• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.182-183
• /
• 2014

Hemispherical dimples with diameter, ø=$60{\mu}m$ and depth, d= $30{\mu}m$ were created on the metal and ceramics surfaces using INYA 10 watt Laser of 1064 nm wavelength. This study reports the influence of dimple pitch on friction and wear behavior rather than dimple size, depth and density. LST was performed on the specimens with dimple pitch and density in the range of 80 to-$200{\mu}m$ and 44 to 7 %, respectively. Surface topography was analyzed by using roughness measurement, scanning electron microscopy (SEM), and optical microscopy. Friction and wear characteristics were analyzed on textured surfaces at lubricating environment to observe the effect of surface texturing on reduction of friction and wear. Reduction on coefficient of friction was achieved by more than 70% due to the dual behavior of dimples as wear (debris) traps and lubricant reservoirs. Wear reduced significantly for the textured surface as compared to the polished surface. Moreover, the friction coefficient of the textured specimens reduced with increasing load and speed which may be attributed to the transition of lubrication regime.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.136-146
• /
• 2017

We selected 6 plots ($100m^2$) located 2.2-3.8 km from Minamidake Crater on the north flank of Sakurajima Volcano. We conducted a field study to investigate the effects of volcanic activity on vegetation succession and surface erosion rate. The results showed that trees growing in plots further from the crater had a greater diameter at breast height (DBH), total height, and age. In addition, these plots had a greater number of woody plants and species, as well as a greater total cross-sectional area at breast height. The Fisher-Williams index of diversity (${\alpha}$) and the proportion of evergreen broad-leaved trees were higher in plots located further from the crater. Vegetation succession in these plots was not at the level of a climax forest. From 1972 to 2015, the timing for active volcano, the depth of volcanic ash layer, the dry density, and the pH of ground surface were lower for plots located further from the crater. Furthermore, the average annual sheet erosion from 1972 to 2015 was also lower for plots located further away from the crater. Overall, plots further away from the crater have a better environment for vegetation growth and a lower dry density of the volcanic ash surface layer. It is thought that lower dry density results in increased soil permeability, which impedes surface flow. In order to prevent debris-flow disasters, caused by mud and rock flow resulting from impaired soil penetrability, it is essential to promote soil development and restore penetrability by artificial vegetation restoration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.21-30
• /
• 2017

The surface temperature of disc brakes varies during braking, which can affect the friction and wear behavior of braking systems. In order to develop an efficient braking system, the friction and wear behaviors of brake materials need to be clearly understood. In this work, the friction and wear behavior of the C/C-SiC-Cu composite and the Al/SiC composite, which are used in disc braking systems, were investigated. Both the surface temperature and contact pressure were studied. A pin-on-reciprocating tribotester was used for this purpose, in order to control temperature and load. Results showed that the friction varied significantly with temperature and sliding distance. It was found that a transfer layer of compacted wear debris formed on the wear track of the two materials. These layers caused the surface roughness of the wear track to increase. The outcome of this work is expected to serve as a basis for the development of braking systems under various operating conditions.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.518-527
• /
• 2004

In this study, SiC whiskers were grown in porous alumina substrate in order to enhance the filtering efficiency, performance, and durability by controlling pore morphology. This experiment was performed by Chemical Vapor Infiltration (CVI) in order to obtain the whiskers on the inside of pores as well as on the surface of porous the A1$_2$O$_3$ substrate. The deposition behavior was changed remarkably with the deposition position, temperature, and input gas ratio. First, the mean diameter of whisker was decreased as the position of observation moved into the inside of substrate due to the reactant gas depletion effect'. Second, the deposition temperature caused the changes of the deposition type such as debris, whiskers and films and the change in morphology affect the various properties. When SiC films were deposited. the gas permeability and the specific surface area decreased. However, the whisker showed the opposite result. The whiskers increase not only the specific surface area and minimizing pressure drop but also mechanical strength. Therefore it is expected that the porous alumina body which deposited the SiC whisker is the promising material for the filter trapping the particles.

