• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.484-488
• /
• 2010

적외선 열화상 카메라를 이용하여 온도를 측정할 때는 측정 대상물질의 적외선 방사율이 중요하다. 적외선 방사율은 흑체와 물체의 적외선 방사 강도비로 구할 수 있으나, 상온에서는 배경의 영향으로 인해 측정하는 것은 용이하지 않다. 따라서 FT-IR를 이용하여 반사법에 의해 강판 및 강판에 코팅된 도료의 적외선 반사율을 측정하고 적외선 방사용을 구하였다. 연마된 강판은 0.06 ~ 0.10의 적외선 방사율을 나타내고 있으며, 비연마 강판은 표면조도에 의해 광학적 특성의 변화로 인한 적외선 방사율 측정에 오차가 발생하였다. 강판에 코팅된 투명도료는 적외선 흡수로 인해 방사율은 0.50 ~ 0.84 정도로 높아졌으며, 도료의 적외선 흡수 밴드에 의해 파장에 따라 방사율도 변한다. 이 실험을 통해 재료표변의 재질, 두께, 조도 등 표면 상태에 따라 적외선의 광학적 특성이 변하는 것을 확인할 수 있었다. 또한 반사법은 금속 및 금속에 코팅된 도료의 적외선 방사율 측정에 유용한 것으로 판단되며, 측정된 적외선 방사율을 적외선 열화상에 제공함으로서 측정온도의 오차를 줄일 수 있다.

• 한국지리정보학회지
• /
• 제2권2호
• /
• pp.59-68
• /
• 1999

원격탐사기법에 의한 연안해역과 광범위한 수표면적을 지닌 호수의 부유사 분포를 파악하고자 하는 연구는 70년대 이후 위성자료의 이용이 활발히 이루어지면서 많은 연구결과들이 발표되었다. 하지만, 국내에서 원격탐사기법에 의한 부유사의 공간적인 분포를 정량적으로 해석하기 위한 연구는 부족한 실정이며, 적합한 알고리듬이 제시되지 못하고 있다. 본 연구에서는 시화호와 경기만 연안해역에서 실측한 부유사 자료와 SeaWiFS 밴드역을 가진 수중 광학장비에 의해 얻어진 반사치를 이용하여 부유사 알고리듬을 구성하였다. 또한, 알고리듬을 현장실측치가 있는 시점의 Landsat TM 자료를 적용하여 알고리듬의 적용에 따른 문제점을 제시하였다. 밴드비율과 밴드차에 의한 알고리듬 구성은 현장실측치와 $R^2$=0.7649의 관계를 나타내었고, 본 연구에서 얻어진 알고리듬을 통해 계산된 부유사와 실측치는 $R^2$=0.6959를 나타내었다. 하지만, Landsat TM으로부터 추출된 영상신호(radiance)를 알고리듬에 적용하여 얻은 결과는 만족하기 어려운 결과가 나타났고, 이는 엽록소와 용존유기물의 농도가 높은 수역에서는 부유사의 흡광과 산란에 의한 부유사 농도의 정량적인 평가가 어렵다는 것으로 해석되었다.

• Journal of Ecology and Environment
• /
• 제34권2호
• /
• pp.149-156
• /
• 2011

Phenological variables derived from remote sensing are useful in determining the seasonal cycles of ecosystems in a changing climate. Satellite remote sensing imagery is useful for the spatial continuous monitoring of vegetation phenology across broad regions; however, its applications are substantially constrained by atmospheric disturbances such as clouds, dusts, and aerosols. By way of contrast, a tower-based ground remote sensing approach at the canopy level can provide continuous information on canopy phenology at finer spatial and temporal scales, regardless of atmospheric conditions. In this study, a tower-based ground remote sensing system, called the "Phenological Eyes Network (PEN)", which was installed at the Gwangneung Deciduous KoFlux (GDK) flux tower site in Korea was introduced, and daily phenological progressions at the canopy level were assessed using ratios of red, green, and blue (RGB) spectral reflectances obtained by the PEN system. The PEN system at the GDK site consists of an automatic-capturing digital fisheye camera and a hemi-spherical spectroradiometer, and monitors stand canopy phenology on an hourly basis. RGB data analyses conducted between late March and early December in 2009 revealed that the 2G_RB (i.e., 2G - R - B) index was lower than the G/R (i.e., G divided by R) index during the off-growing season, owing to the effects of surface reflectance, including soil and snow effects. The results of comparisons between the daily PEN-obtained RGB ratios and daily moderate-resolution imaging spectroradiometer (MODIS)-driven vegetation indices demonstrate that ground remote sensing data, including the PEN data, can help to improve cloud-contaminated satellite remote sensing imagery.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.47-53
• /
• 2016

Silicon nitride ($SiN_x:H$) films made by plasma enhanced chemical vapor deposition (PECVD) are generally used as antireflection layers and passivation layers on solar cells. In this study, we investigated the properties of silicon nitride ($SiN_x:H$) films made by PECVD. The passivation properties of $SiN_x:H$ are focused on by making the antireflection properties identical. To make equivalent optical properties of silicon nitride films, the refractive index and thickness of the films are fixed at 2.0 and 90 nm, respectively. This limit makes it easier to evaluate silicon nitride film as a passivation layer in realistic application situations. Next, the effects of the mixture ratio of the process gases with silane ($SiH_4$) and ammonia ($NH_3$) on the passivation qualities of silicon nitride film are evaluated. The absorption coefficient of each film was evaluated by spectrometric ellipsometry, the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained using a UV-visible spectrophotometer. The interface properties were determined by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD). In hydrogen passivation, gas ratios of 1:1 and 1:3 show the best surface passivation property among the samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.324-327
• /
• 2005

