• 한국치위생학회지
• /
• 제15권2호
• /
• pp.189-196
• /
• 2015

Objectives: The purpose of the study is to investigate the relationship between saliva factors and oral hygiene factors in adults. Methods: The subjects were 112 adults from April 1 to June 15, 2014. The selected salivary factors included stimulated/unstimulated salivary flow rates, salivary buffering capacity and pH, and the selected oral hygiene factors included halitosis, wet weight of tongue plaque and oral humidity in dorsum and inferior surface of tongue. Results: There were significant differences in stimulated/unstimulated salivary flow rates, oral malodor and wet weight of tongue plaque. There were significant differences according to age in stimulated/unstimulated salivary flow rates, salivary buffering capacity and wet weight of tongue plaque. Age had a negative correlation with salivary buffering capacity and had a positive correlation with wet weight of tongue plaque. Unstimulated salivary flow rate had a positive correlation with stimulated salivary flow rate, and stimulated salivary flow rate was positively correlated with oral humidity of inferior surface of tongue, salivary buffering capacity and halitosis. Oral humidity of inferior surface of tongue had a positive correlation with salivary buffering rate, pH and halitosis. Salivary buffering capacity was positively correlated with pH, and pH was negatively correlated with halitosis. Conclusions: The salivary factors were linked to the oral hygiene. As there may be great changes in salivary flow rate and oral hygiene due to various factors, the salivary factors seem to be one of the major factors to ensure oral hygiene and to promote oral health.

• 대한치과의료관리학회지
• /
• 제7권1호
• /
• pp.50-55
• /
• 2019

The purpose of this study was to compare the number of bacteria before and after the use of surface disinfectants, demonstrate the bactericidal effect of surface disinfectants, and emphasize on the importance of surface disinfectants by recognizing the importance of infection control in dentistry. Chlorhexidine, hydrogen peroxide, ethanol, and chemical disinfectants are commonly used in dentistry. NaOCl was selected as the experimental group, and the bacterium test results obtained by comparing the table without surface sterilization as a control group showed that all disinfectants had an effective bactericidal effect (p<0.05). In the growth inhibition test comparing the experimental and control groups, all results were 100%, proving the effectiveness of surface disinfectants. The results showed that all surface disinfectants preferred and used by medical institutions were effective. Therefore, all surface disinfectants used in the experimental group were effective for surface disinfection for infection control. Dental clinicians should be aware of the necessity of disinfection of surfaces, such as table, chairs, and unit chairs, and make an active effort to ensure that both clinicians and patients are safe from infection.

• 치위생과학회지
• /
• 제19권4호
• /
• pp.261-270
• /
• 2019

Background: In this study, four types of effervescent vitamins marketed in Korea were analyzed for their acidity and vitamin content. For this purpose, bovine teeth were immersed in vitamin, and surface microhardness and appearance were measured before and after immersion to evaluate tooth demineralization and erosion. Methods: Bovine permanent incisors with sound surface enamel were cut to 5×5 mm size, embedded in acrylic resin, and polished using a polishing machine with Sic-paper. The prepared samples were analyzed for pH, vitamin content, and surface hardness before and after immersion using a surface microhardness meter. Demineralization of surface dental enamel was observed using a scanning electron microscope. Results: The average pH of the four effervescent vitamins was less than 5.5; the pH of the positive control Oronamin C was the lowest at 2.76, while that of the negative control Samdasoo was the highest at 6.86. The vitamin content was highest in Berocca and lowest in the DM company Multivitamin. On surface microhardness analysis, surface hardness values of all enamel samples were found to be decreased significantly after 1 and 10 minutes of immersion (p<0.05). After 10 minutes of immersion, there was a significant difference in the decrease in hardness between the experimental groups (p<0.05). Scanning electron microscopy observation showed that dental enamel demineralization after 10 minutes of immersion was the most severe in Oronamin C except for Samdasoo, followed by DM company Multivitamin and VitaHEIM. Immersion in BeroNew and Berocca resulted in similar effects. Conclusion: There is a risk of tooth erosion due to decreased tooth surface microhardness when using the four types of effervescent vitamins and vitamin carbonated beverages with pH below 5.5. Therefore, high pH vitamin supplements are recommended to prevent tooth erosion.

• 한국치위생학회지
• /
• 제19권2호
• /
• pp.307-315
• /
• 2019

Objectives: The aim of this study was to investigate the characterization of composite resin inlay surface with silane and non-thermal atmospheric pressure plasma treatment. Methods: Composite resin inlay was used as a specimen, which was treated by sandblasting + silane and sandblasting + plasma. The untreated specimens were assigned to the control group. Specimens were analyzed for surface roughness, color change, and chemical composition. Statistical analyses were performed using one-way ANOVA test (p<0.05). Results: The present findings showed that the roughness and color changes of the plasma-treated surface were significantly lower than those of the silane-treated surface. In addition, a change in the chemical composition was observed on the plasma-treated surface. Conclusions: Based on the results, non-thermal atmospheric pressure plasma could be a potential tool for the cementation of composite resin inlay.

