• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.88-95
• /
• 1997

Olfactometer was used to find the attractiveness of kairomone extracted from gypsy moth (Lymantria dispar) to the egg parasitoid (Ooencyrtus kuvanae). The attractiveness of kairomone extracted from scales and hairs which were attached to the surface of the eggs were higher than that of whole eggs with 79.9% and 67.6% respectively. The probing lantency of the egg parasitoid on the extract of scales and hairs were 115.5 sec. and that of whole eggs were 113.2 sec. Eggs taken from egg mass were shown 91.0% of attractiveness to the egg parasitoid, however only 15% of egg parasitoid were attracted by follicles dissected from the host ovary. The probing latency of egg mass was faster than that of follicles dissected from the host with 84.2 sec. and 114.0 sec. respectively. Egg parasitoid showed the most active attractiveness (88.0%), relatively longer examing period (89.2 sec.) and shorter probing latency (26.8 sec.) to the adhesive materials secreted from reproductive accessory glands of the host. Out of six organic solvents used for the extraction of kairomone from the host egg mass, n-hexane fraction received the most active response from xthe egg parasitoid and the parasitoid reared in vivo showed 3 times higher attractiveness to the n-hexane fraction than that of in vitro.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.469-484
• /
• 1999

The purpose of this study was to evaluate new bone formation following guided bone regeneration by resorbable and nonresorbable membrane. Six adult mongrel dogs were used. The first, second, third, fourth premolars in the mandible of each dog were extracted. Two months after tooth extraction, a buccal dehiscence defect was surgically created on each edentulous area. The experimental sites were divided into three groups according to the treatment modalities ; Group I-a: surgical treatment only ; Group I -b: allogenic decalcified freezed dried bone grafting ; Group II-a : e- PTFE membrane placement only ; Group II-b : allogenic decalcified freezed dried bone grafting and e-PTFE membrane placement ; Group III-a : Vicryl(R) mesh placement only ; Group III-b : allogenic decalcified freezed dried bone grafting and Vicryl(R) mesh placement . The animals were sacrificed at 8 weeks after operation and the specimens were prepared for histologic and histometric examination. The results were as follows : Clinically, all defect sites were healed without exposure of barrier membrane after the eight weeks. In Group I-a, dense connective tissues were impinged in the bony defect area. Well vascularized and fibrous bone marrow indicated that bone formation was still taking place was found. In Group I-b, in areas closer to the periphery, lamellation of the newly formed bone would found. In Group II-a, beneath the e-PTFE membrane a dense layer of connective tissue covering the most external portions of the regenerated tissue was seen. The new bone surfaces were lined with osteoid and osteoblast. In Group II-b, a dense layer of connective tissue covering the most external portions of the regenerated tissue was observed beneath the e-PTFE membrane. A notable amount of alveolar ridge regeneration was seen with new rigdes with well-contoured form. In Group III-a, the new bone surface were lined with osteoid and osteoblast, indicating active bone formation. A clear demarcation could not be noted between the host bone and new bone. In Group III-b, a notable amount of alveolar ridge regeneration was seen with new ridges assuming wellcontoured form. In areas closer to the periphery, lamellation of the newly formed bone would found. As histometric examination, the amount of bone formation was gained from $12.8mm^2$ to $26.3mm^2$. It was significantly greater in group II-b and group III-b compared to other groups(p<0.05) . These results suggest that Vicryl(R) mesh after DFDB grafting used in guided bone regeneration could create and sustain sufficient space for new bone formation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.37-46
• /
• 2002

The main purpose of this research is to discuss the urban heat island which will be caused by urbanization, especially by the construction of new town on a wide green zone. Over the last ten years, five new towns have been developed around the Seoul metropolitan area. However these new towns become bedroom communities and create traffic problems between Seoul and its surrounding areas because of an increase in population and a lack of roads and other infrastructures. The construction of another such new town is under consideration in the Pan-gyo area. But it is important that Pan-gyo remains a wide green zone. Many studies show that green space can play an important role in improving urban eco-meteorological, ameliorative capability and air hygiene. The objective of this study is to analyze the urban heat islands of Bund-Dang Si which was constructed in 1996 and of the Pan-Gyo area planned as new town. To investigate the local thermal environment and its negative effects caused by change of the land use type and urbanization we used LANDSAT TM images for extraction of urban surface temperature according to change of land use over 15 years. These data were analyzed together with digital land use and topographic data. As a study result, we found that the thermal island of this area from 1985 to 1999 rapidly increased with a difference of mean temperature of more than 12'E. Before construction of Bun-Dang Si the temperature of this area was the same as the forest, but during the new town construction in 1991, an urban heat island developed. The temperature of forest with a size of over 50% of the investigation area was lowest, which leads us to conclude that the forest cools the urban and its surroundings. The mean temperature of the residential and commercial area is more than +4.5$^{\circ}C$ higher then forest, so this method of land use is the main factor increasing the urban heat island. Urban heat islands and green space play an important role in urban wind systems, i.e. Thermal Induced Air Exchange and Structural Wind Circulation, because of their special properties with regard to energy balance between constructed urban and land. The skill to allocate land use types in urban areas is a very important planning device to reduce air pollution and induce the fresh cold air from green space. An urban climatic experiment featuring a numerical wind simulation study to show the air corridor will be published in a following research paper.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.10 no.1
• /
• pp.103-106
• /
• 1981

