mineral composition and organic carbon content. Based on the grain-size characteristics, five surface sedimentary facies were distinguished: sand, clay, mud, sand-mud mixed, and sand-clay mixed facies. The sand facies appears to be composed mostly of relict sand. For mud, most of which seem to be of recent origin, two different sources were suggested, based principally on their areal distribution pattern and the local hydrographic conditions. Heavy mineral composition of the fine-sand size fraction allowed us to distinguish different sand populations from the study area. On the whole, the Hupo Bank sediments showed a high content of garnet, while the sediments from the northern part of the continental shelf were characterized by a relatively high content of metamorphic minerals (kyanite, sillimanite, andalusite, staurolite). Among clay minerals, the most abundant was illite, with chlorite, kaolinite and smectite following in decreasing order. Organic carbon contents in the sediments of the study area were generally high and showed an average value of 1.94%. The sediment grain-size exerted a strong influence on the organic carbon content. The highest organic carbon content, on the other hand, was found in the continental slope sediments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.268-278
• /
• 2001

To investigate sedimentary facies and environmental changes of the Nakdong River Estuary and its adjacent coastal area, the grain size analysis and measurement of organic matter, calcium carbonate, clay mineral and metallic elements were carried out for forty surface sediment samples. Based on regional distribution pattern and characteristics of the surface sediments, sedimentary facies in the study area can be divided into sand facies (TYPE I), mud facies (TYPE II) and sand-mud mixed facies (TYPE III). TYPE III is the transition of TYPE I and TYPE II in every aspects of sediment characteristics. It suggests that TYPE III may have been formed by the mixture of two different source of sediment : one derived from Nakdong River and the other resuspended fine-grained sediments from the Jinhae Bay by winnowing action during floods or storms. Among many aspects of environmental change after the construction of the Nakdong Barrage, the most significant is the increase of sand content off the sand barrier region. It could be explained by several reasons including decreased input of fine-grained sediment from river, increased hydrodynamic energy level off the sand barrier region and artificial effects such as dredging and dumping.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.759-771
• /
• 2011

We evaluated the pollution levels of organic matter and metallic element (Fe, Cu, Pb, Zn, Cd, Ni, Cr, Mn, As, and Hg) in the intertidal surface sediments of Aphae Island using several sediment quality guidelines (SQGs) and assessment techniques for sediment pollution. Based on the textural composition of sediment, the surface sediments were classified into two main sedimentary facies: slightly gravelly mud and silt. The concentrations of chemical oxygen demand (COD) and acid volatile sulfide (AVS) in the sediments ranged from 4.6-9.9 (mean $7.4{\pm}1.1$) $mgO_2/g{\cdot}dry$ and from ND-0.53 (mean $0.04{\pm}0.10$) mgS/$g{\cdot}dry$, respectively. These values were considerably lower than those reported from a farming area in a semi-enclosed bay of Korea and for SQGs in Japan. The metallic element concentrations in the sediments varied widely with the mean grain size and organic matter content, implying that the concentrations of metallic elements are influenced mainly by secondary factors, such as bioturbation, the resuspension of sediment, and anthropogenic input. The overall results for the comparison with SQGs, enrichment factor (EF), and geoaccumulation index ($I_{geo}$) indicate that the surface sediments are slightly polluted by Cr and Ni, and moderately polluted by As. Our results suggest that the intertidal surface sediments of Aphae Island are not polluted by organic matter or metallic elements and the benthic conditions are suitable for healthy organisms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.772-784
• /
• 2011

We measured grain size, organic matter, and metallic elements (Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) in intertidal sediments collected from six islands in the western part of Jellanam Province in order to evaluate heavy metal contamination in the tidal flat sediments of coastal islands. The evaluation of metal contamination was carried out using geochemical assessment techniques such as sediment quality guidelines (SQGs), enrichment factor (EF), and geoaccumulation index ($I_{geo}$). Surface sediments were classified into four sedimentary facies: sand, gravelly muddy sand, slightly gravelly mud, and silt. The concentrations of heavy metals in intertidal sediments from Jaeun, Amtae, Biguem, and Docho islands showed good positive correlations with mean grain size and ignition loss, indicating that the concentrations of metallic elements in these sediments were dependent on grain size and the organic matter content. The concentrations of heavy metals in sediments from almost all of the stations were lower than two criterion values proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Based on the EF and $I_{geo}$ results, surface sediments were a little polluted for Cr and were moderately polluted for As. Our results suggest that more intensive studies are necessary in the future in order to determine the major source of As in intertidal sediment and to evaluate the As pollution level in macrobenthos.