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.204-217
• /
• 2013

This study shows the geomorphological processes of Yuga alluvial fan at Dalseong-gun, Daegu in Korea, based on characteristics of geomorphological surfaces, analysis of geomorphological deposits and OSL age dating. Alluvial fans of this area are classified into three surfaces(YG-F1, YG-F2, YG-F3) and were formed by the depositional processes resulting from the changes in hydraulic geometry of flowing water which was a stream flowing out of mountains debouched on to a plain, not by a sudden decrease in surface gradient of river bed. YG-F3 surface, about 110,000 yr B.P.(MIS 5.4), was formed as Yongri river deposited a lot of debris. This result was due to the process that the deposition took place actively with the upward of base level as the last interglacial period began. Later, the denudation of the river valley and geomorphological surface constantly occurred and the local and seasonal changes were found in precipitation and stream discharge with the beginning of the interstadial of the last glacial stages(MIS 3), leading to YG-F2 formed by debris flow, earth flow, mud flow and stream flow. Then, short-term climate changes and temporal climate events repeatedly caused aggradation and denudation over time and going through these processes, YG-F1 is believed to have been made by earth flow or mudflow during the last glacial maximum(MIS 2).

• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.61-68
• /
• 2018

This paper deals with ground clutter model for FOD (foreign object debris) surveillance FMCW (frequency modulated continuous waveform) radar. In the FOD surveillance radar, it has received not only the signals reflected by FOD, but also the clutters of the surface of the runway and the grassland simultaneously. However, to detect the FOD, the clutter rejection algorithm is necessary because the RCS (radar cross section) of FOD is nearly same to RCS of the grassland. In addition, it is difficult to apply the MTI (moving target indicator) algorithm as the clutter rejection algorithm because both the FOD and the clutter coexist stationarily. Hence, to remove the stationary clutter, it is crucial to accurately generate clutter map considering the surface of road. In this paper, in order to generate the clutter map, the respective beat signal at every range bin is generated in the case of only the surface without FOD, and then the beat signal accumulated 100 times. And also, Weibull distribution is applied to the RCS value to take the scattering distribution of clutter into consideration. The simulation results show that FOD can be well detected by applying the generated clutter map to the FOD FMCW radar.

• The Korean Journal of Quaternary Research
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2002

In this paper, the writer attempts to clarify causes by general man and weather factor on forest fire occurrence in Kosong-Area, 1995-2001. The major results are summarized as follows: The forest fire at Kojin-ri, Sonyusil-ri and Majwa-ri occurred at the same area over 3 times and that Hakya-ri, Songdae-ri and Inhung-ri, at the adjoining land over 3times. In the total 46 times of forest fire, fire frequence was greatest in March(11 time) and April(11 time) followed by November(7 time), January(6 time), February(6 time). December(3 time), October(2 time). Hours on frequent forest fire are from 11:00 till 18:00. Number for forest fire occurrence by causes was greatest in military training followed by burning paddy fields, debris burning, burning agricultural debris, visiting a grave, cigarette and arson. Frequent forest fire in Kosong-Area coincide not only with above normal temperatures, but also with below normal relative humidity. When the strong winds appear at Kosong-Area, the properties of daily surface chart re the south high and north low pressure pattern in the Far East Asia.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.538-545
• /
• 2012

This study addressed soil disturbances following harvesting as well as soil physical and hydrological properties within three first-order headwater catchments characterized by ephemeral-intermittent streams. Four treatments representing a range of potential Best Management Practices(BMPs) for ephemeral-intermittent streams were used; BMP1, BMP2, clearcut and reference. This study includes 1 year of pre- and post-harvest observations. Results showed that post-harvest disturbances were closely related with harvesting intensity and generally tended to reflect changes in soil physical and hydrological properties following harvest with the except of bulk density and porosity. Forest clearcutting decreased macroporosity and saturated hydraulic conductivity, and increased soil resistence as a result of severe soil disturbances thereby increasing soil erosion. These impacts were reduced by implementing two BMP treatments during harvesting activities. The finding support the use of either BMP treatments for ephemeral-intermittent streams, however, the additional measure of leaving logging debris in BMP2 did not cover enough soil surface to reduce erosion.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.