• 한국진공학회지
• /
• 제6권4호
• /
• pp.321-325
• /
• 1997

LCD용 칼라 필터를 제작하는 방법으로 감광성 고분자(photosensitive polymer)에 광 리소그라피(photolithography)기술이 많이 이용되어지고 있다. 이로 인해 감광성 고분자 표 면의 물리적, 화학적 성질이 변하게 되는데, 이는 후속 공정인 플라즈마 식각이나 ITO 전극 의 증착 등에도 많은 영향을 주므로, 각 공정에 따른 이들 고분자의 표면 연구는 매우 중요 하다. 본 논문에서는 blue 칼라 필터의 고분자 표면에 대한 연구를 SIMS와 XPS를 이용하 여 수행하였으며, 표면의 거칠기 변화를 AFM을 통해 관찰하였다. SIMS와 XPS결과로부터 초기 공정인 blue 칼라 필터를 스핀 코팅하고 pre bake한 상태에서는 주로 칼라 필터의 주 성분인 단량체와 결합제의 고분자 물질이 표면에 드러나 있다가, 노광 과정을 거치고 post bake한 시료에서는 색깔을 내는 안료 성분이 표면에 드러남을 확인하였고, AFM을 통해서 는 post bake후에 표면에 더 거칠어 짐을 관찰하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.816-819
• /
• 2006

One of the most difficult parameters to measure in the sea is current speed and direction. Recently, efforts are being made to estimate the ocean current vectors by utilizing sequential satellite imageries. In this study, we attempted to estimated sea surface current vector (sscv) by using satellite ocean color imageries of SeaWifs around the Korean Peninsula. This ocean color image data has 1-day sampling interval and spatial resolution of 1x1 km. Maximum cross-correlation method is employed which is aimed to detect similar patterns between sequential images. The estimated current vectors are compared to the surface geostrophic current vectors obtained from altimeter of sea level height data. In utilizing the color imagery data, some limitations and drawbacks exist so that in warm water region where phytoplankton concentration is relatively lower than in cold water region, estimation of sscv is poor and unreliable. On the other hand, two current vector fields agree reasonably well in the Korean South Sea region where high concentration of chlorophyll-a and weak tide is observed. In the future, with ocean color images of shorter sampling interval by COMS satellite, the algorithm and methodology developed in the study would be useful in providing the information for the ocean current around Korean Peninsula.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.124-128
• /
• 2003

Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8% weight loss and 2.4% strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8% weight loss and 18% strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellowness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the premetallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.

• 인지과학
• /
• 제21권1호
• /
• pp.25-45
• /
• 2010

색상이 다른 점들이 서로 반대 방향으로 움직이는 무선점 자극을 중앙 영역에 제시하고, 주변 영역에는 이와 반대의 색상을 가진 무선점 자극을 제시하면 주변영역에 있는 점들의 속성은 중앙 영역에 있는 점들의 속성과 동일하게 지각되는 색상-운동 오결합 현상이 발견된다. 본 연구에서는 이러한 오결합이 중앙영역과 주변영역이 동일한 깊이 표면을 구성하지 못하는 상황에서도 여전히 발생하는 지를 알아보기 위해 실험 1에서는 주변영역의 점들을 중앙영역과는 다른 깊이에 제시하였고 실험 2에서는 주변영역의 점들을 주어진 깊이 범위 내에서 무선적으로 변화시켰다. 두 실험 결과 중앙과 주변영역의 점들이 동일 깊이에 제시된 조건과 비교해 볼 때 두 영역이 동일한 표면을 형성하지 못할 때 오결합 정도는 약화되었지만 완전히 사라지지는 않았다. 이러한 결과는 운동정보에 의한 표면뿐만 아니라 양안시차에 의한 표면정보가 오결합 과정에 영향을 주는 것을 보여준다.

