• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.39-46
• /
• 2006

The purpose of this study was to determine the effects of slump sitting postures on the masticatory, neck, shoulder, and trunk muscles associated with work-related musculoskeletal disorders (WRMD). Eleven healthy adults (age, $23.3{\pm}2.7$ yrs; height, $174.0{\pm}4.1$ cm; weight, $61.4{\pm}6.6$ kg) participated in this study. The participants were free of injury history and neurologic deficits in the masticatory, neck muscles and upper extremities at the time of participation. The subjects were asked to perform erect and slump sitting postures under the guidance of physical therapists. The surface electromyography (EMG) was recorded from the anterior temporalis, masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique, gluteus maximus muscles of 11 adults as they performed visual terminal display work, which are known as the weakened and tightened muscles owing to WRMD. The recorded signals were averaged and normalized to the mean amplitude of the EMG signal obtained during submaximal reference voluntary contractions. The results of study were as follows: The masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique muscles significantly differed in the slump sitting posture (p<.05). The muscle activities of the serratus anterior, middle trapezius muscle, and external abdominal oblique were significantly lower and that of the masseter, upper trapezius, L3 paraspinal muscles were significantly higher. Further research is needed to assess the motor control problems and the function of the deep muscles in posture stability of patients with WRMD.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.75-84
• /
• 2001

The reliable data relating to the condition of road surface is of increasing importance to deliver the road condition to driver and road management authority. This paper describes the development of a new high-speed. automatic, road data collection system, which collects the longitudinal road data with ${\sim}30cm$ interval covering full width of the road at 100km/h speed. The system calculates the international roughness index (IRI) from the collected data and displays the IRI and road profile data on the screen. To develope the system, we implement an optical range finder, advanced distance and motion detectors, and signal processing and display modules. The measurement accuracy of the system at 70km/h operation speed shows ${\pm}0.1m/km$ in the IRI for the standard road. To confirm the performance of the developed system, we also measure the IRI of a deployed highway road and compare the results with a conventional system and human eye measurement results.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.739-744
• /
• 2011

Activated carbon SCR(CSCR) catalyst that is used to remove $NO_x$ in exhaust gas including boron discharged from the production process of liquid crystal display(LCD) shows deactivation when boron is deposited to block the pores within the catalyst or to cover its active sites. The spent carbon catalyst is regenerated by washing with various surfactants, drying and calcination. For comparison of the physical and chemical properties before and after the regeneration with the variables, type of surfactants and calcination condition, element analysis by ICP, $N_{2}$ adsorption were conducted. $DeNO_{x}$ in SCR with $NH_3$ was carried out in a fixed bed reactor at $120^{\circ}C$. The activated carbon catalyst regenerated through washing with a non-ionic surfactant in $H_{2}O$ at $90^{\circ}C$ and calcination under $N_{2}$ gas at $550^{\circ}C$ shows similar level of surface area and $NO_x$ removal efficiency with those of fresh catalyst.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.781-783
• /
• 2009

We achieved high efficiency and long lifetime in small-molecule organic light-emitting diodes using a blend of polyaniline-based conducting polymer and a perfluorinated ionomer as a hole injection layer (HIL). The HIL formed by single spin coating greatly enhanced the surface work function and thus the hole injection from the anode, which resulted in great improvement in device luminous efficiency. We find that the solution processed HIL outperforms the conventional vacuum-deposited small molecule HIL in terms of the device performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.399-402
• /
• 1998

Electroluminescent(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. One of the problems of such device is a lifetime, where a degradation of the cell is possibly due to an organic layers thickness, morphology and interface with electrode. In this study, light-omitting organic electroluminescent devices were fabricated using Alq$_3$(8-hydroxyquinolinate aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl(1-1\`-biphenyl]-4,4'-diamine). Where Alq$_3$ is an electron-transport and emissive layer, TPD is a hole-transport layer. The cell structure is ITO/TPD/Alq$_3$/Al and the cell is fabricated by vacuum evaporation method. In a measurement of current-voltage characteristics, we obtained a turn-on voltage at about 9 V. We also investigated stability of the devices using buffer layer with blend of PEI (Poly ether imide) and TPD by varying mot ratios between ITO and Alq$_3$. In current-voltage characteristics measurement, we obtained the turn-on voltage at about 6 V and observed an anomalous behavior at 3∼4 V. And we used other buffer layer of PEDT(3,4-pyrazino-3',4'-ethylenedithio-2,2',5,5'-tetrathiafulvalenium) with ITO/PEDT/TPD/Alq$_3$Al structure. We observed a surface morphology by AFM(Atomic Force Microscopy), UV/visible absorption spectrum, and PL(Photoluminescence) spectrum. We obtained the UV/visible absorption peak at 358nm in TPD and at 359nm in Alq$_3$, and the PL peaks at 410nm in TPD and at 510nm in Alq$_3$. We also studied EL spectrum in the cell structure of ITO/(TPD+PEI)/Alq$_3$/Al.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1615-1620
• /
• 2017