A strain of Staphylococcus aureus resistant against cadmium was cultivated by using a liquid medium containing 10ppm cadmium ion, and then, it was fractionated into several fractions as described in the previous paper. Content of the metal in each fraction was determined through an atomic absorption spectrometery. The results are as follows; (1) A $690.9{\mu}g$ cadmium was contained in one gram dry cell. (2) A 39.9% of total cadmium was easily extracted by TCA, however a 52.2% was unextractable even by series of extraction with TCA, ethanol-ehter, perchloric acid and ammonium water. (3) Among the fractions prepared along the cellular structure, plasma membrane fraction showed a highest content of the metal by containing a 59.1%. (4) The fraction of cytoplasm and cell wall contained a 26.8 and 14.1%, respectively. (5) More than 90% of the metal contained in the cell wall was detected from the fraction of lipopolysaccharide. It is considered from these results tht at least a 70% of the cadmium up taken by the resistant cell associates with membranous structure in the cell surface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.526-531
• /
• 2010

Early childhood caries which mainly affect maxillary anterior area, defined as 'the presence of 1 or more decayed, missing, or filled tooth surfaces in any primary tooth in a child 71 months of age or younger'. Extraction of teeth when early childhood caries affected in maxillary primary incisors often develops progressively, result in severe destruction of crowns, acute or chronic pulpitis, and periapical abscess formation. Maxillary primary incisors are need to preserve as possible, because the early loss of maxillary primary incisors may lead to various functional, esthetical, and psychological problems. It is necessary to the availability of an easy to perform technique capable of providing efficient, durable, functional, and esthetic restorative methods. Polyethylene fiber-reinforced post can be used in strengthen of composite resins that is esthetic and good physical and mechanical properties. $Ribbond^{(R)}$ is made from an polyethylene fiber, has numerous usages, its surface is treated to enhance adhesion to resins, ease of manipulation, relatively cost effective. We report this case, had restored of maxillary primary incisors with severe coronal destruction due to affecting severe early childhood caries, using polyethylene fiber-reinforced posts, composite resin cores, and celluloid crowns. We could obtain good result of treatment.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.3
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Journal of Environmental Impact Assessment
• /
• v.17 no.2
• /
• pp.97-103
• /
• 2008

This study presented politic proposals and diverse utilization-type in coastal areas by analyzing results of reviewed related-statements of marine environment during the one year period of 2007 by Marine Environmental Impact Assessment Center. Total of 358 cases were reviewed, which was a significant increase from 270 in 2006. Consultation on the utilization of sea areas (CUSA) accounted for the largest number of 165 (46.1%) and it was followed by 104 cases of environmental impact assessment (EIA) (29.0%) and 89 cases of prior environmental review (PER) (24.9%). As such, evaluation statements (EIA+PER) related to consultations of the Ministry of Environment accounted for approximately 54% of the entire cases reviewed. To analyze the overall results of reviewing marine-related evaluation statements, utilization and planning were conducted by 47.9%, 38.4% and 13.7% in the South Sea, West Sea and East Sea of Korea, respectively. In evaluation statements (EIA+PER), port construction, industrial complex construction, urban management plan and road construction took up most of the part by 40.9%, 20.2%, 10.4% and 7.3%, respectively. In terms of CUSA-statement, it was evaluated that consultations were mostly carried out on use and reclamation of public water surface in coastal areas and on sea aggregate extraction process in EEZ. The largest number of plans for coastal use were established for Jeollanam-do, followed by Gyeongsangnam-do, Chungcheongnam-do, Gyeongsangbuk-do and Gyeonggi-do. In particular, development plans were concentrated on Jeollanam-do and Gyeongsangnam-do with stable marine environment and outstanding view of the nature. In most cases, these regions are adjacent to the areas designated as a sea area for environmental management and fisheries resources protection zone. Therefore, conflicts exist between development and preservation. Also, rather than random development, more detailed marine environmental impact assessment, gathering of public opinions and politic harmony are essentially required. For efficient coastal management and environmentally sound and sustainable development, fulfilling consistent and transparent coastal policies as well as active and reliable decision making to center on coastal environment by management bodies will be important.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.356-361
• /
• 2018

It is common to analyze volatile organic compound (VOC) or semi-VOC (SVOC) in a sample composed of a complex matrix consisting of multiple components such as bloods through a separation process. Adsorption is a physical phenomenon in which certain components accumulate on the surface of other phases. In order to overcome difficulties in the pretreatment process, an adsorption is frequently used. Solid phase microextraction (SPME) equipment with porous carbon carboxen (CAR) is an example of adsorption application. In this study, the adsorption of 4-octylphenol to carboxen was examined. To do so, the extraction efficiency for such solvents as dichloromethane ($CH_2Cl_2$, DCM), ethylacetate ($CH_3COOC_2H_5$, EA) and diethylether ($C_2H_5OC_2H_5$, $Et_2O$) was studied and also the derivatization reaction for 4-octylphenol with reagents of bistrimethylsilyltrifluoroacetamide (BSTFA), methylchloroformate (MCF) and pentafluorobenzylbromide (PFBBr) was compared. The combination of DCM and BSTFA showed good performance thus they were adopted for this study. Thermodynamic adsorption experiments showed that the adsorption process was endothermic and Freundlich isotherm equation was more suitable than Langmuir isotherm. It was also found that the adsorption followed a pseudo-$2^{nd}$ order kinetic model.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.33-39
• /
• 2020

The objective of this study was to evaluate the possibility for the coffee filter paper of Hanji. In this study, the samples for Hanji filter papers were prepared with three different mulberry fiber contents of 10, 30 and 50%(w/w). Surface brightness and apparent density of hand-made Hanji decreased with increasing mulberry fiber contents. However, values of thickness, tensile strength, wet tensile strength, burst strength, and folding endurance for hand-made Hanji increased by increasing the contents of mulberry fibers due to fiber-to-fiber bonding. The results of the coffee extraction test using the developed filter papers showed no significant differences between commercial filter paper and Hanji filter paper. Therefore, Hanji filter paper containing more than 30%(w/w) mulberry fiber may have potential uses for the dripped coffee filter application from a physical property point of view.