• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.628-629
• /
• 2009

A variety of technologies have already been developed to capture energy from the ocean waves, this one is simple to construct. Rather then looking at the surface waves, the technique used lets the waters current beneath the waves directly drive the rotors. The novel ocean wave energy convertor consists of savonius rotor which is mounted in the ocillating water column (OWC) chamber. This study investigates the performance of a 3 blade and 5 bladed savonius rotor under same wave condition using commercial CFD code. Initially the performance analysis of savonius type turbine have been carried out with conventional three bladed curved rotors. From the experieneces of the simulations, 5 bladed savonius rotor have been developed and studied. Performace caracteristics of the 5 bladed savonius rotor has been evaluated and the results obgtained are comopared with the conventional three bladed curved rotors.

• KSTLE International Journal
• /
• v.5 no.2
• /
• pp.44-48
• /
• 2004

A new type slider with optical components is going to be introduced on market for portalbe and high capacity disk drive, and it will show a great potential for high performance drive in the paper the dynamic behavior and static characteristics of silder for a small form factor optical disk drive have been investigated numerically by an in-house simulation code using FEM. A curvature effect is found when a slider is applied to a relatively small disk, which makes rolling characteristics worse due to the negative pressured generated at the air bearing surface because of the curvature of small disk diameter.

• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.43-48
• /
• 2005

The production of metal strip with uniform thickness and flatness are two important problems associated thin strip rolling. The thickness and flatness of strip are affected by the flattening of contact surface between strip and roll, the elastic recovery and the bending of roll. Especially, the flatness of the strip is greatly affected by bending deflection of roll. The roll must be designed considered the elastic deformation of roll. This study describes the measurement of thickness and flatness of strip and shows the crown roll for producing flat strip. But it is difficult to produce the crown roller. The cross rolling that is a simple method which can produce the flat strip is introduced and it is found the optimal cross angle for improvement of flatness of plate. These problems are solved by the MARC code on the basis of elastic-plastic material and the updated Lagrangian formulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.46-52
• /
• 2010

In this paper, emission analysis during cold start period of CVS-75 mode in LPG vehicle was performed to find out proper operating conditions of SAI(Secondary Air Injection) system. In order to meet SULEV target, the simulated emission system had a SAI system as well as a MCC(Manifold Catalytic Converter) and a UCC(Under body Catalytic Converter). Using commercial 1-D code AMESIM, in which 7 step global surface chemical reactions of Langmuir-Hinshelwood type were adopted, transient emission analysis in the exhaust system during cold start period of CVS-75 mode were carried out to figure out the effects of flow rate, duration of supply air on HC, CO, NO emission.

• Journal of the Korean Society of Combustion
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2012

A slag building simplified model was developed to determine wall heat flux of a Shell 300 MW coal gasifier. In the model 4 layers(particulate, sintered, molten slag, solidified slag) were considered and mass conservation and energy balance were used to obtain each slag layer's thickness and surface temperature. Thermo-chemical and fluid charateristics of the gasifier were studied with and without considering the slag model using commercial CFD code FLUENT. Consideration of the slag layer did not affect syn-gas mole fractions. However, the slag layer caused to increase the exit gas temperature by about 50 K.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2003

In order to test the predictability of the wind resource assessment computer code in our country a field experiment and prediction by WAsP has been compared. A field experiment has been performed in Songdang province, Jeju island, composed of sea, inland flat terrain, a high and a low slope craters. For this experiment, four meteorological towers have been installed at seashores, inland flat and on a crater. Wind resource at one site is predicted by WAsF with the meteorological data at the other three sites. The comparisons show that the WAsP preditions give better agreement with experimental data by adjusting the roughness descriptions.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.556-565
• /
• 2003

A quality assurance safety assessment database, called QUARK (QUality Assurance Program for Radioactive Waste Management in Korea), has been developed to manage both analysis information and parameter database for safety assessment of low- and intermediate-level radioactive waste (LILW) disposal facility in Korea. QUARK is such a tool that serves QA purposes for managing safety assessment information properly and securely. In QUARK, the information is organized and linked to maximize the integrity of information and traceability. QUARK provides guidance to conduct safety assessment analysis, from scenario generation to result analysis, and provides a window to inspect and trace previous safety assessment analysis and parameter values. QUARK also provides default database for safety assessment staff who construct input data files using SAGE(Safety Assessment Groundwater Evaluation), a safety assessment computer code.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.145-148
• /
• 1995

To provide better understanding of a solder joint design criteria, mathematical models have been developed to calculate the shape of the solder fillets formed between the pad and lead. The effects of parameters such as solder volume and pad dimensions are described with this model. In this study, a systematic way to determine the design criteria of the SMT from the predicted 3D solder joint profile is proposed. The solder joint profile is calculated using the available 3D FEM code which minimizes the system energy due to the surface tension and gravity. The solder joint profiles of gullwing-type lead such as QFP and SOP are calculated for design parameters, and acceptable ranges are obtained. The result shows that the pad length is the most significant factor compared with the pad width and pad area.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.628-635
• /
• 2007

As the hydrologic cycle is transformed by the expansion of impermeable area as a result of the urbanization, the function of an ecosystem is deteriorated by the transformed hydrologic cycle. In this study, a SWMM code was modified to have a groundwater pumping option about rivers-aquifer interaction to be possible. The modified SWMM was applied to continuous simulations of urban runoff from Hakuicheon watershed and it was used to analyse the effect of a groundwater pumping. The modified SWMM overcame the limitation of the ground subroutine that it only simulate groundwater inflow from ground to rivers. The result of continuous simulation of groundwater pumping is that surface runoff, groundwater runoff and groundwater level are well simulated, and Modified SWMM expressed groundwater runoff by negative number (-) when groundwater level is less than river stage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1917-1921
• /
• 2005

The Bar code, RFID in the standard recognition method for the goods automation of tire manufacture process, sometimes problem occurs with the damage due to a high tension, high fever. So it has problem that needs many instruments to attach it. In this paper, in the letter of tire's surface the Mold ID which has a specific feature it proposed the algorithm for the location detection of acquisition and Mold ID of the image which uses 3 dimension cameras.. It described the method which recognizes the each letter of Mold ID from the location which is detected.