• 한국치위생학회지
• /
• 제10권4호
• /
• pp.757-764
• /
• 2010

Objectives : The fluoride coating for caries prevention and strengthen enamel use NaF(sodium fluoride, Junsei Chemical Co., Ltd, Japan) 2% gel, SnF2(stannous fluoride, SIGMA-ALDRICH Gmbh, USA)8% gel and APF(acidulated phosphate fluoride, Sultan health care, USA) 1.23% gel. Methods : After put the enamel piece in these fluoride compound gel, we observed density level. And after measuring the vickers hardness, Got the following conclusions. Results : 1. After settling in the APF 1.23% during 6 days, we observed high density level of enamel surface using 250 magnification scanning microscope. The vacuum of surface packed (in) like sardines. 2. After settling in the APF 1.23% during 6 days, we observed reducing the space between the cluster of enamel surface using 50,000 magnification scanning microscope. 3. The vickers hardness change was very much on the all kinds of fluoride compound gel[2% NaF(sodium fluoride)gel, 8% SnF2(stannous fluoride) gel, 1.23% APF(acidulated phosphate fluoride)gel]. It's all because of reducing the space between the cluster of enamel surface(p<0.001). Conclusions : The vickers hardness change was very much on the all kinds of fluoride compound. It's all because of reducing the space between the cluster of enamel surface.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.29-36
• /
• 2008

In order to give pulp surfaces anti-bacterial functionality and photo-catalytic deodorant ability, functional pulps was made using a surface modification method with Ag nano-colloidal solution and $TiO_2$ filler. Hygiene paper was made with the specially modified pulp, and anti-bacterial and deodorant tests were carried out. The Ag nano-colloidal solution was coated on the surface of the pulp using the high pressurized gas phase squirt through the spray nozzle mounted on the hybridization system. The surface modified functional pulp was hybridized with the optimum ratio of $TiO_2$(fine particle) to pulp(core particle) under the condition of $6,000{\sim}10,000$ rpm for $3{\sim}7$ minutes in the system. The anti-bacterial functionality of the hygiene paper was confirmed by the halo test in which the formation of the clear zone around the hygiene paper sample was observed. The inhibition growth test using MIC bioscreen C showed the inhibition growth effect of the bacteria as the reaction time was increased. The photo-catalytic effect measurement of the $TiO_2$ for 4 hours of the reaction showed $50{\sim}60%$ of decomposition rate, reaching over 60% for 5 hours of the reaction.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.29-38
• /
• 2023

Background: The purpose of this study was to investigate the effect of salad dressings on the flowable composite resin surface and the erosion-inhibitory effect of calcium. Methods: The experiment included six groups: oriental dressing, balsamic dressing, lemon-garlic dressing, lemon-garlic dressing supplemented with 3% calcium, mineral water as a negative control group, and orange juice as a positive control group. pH and titratable acidity were measured. The prepared specimens were immersed in the experimental solutions for 1, 3, 5, 15, and 30 minutes. The surface microhardness was measured using the Vickers hardness number before and after the treatment, and the surface of the specimens was observed using a scanning electron microscope (SEM). Results: The pH values of the experimental groups in increasing order were as follows: lemon-garlic dressing (2.49±0.03), balsamic dressing (3.12±0.06), lemon-garlic dressing +3% calcium (3.27±0.09), oriental dressing (3.75±0.03), orange juice (3.82±0.02), and mineral water (7.32±0.16). The largest surface hardness reduction value was shown in lemon-garlic dressing (-9.61±1.16), followed by balsamic dressing (-9.17±1.63), oriental dressing (-8.62±1.09), orange juice (-8.19±1.36), lemon-garlic dressing +3% calcium (-6.76±1.23), and mineral water (-1.63±2.47). According to the SEM findings, the experimental and positive control groups showed rough surfaces and micropores, whereas the negative control group showed a smooth surface. Moreover, the lemon-garlic dressing with +3% calcium showed fewer micropores and a smoother surface than the lemon-garlic dressing. Conclusion: The intake of salad dressings at a low pH could weaken the surface microhardness of the flowable composite resin. However, adding calcium to these salad dressings can reduce the risk of microhardness reduction on the flowable composite resin surface.