An electrophoretic display using $TiO_2$ particles is the most promising candidate because it offers various advantages such as ink-on-paper appearance, good contrast ratio, wide viewing angle, image stability in the off-state and extremely low power consumption. The core technology of electrophoretic display is the dispersion controlling of $TiO_2$ nano particles in nonaqueous solution. To prepare an ink for electronic paper using electrophoretic properties of $TiO_2$ nano particles, cyclohexane with low dielectric constant and transparency, polyethylene for producing polymer coating layer which reduces apparent gravity of $TiO_2$, and $TiO_2$ powders were mixed together by planetary-mill. The zeta-potential value of $TiO_2$ particles in cyclohexane was measured about -40mV, but was measured over -110mV by dispersant attached to polyethylene-coated $TiO_2$ surface. Prepared electronic ink was filled in cross patterned micro-wall with $200{\mu}m$ in width and $40{\mu}m$ in height on ITO glass designed by photolithography. The response time of electronic paper evaluated by mobility of $TiO_2$ particle between micro-walls was measured 0.067sec, but the drift velocity from reflectance wave form during reverse from of electronic ink was measured 0.07cm/sec.

• 한국수자원학회논문집
• /
• 제52권11호
• /
• pp.941-946
• /
• 2019

산불은 면적과 산불 강도에 따라 지역 수문환경을 중대하게 변화시킬 수 있는 중대한 요소이며, 따라서 측정자료와 모형모의를 통한 산불의 영향과 피드백을 이해하는 것은 중요하다. 본 연구에서는 2019년 4월 4-5일에 대한민국 강원도에서 발생한 산불을 원격탐사자료(8-일 500-m MODIS 지표면 반사율 자료)를 사용하여 계산한 정규탄화지수의 차이(dNBR)를 이용하여 탐지하였다. 그 결과, 산불피해 총면적은 5개의 표준유역에 걸쳐 $29.50km^2$에 달하였고, 유역 면적의 1.00-6.19%를 차지하는 것으로 나타났다. 또한, 원격탐사자료(8-일 500-m MODIS 증발산량 추산자료)를 사용하여 분석한 결과, 산불 이전(2004-2018년)과 비교하여 2019년의 연간 증발산량이 해당 5개 유역에서 0.05-1.56% 감소할 것이라고 추산하였다. 본 연구는 산불의 지역 수문 순환에 미치는 영향을 이해하는 데 중요하다.

• 한국진공학회지
• /
• 제11권3호
• /
• pp.176-182
• /
• 2002

이온빔 스퍼터링을 사용하여 유리 기판위에 $TiO_2$ 박막을 증착하고 광학적, 구조적 특성을 분석한 후 실제 반사 방지막을 제작하였다. 박막 증착은 상온에서 실시하였으며 이온빔 전압을 1.2 kV 이온빔 전류 밀도를 200 $\mu\textrm{A}/\textrm{cm}^2$로 고정하였다. 방전가스로 아르곤과 산소 가스를 사용하였으며 $O_2$/Ar비를 변화시켜 박막을 증착하고 각 박막의 특성을 분석하였다. 증착된 박막은 비정질이었고 $O_2$/Ar비가 1일 때 화학량론적인 조성비를 나타내었다. 증착된 박막의 표면 거칠기는 7 $\AA$이내의 낮은 값을 보였으나 과량의 산소분위기에서는 그 값이 50 $\AA$이상으로 증가하였고 이로 인해 투과도가 감소하는 경향을 보였다. 증착된 $TiO_2$ 박막의 굴절률은 2.40-2.45값을 나타내었고.$O_2$/Ar 비가 0.25-1사이에서 높은 투과도를 나타내었다. 이온빔 스퍼터링으로 $SiO_2$/$TiO_2$6층 반사 방지막을 제작하여 가시 광선 영역에서 약 1%이하의 반사율 특성을 갖는 박막을 증착할 수 있었다.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.672-679
• /
• 2013

$Fe_4[Fe(CN)_6]_3$ coated on a mica or $TiO_2$/mica surface as infrared reflective blue pigment was prepared by a hydrothermal method. $Fe_4[Fe(CN)_6]_3$, used as coloring agent, was uniformly coated on mica or $TiO_2$/mica under the optimized condition of a 1.2 : 1 weight ratio between iron(III) chloride hexahydrate and potassium ferrocyanidetrihydrate at the initial pH level of 4.5 at $70^{\circ}C$. The infrared (IR)-reflective pigments were characterized by SEM, Zeta-potenial, FT-IR, and UV-VIS NIR spectrophotometry. Especially the CIE color coordinate and total solar reflectance(TSR) properties of the pigments were investigated in relation to variation of the coating and coated substrate thicknesses. Isolation-heat paint was prepared with 20 wt% blue pigments fully dispersed in acryl-urethane resin and several additives to coat the film uniformly. The films were also measured with CIE color coordinate, TSR, and the surface temperature was recorded by an isolation-heat measuring system. The pigments and films of $Fe_4[Fe(CN)_6]_3$ coated on mica and $TiO_2$/mica showed high TSR values compared with the TSR value of $Fe_4[Fe(CN)_6]_3$ itself. According to the increase of TSR value, the property of isolation-heat is effective. To realize the optimal blue color, we applied the the pigment to $TiO_2$ coated mica(TM(b)) which has blueish interference color. The pigment of $Fe_4[Fe(CN)_6]_3$ coated on TM(b) shows a strong blue color compared with that of $Fe_4[Fe(CN)_6]_3$ coated on $TiO_2$/Mmca(TM(w)), which has a whitish interference color.

• 한국태양에너지학회 논문집
• /
• 제35권2호
• /
• pp.73-83
• /
• 2015

When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.