The development of Virtual Reality (VR)-related technologies has resulted in the improved performance of VR devices as well as affordable price arrangements, granting many users easy access to VR technology. VR drawing applications are not complicated for users and are also highly mature, being used for education, performances, and more. For controller-based spatial drawing interfaces, the user's drawing interface becomes constrained by the controller. This study proposes hand interaction based spatial drawing system where the user, who has never used the controller before, can intuitively use the drawing application by mounting LEAP Motion at the front of the Head Mounted Display (HMD). This traces the motion of the user's hand in front of the HMD to draw curved surfaces in virtual environments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.318-320
• /
• 2018

When a ship sails on sea, it may be influenced by the environmental disturbance such as wind, wave, sea surface temperature, etc. These affect on the ship's speed, fuel consumption, safety and operating performance. It is necessary to find the optimal weather route of a ship to avoid adverse weather conditions which can put the crews in serious danger or cause structural damage to the vessel, machinery, and equipment. This study introduced how to apply A* algorithm based on sea trial test data for determining the optimal ship routes. The path cost function was modelled as a function of minimum arrival time or minimum energy depending on the time of various environment conditions. The specially modelled path-cost function and the safety constraints were applied to the A* algorithm in order to find the optimal path of the ship. The comparison of ship performances estimated by real sea trial's path and estimated optimal route during the voyage of the ship was investigated. The result of this study can be used to create a schedule to ensure safe operation of the ship with short passage time or minimum energy. In addition, the result of this study can be integrated into an on-board decision supporting expert system and displayed in Electronic Chart Display and Information System (ECDIS) to provide all the useful information to ship master.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.306-312
• /
• 2010

We have detected deoxynivalenol(DON) using a metal-oxide-semiconductor field-effect-transistor(MOSFET)-based biosensor. The MOSFET-based biosensor is fabricated by a standard complementary metal-oxide-semiconductor(CMOS) process, and the biosensor's electrical characteristics were investigated. The output of the sensor was stabilized by employing a reference electrode that applies a fixed bias to the gate. Au which has a chemical affinity for thiol was used as the gate metal to immobilize a self-assembled monolayer(SAM) made of 16-mercaptohexadecanoic acid(MHDA). The SAM was used to immobilize anti-deoxynivalenol antibody. The carboxyl group of the SAM was bound to the anti- deoxynivalenol antibody. Anti-deoxynivalenol antibody and deoxynivalenol were bound by an antigen-antibody reaction. In this study, it is confirmed that the MOSFET-based biosensor can detect deoxynivalenol at concentrations as low as 0.1 ${\mu}g$/ml. The measurements were performed in phosphate buffered saline(PBS; pH 7.4) solution. To verify the interaction among the SAM, antibody, and antigen, surface plasmon resonance(SPR) measurements were performed.

• Journal of Pharmacopuncture
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2009

Objective : This study was carried to identify the anatomical component of FTMM(Foot Taeyang Meridian Muscle) in human lower limb, and further to help the accurate application to real acupuncture. Methods : FTM at the surface of the lower limb was labelled with latex. And cadaver was stripped off to demonstrate muscles, nerves and the others and to display the internal structures of FTMM, being divided into outer, middle, and inner layer. Results : FTMM in human lower limb is composed of muscles, nerves, ligaments etc. The internal composition of the FTMM in human lower limb are as follows : 1) Muscle : Gluteus maximus. biceps femoris, semitendinosus, gastrocnemius, triceps calf, fibularis brevis tendon, superior peroneal retinacula, calcaneofibular ligament, inferior extensor retinaculum, abductor digiti minimi, sheath of flexor tendon at outer layer, biceps femoris, semimembranosus, plantaris, soleus, posterior tibialis, fibularis brevis, extensor digitorum brevis, flexor digiti minimi at middle layer, and for the last time semimembranosus, adductor magnus, plantaris, popliteus, posterior tibialis, flexor hallucis longus, dorsal calcaneocuboidal ligament at inner layer. 2) Nerve : Inferior cluneal nerve, posterior femoral cutaneous n., sural cutaneous n., proper plantar branch of lateral plantar n. at outer layer, sciatic nerve, common peroneal n., medial sural cutaneous n., tibial n. at middle layer, and for the last time tibial nerve, flexor hallucis longus branch of tibial n. at inner layer. Conclusions : This study proves comparative differences from already established studies from the viewpoint of constituent elements of FTMM in the lower limb, and also in the aspect of substantial assay method. We can guess that there are conceptional differences between terms (that is, nerves which control muscles of FTMM and those which pass near by FTMM) in human anatomy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.381-382
• /
• 2007

IZO/Ag/IZO (IAI) anode films for flexible organic light emitting diodes (OLEDs) were grown on PC (polycarbonate) substrate using DC sputter (IZO) and thermal evaporator (Ag) systems as a function of Ag thickness. To investigate electrical and optical properties of IAI stacked films, 4-point probe and UV/Vis spectrometer were used, respectively. From a IAI stacked film with 12nm-thick Ag, sheet resistance of $6.9\;{\Omega}/{\square}$ and transmittance of above 82 % at a range of 500-550 nm wavelength were obtained. In addition, structural and surface properties of IAI stacked films were analyzed by XRD (X-ray diffraction) and SEM (scanning electron microscopy), respectively. Moreover, IAI stacked films showed dramatically improved mechanical properties when subjected to bending both as a function of number of cycles to a fixed radius. Finally, OLEDs fabricated on both flexible IAI stacked anode and conventional ITO/Glass were fabricated and, J-V-L characteristics of those OLEDs were compared by Keithley 2400.