• 치위생과학회지
• /
• 제22권1호
• /
• pp.20-29
• /
• 2022

Background: The purpose of this study is to investigate the effect of liquefied digestive medicines on the composite resin surface. Methods: Three types of liquefied digestive medicines (Gashwalmyeongsu, Wicheongsu, and Saengrokcheon) were selected as experimental groups, Samdasoo and Chamisul as negative controls, and Trevi as positive controls were selected to measure pH and titratable acidity. The samples filled with resin at acrylic were made total 300, 50 per group. To evaluate the erosion risk of the composite resin, the specimens were immersed in a liquefied medicine for 1, 3, 5, 15, and 30 minutes, and then the surface microhardness was measured using the Vickers Hardness Number, and the surface change was observed with scanning electron microscope (SEM). Results: The average pH of the three liquefied medicine was 3.75±0.30, the Saengrokcheon was the lowest at 3.45±0.01, and the Trevi was 4.66 and Samdasoo and Chamisul were 7.40 and 8.58, respectively. The amount of NaOH reaching pH 5.5 and 7.0 was the lowest in the order of Trevi, Gashwalmyeongsu, Wicheongsu, and Saengrokcheon. The largest surface hardness reduction value was shown in Gashwalmyeongsu (-11.85±3.73), followed by Saengrokcheon (-9.79±3.11) and Wicheongsu (-8.28±2.83), and Samdasoo (-0.84±1.56) and Chamisul (-6.24±0.42) had relatively low surface hardness reduction values. However, Trevi (-16.67±5.41), a positive control group containing carbonic acid, showed a higher decrease in surface hardness than the experimental group. As a result of observation with SEM, experimental group and positive control group, showed rough surfaces and irregular cracks, and negative control groups showed smooth patterns similar to before immersion. Conclusion: The liquefied digestive medicine with low pH could weaken the composite resin surface, and the carbonic acid component could more effect on the physical properties of the composite resin than pH.

• 한국치위생학회지
• /
• 제9권4호
• /
• pp.740-752
• /
• 2009

Objectives : This study was carried out to examine the effect of varnish fluoride and APF gel on the acid resistance and the remineralization of the enamel. Methods : At first, the microhardness changes of enamel surface were measured after demineralizing the fluoride treated tooth surface. Next, the changes were measured after fluoride application to the demineralized enamel surface. Results : 1. Acid resistance was higher in varnish fluoride groups than APF gel groups and the difference was significant(p<0.001). 1) Varnish fluoride groups Microhardness of enamel surface showed $297.76{\pm}9.89$ after fluoride treatment and $260.90{\pm}28.67$ after drmineralization. The changes of Vickers hardness number(VHN) were $-36.86{\pm}27.30$. 2) APF gel groups Microhardness of enamel surface showed $298.79{\pm}17.28$ after fluoride treatment and $43.75{\pm}18.58$ after demineralization The changes of VHN were $-255.04{\pm}21.31$. 2. No significant changes were surveyed in both varnish fluoride groups and APF gel groups as for remineralization of enamel(p>0.05). 1) Varnish fluoride groups Microhardness of enamel surface showed $46.58{\pm}15.42$ after demineralization and $46.61{\pm}15.70$ after fluoride treatment. The changes of VHN were $0.02{\pm}3.75$. 2) APF gel groups Microhardness of enamel surface showed $47.13{\pm}19.31$ after demineralization and $42.59{\pm}16.12$ after fluoride treatment. The changes of VHN were $-4.54{\pm}5.06$. Conclusions : Varnish fluoride showed higher acid resistance than APF gel, however both of them were observed to have no effect on the remineralization of the enamel.

• 한국치위생학회지
• /
• 제21권1호
• /
• pp.17-25
• /
• 2021

Objectives: Interdental toothbrushes are made and sold in various design types and brush thicknesses. However, there is little research on which type of interdental toothbrush currently manufactured and sold on the market is the most effective in eliminating interdental plaque. Therefore, this study aims at comparing the elimination rate of artificial dental plaque between reciprocating- and rotating-types of interdental toothbrush based on the frequency of application and thickness of brush. Methods: This study focused on the effective management of dental plaque using interdental toothbrush, a recommended item for personal dental hygiene. The method was as follows: artificial dental plaque coloring was applied to the distal surface of artificial tooth #46 and the mesial surface of #47. The area was subject to reciprocal movement three and six times to eliminate artificial plaque. Results: The results showed that using a 0.7mm rotating interdental toothbrush, on the proximal surface of each molar, the elimination rates were: on the distal surface of #46, upon three applications 40.24%, upon six applications 30.41%; on the mesial surface of #47, upon three applications 44.52%, upon six applications 29.72%. Conclusions: These results showed that for rotating-type interdental toothbrushes, a high dental plaque elimination rate was observed even though many reciprocal movements were not performed.