• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.405-413
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside a rotating two-pass rectangular duct. A naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The objective of this study is to determine the effects of turning geometry with rotation for 0.0$\leq$Ro$\leq$0.24. The results reveal that the sharp-turn corner has the larger pressure drop and lower heat transfer in the post-turn region than those of the round-turn corner. The strong secondary flow enhances heat transfer for the round-turn corner. Coriolis force induced by the rotation pushes the high momentum core flow toward the trailing wall in the first passage with radially outward flow and toward the leading wall in the second passage with radially inward flow. Consequently, the high heat transfer rates are generated on the trailing surface and the leading surface in the first and second passage, respectively. However, the strong secondary flow due to the turning dominates the flow pattern in the second passage, thus the heat transfer differences between the leading and trailing surfaces are small with the rotation.

• 대한수학회보
• /
• 제51권6호
• /
• pp.1863-1874
• /
• 2014

In this paper, we study spacelike rotational surfaces which are called boost invariant surfaces in Minkowski 4-space $\mathbb{E}^4_1$. We give necessary and sufficient condition for flat spacelike rotational surface to have pointwise 1-type Gauss map. Also, we obtain a characterization for boost invariant marginally trapped surface with pointwise 1-type Gauss map.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.323-329
• /
• 2019

Sapphire is currently used as a substrate material for blue light-emitting diodes (LEDs). The market for sapphire substrates has expanded rapidly as the use of LEDs has extended into various industries. However, sapphire is classified as one of the most difficult materials to machine due to its hardness and brittleness. Recently, a lap-grinding process has been developed to combine the lapping and diamond mechanical polishing (DMP) steps in a single process. This paper studies, the effect of wafer surface roughness on the chemical mechanical polishing (CMP) process by pressure and abrasive concentration in the lap-grinding process of a sapphire wafer. In this experiment, the surface roughness of a sapphire wafer is measured after lap-grinding by varying the pressure and abrasive concentration of the slurry. CMP is carried out under pressure conditions of 4.27 psi, a plate rotation speed of 103 rpm, head rotation speed of 97 rpm, and slurry flow rate of 170 ml/min. The abrasive concentration of the CMP slurry was 20wt, implying that the higher the surface roughness after lapgrinding, the higher the material removal rate (MRR) in the CMP. This is likely due to the real contact area and actual contact pressure between the rough wafer and polishing pad during the CMP. In addition, wafers with low surface roughness after lap-grinding show lower surface roughness values in CMP processes than wafers with high surface roughness values; therefore, further research is needed to obtain sufficient surface roughness before performing CMP processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.28-31
• /
• 2002

This paper compared the surface roughness with variables before development of centerless grinding using far ferrule machining. In this paper, theoretical surface roughness is obtained from variables such as mesh number, rate of concentration of grinding wheel, wheel rotation of work-piece etc., and optimum condition of machining is selected. For satisfaction the technical side and economical side, centerless grinding using fur ferrule machining should be designed more than #600, 18.8% rate of concentration of grinding wheel, 1440rpm wheel rotation outwork-piece.

• 대한수학회보
• /
• 제39권1호
• /
• pp.175-184
• /
• 2002

A Cellular embedding of a graph G into an orientable surface S can be considered as a cellular decomposition of S into 0-cells, 1-cells and 2-cells and vise versa, in which 0-cells and 1-cells form a graph G and this decomposition of S is called a map in S with underlying graph G. For a map M with underlying graph G, we define a natural rotation on the line graph of the graph G and we introduce the line map for M. we find that genus of the supporting surface of the line map for a map and we give a characterization for the line map to be embedded in the sphere. Moreover we show that the line map for any life of a map M is map-isomorphic to a lift of the line map for M.

• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.341-350
• /
• 2008

In friction stir welding for 6061-T6 with various traveling speed and rotation speed conditions, the best mechanical characteristics presented in traveling speed of 507 mm/min and rotation speed of 1100RPM. The maximum tensile strength and yield strength increased with the increasing of traveling speed. The result of the electrochemical characteristic evaluation in friction stir welding at optimum conditions for 6061-T6 Al alloy presented a good characteristics compare to base metal.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.9-13
• /
• 2017

This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

• PNF and Movement
• /
• 제18권2호
• /
• pp.255-263
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of proprioceptive neuromuscular facilitation (PNF) lower extremity pattern on the dominant leg on muscle activity of the lower extremity supported by the ground. Methods: The subjects were 20 healthy males living in Busan. All subjects performed four direction PNF lower extremity patterns, and data were collected by surface electromyography from the gluteus medius (GM), tensor fascia latae (TFL), vastus medialis oblique (VMO), vastus lateralis oblique (VLO), and semitendinosus (STD) muscles of the opposite lower extremity during PNF lower extremity pattern. The PNF lower extremity pattern applied to the dominant leg was (1) flexion/adduction/external rotation with knee flexion; (2) extension/abduction/internal rotation with knee extension; (3) flexion/abduction/internal rotation with knee flexion; and (4) extension/adduction/external rotation with knee extension pattern, repeated 3 times per pattern and using the average value of the collected results. Collected muscle activity values were analyzed by one-way ANOVA, and post-hoc Tukey testing was performed to check between-group differences. The statistical significance level was set at α = 0.05. Results: GM and TFL flexion/abduction/internal rotation pattern with knee flexion was significantly higher than other patterns. VMO and VLO extension/adduction/external rotation pattern with knee extension was significantly higher than other patterns. STD flexion/adduction/external rotation pattern with knee flexion was significantly higher than other patterns. Conclusion: The study confirms differences in lower extremity muscle activity for the PNF lower extremity pattern, indicating that selective muscle contraction induction is possible using a pattern appropriate to the purpose of treatment.

• 천문학회보
• /
• 제35권1호
• /
• pp.66.1-66.1
• /
• 2010

Using two-dimensional numerical hydrodynamic simulations, we investigate the star formation rate (SFR) in turbulent, multiphase, galactic gaseous disks. Our simulation domain is axisymmetric, and local in the radial direction and global in the vertical direction. Our models include galactic rotation, vertical density stratification, self-gravity, radiative heating and cooling, and thermal conduction, but do not include spiral-arm features. Turbulence in our models is driven by momentum feedback from supernova explosion events occurring in localized dense regions formed by thermal and gravitational instabilities. Self-consistent radiative heating, representing enhanced/reduced FUV photons from the star formation, is also taken into account. By controlling three parameters (the gas surface density, the stellar disk density, and the angular rotation rate) that characterize local galactic disks, we explore how the SFR depends on the background environmental state. We also discuss the relation between the SFR and the gas surface density found in our numerical models in comparison with observations.