• The Journal of Advanced Prosthodontics
• /
• 제13권1호
• /
• pp.1-11
• /
• 2021

PURPOSE. The study compared the color change, lightness, and translucency of hybrid resin ceramics exposed to toothbrush abrasion and surface treatment. MATERIALS AND METHODS. Four hybrid ceramics [Lava Ultimate (LU), Vita Enamic (EN), Shofu HC (SH), and Crystal Ultra (CU)] were compared with a glass-ceramic (Vita Mark II) control. One hundred and twenty specimen blocks were prepared using a precision saw machine. Specimens in each material were divided into four subgroups based on the surface treatment (polishing or staining) and a storage medium (water or citric acid). Simulated tooth brushing with a mixture of 100 RDA (radioactive abrasives) with 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Measurements for the color change, lightness, and translucency were measured after toothbrushing using a spectrophotometer. Statistical analysis compared outcomes using paired t-test, ANOVA, and Tukey post hoc test. RESULTS. The maximum color change was identified in SH (stained acid) [1.44 (0.40)], whereas the lowest was identified in EN (polished water) [0.66 (0.16)] material. The maximum and minimum loss of surface translucency was observed in SH (polished water) [12.3 (0.52)] and EN (stained acid) [6.5 (0.55)] specimens, respectively. Lastly, loss of lightness was the highest in VM (polished acid) [69 (0.95)], whereas the lowest was observed in CU (stained water) [56.7 (0.86)]. CONCLUSION. The comparison presented a significant effect of toothbrush abrasion on translucency and lightness of the hybrid resin ceramics. Color change was not significantly influenced irrespective of the storage medium employed. Surface staining demonstrated the preservation and stability of color and optical properties under the influence of toothbrush abrasion and chemical trauma.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.239-245
• /
• 2003

This study is to research on printing method by use of colorants extracted from Sappan wood. As for the research, the stability of paste added by mordants, steaming condition, optimal mordant concentration, change of surface color and colorfastness were measured. The experiment showed that guar gum were stability among the sodium-alginate, modified starch, guar gum. And the surface color was best when the streaming time was 60 minutes, mordant concentration 3g/l. And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Computers and Concrete
• /
• 제5권2호
• /
• pp.89-100
• /
• 2008

This research examines the engineering properties and color intensities of mortar containing different amounts of fly ash (0, 5, 10 and 20%) mixed at different water-to-binder ratios (w/b = 0.23, 0.47 and 0.59) and exposed at different temperatures (T = 25, 100, 200, 400, 600 and $800^{\circ}C$). Results show that there is greater mass loss on ignition with high w/b and higher temperatures. In addition, the color channel image analyzer (Windows software written in Delphi) is utilized to study the relationship between the curing temperature and intensity of three primary colors, red, green and blue (RGB), of the fly ash mortar specimens. The results show that the RGB intensities on the specimen surface increases from that at $25^{\circ}C$. The mortar specimen becomes white with increase in w/b but without the addition of fly ash. Moreover, for mortar specimens with greater content of fly ash, red on the specimen surface has the greatest increase in intensity at elevated temperature. Observation the variations in color on the specimen surface may help estimate the highest elevated temperatures that concrete structures can withstand.

• Journal of Astronomy and Space Sciences
• /
• 제14권1호
• /
• pp.1-17
• /
• 1997

The results of a restricted numerical simulation for the color gradients within globular clusters have been presented. The standard luminosity function of M3 and Salperter's initial mass functions were used to generate model clusters as a fundamental population. Color gradients with the sample clusters for both King and power law cusp models of surface brightness distributions are discussed in the case of using the standard luminosity function. The dependence of color gradients on several parameters for the simulations with Salpter's initial mass functions, such as slope of initial mass functions, cluster ages, metallicities, concentration parameters of King model, and slopes of power law, are also discussed. No significant radial color gradients are shown to the sample clusters which are regenerated by a random number generation technique with various parameters in both of King and power law cusp models of surface brightness distributions. Dynamical mass segregation and stellar evolution of horizontal branch stars and blue stragglers should be included for the general case of model simulations to show the observed radial color gradients within globular clusters.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.15-20
• /
• 1992

이 논문에서는 화가의(Painter's) 알고리듬을 사용하여 3차원 자유형상곡면(Three dimensional free form surface)을 가시화하는 방법을 개발하였고, 특히 선체형상은 Open 균일 B-Spline 곡면으로 정의하였다. 컴퓨터그래픽스를 응용하여 와이어프레임, 숨은면제거, 묘영등의 가시화를 위한 프로그램을 완성하였다. 또한 선체곡면의 순정을 검토하기 위해 Gaussian 곡률값을 15등급으로 구분하여 등급별 색(color)처리 하였다.