• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.1
• /
• pp.54-60
• /
• 1995

This paper reports on the changes of equilibrium moisture contents and specific surface areas of Poplar wood(Populus euramericana) for various steam explosion treatments. Equilibrium moisture contents(EMC) and specific surfaces of steam exploded woods were measured under the moisture adsorption course at 25$^{\circ}C$, and compared with those of other materials and wood meals. The EMCs of steam exploded wood meal were 1~5% less in comparison with that of wood meal. In the case of delignified steam exploded wood meal and delignified wood meal, the same tendency was appeared too. But absolute values of EMCs for delignified wood meals were larger than those of the wood meal. For the changes of EMC by the steam exploded conditions, the EMC decreased with the increase of the steam explosion pressure. On the other hand, specific surface areas were calculated from BET plots based on amounts of monomolecular vapor adsorption of various wood meals. Specific surface areas of the wood meal and delignified wood meal were 90~145, 34~90($m^2/g$) respectively, and which were greater in comparison with those of steam exploded wood meals and delignified steam exploded wood meals. From these results, it is considered that the amount of water vapor adsorption was decreased by the increase of the crystallinity, effect of heat treatment, and coating by melted lignin in during the steam explosion.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.433-442
• /
• 2016

In this study, we examine future changes in surface radiation associated with cloud amount and aerosol emission over East Asia. Data in this study is HadGEM2-CC (Hadley Centre Global Environmental Model version 2, Carbon Cycle) simulations of the Representative Concentration Pathways (RCPs) 2.6/4.5/8.5. Results show that temperature and precipitation increase with rising of the atmosphere $CO_2$. At the end of $21^{st}$ century (2070~2099) relative to the end of $20^{st}$ century (1981~2005), changes in temperature and precipitation rate are expected to increase by $+1.85^{\circ}C/+6.6%$ for RCP2.6, $+3.09^{\circ}C/+8.5%$ for RCP4.5, $+5.49^{\circ}C/10%$ for RCP8.5. The warming results from increasing Net Down Surface Long Wave Radiation Flux (LW) and Net Down Surface Short Wave Radiation Flux (SW) as well. SW change increases mainly from reduced total Aerosol Optical Depth (AOD) and low-level cloud amount. LW change is associated with increasing of atmospheric $CO_2$ and total cloud amount, since increasing cloud amounts are related to absorb LW radiation and remit the energy toward the surface. The enhancement of precipitation is attributed by increasing of high-level cloud amount. Such climate conditions are favorable for vegetation growth and extension. Expansion of C3 grass and shrub is distinct over East Asia, inducing large latent heat flux increment.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.17-23
• /
• 1994

Carboxylic acid group gradient surface where the density of carboxylic acid groups changes gradually along the sample length was prepared. Carboxylic acid group gradient surface was produced by the treatment of low density polyethylene sheet using a corona with gradually increasing power, followed by the grad polymerization of acrylic acid. The prepared gradient surface was characterized by the measurement of water contact angle, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.276-279
• /
• 1995

This paper is re;ated to the splits at the side of chips and the changes of surface roughness according to cutting conditions in precsion cutting. Compared with MCD, the surface roughness of workpiece cut by PCD was inferior at a small feed. But, there were no significant difference between MCD and PCD tool above a certain feed in surface roughness

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.348-354
• /
• 1994

The changes of surface activities in the aquaous solutions of mixed surfactants composed of linear sodium dodecylbenznesulfoate (LAS), polyoxyethylene nonyl phenylether (PE, EO=10) and polyethylene glycol monolauryl ether (LE, EO=25) have been studied. Addition of nonionic surfactants to LAS reduces the surface tension, especially at the lower concentration than cmc. The interfacial tension of olive oil/LAS was lower than the other surfactant solutions. The removal of triolein from cotton fabrics by nonionic surfactants and mixtures is higher than by LAS. The addition of NaCI to surfactant solutions even though reduces surface tension smaller but enthances oil removal more than that of $CaCl_2$.

• Journal of the korean society of oceanography
• /
• v.32 no.2
• /
• pp.69-74
• /
• 1997

Depth profiles of organic carbon (C), biogenic silica (Si), and inorganic phosphorus (P) in Maxwell bay sediments were determined to investigate paleoclimatic changes during Holocene. Organic C and biogenic Si contents generally show a down-core decrease trend, which appears to be mostly controlled by their vertical fluxes through productivity in the surface waters, but it is uncertain that inorganic P contents are directly influenced by productivity changes with time. Before 4000 yr B.p. marine productivity seemed to be almost zero because ice permanently covered the surface waters of the study area. As the climate started to become relatively warm at 4000 yr B.p., ice was sporadically melted in the surface waters and thereby marine productivity gradually increased until 1500 yr B.p. For the last 1500 year, marine productivity must be high enough to overcome the dilution by high terrigenous sedimentation, thus that period was the warmest during the last 6000 year.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.281-284
• /
• 2003

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment is investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) are hot extruded to make I-shape bars at 380$^{\circ}C$, then the bars are solution treated at 480$^{\circ}C$ for 2hrs followed by artificial aging at 120$^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consists of elongated grains, however, fine equiaxed grains are mainly observed around surface. The microstructural gradient suggests that different restoration process can proceed during the hot extrusion. For B1 and B2, different grain growth behaviors are found around the surface during the post heat treatment. Rapid grain growth behavior around the surface is discussed related with the crystallographic orientation of the grain.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.265-270
• /
• 1997

Effect of modified atmosphere packaging conditions on quality changes of dry jujube was investigated. Dry jujubes with moisture content of 26.7% were packaged in PET/Al/PE film pouches with modified atmospheres. The tested packages include those with normal air, vacuum, CO2 flushing, N2 flushing and O2 scavenger. Packages were stored at 25$^{\circ}C$ for 6 months, during which ascorbic acid concentration, browning level, titratable acidity and surface color were measured. Generally modified atmosphere packages could improve quality retention of dry jujubes except that vacuum package resulted in large surface color change. CO2-flushed package showed the best quality retention of high ascorbic acid content and low browning during 112 days, but caused high amounts of ascorbic acid destruction and browning in longer storage. In all the modified atmosphere packages titratable acidity reached a maximum followed by decline and subsequent rise, while it increased linearly with time in normal air package. Considering ascorbic acid retention browning level and surface color changes during 112 days, the packages of CO2 flushing and N2 flushing were better than others.

• Food Science and Preservation
• /
• v.8 no.2
• /
• pp.157-163
• /
• 2001

Optimal conditions for hot water extraction of Liriope spicata tuber were investigated with changes in solvent ratio(2∼6 fold) and heating time(1∼5 hr) by response surface methodology. The content of extractable solids increased with an increased in solvent ratio, and the highest content showed at heating time of 3 hr. The content of total steroid saponin increased with a decrease in solvent ratio, and increased with an increase in heating time at increasing the solvent ratio. The content of non-reducing sugar containing oligosaccharides at a lower solvent ratio didn’t show changes depending on heating time, while that at a higher ration decreased with an increase in heating time. Optimal extraction conditions using hot water as the limited conditions of 15∼18% extractable solids, 1.5∼2.0% total steroid saponin, 6∼8% reducing sugar, 6∼7% non-reducing sugar and 13∼15 brix were 3 hrs of heating time and 4 fold of solvent ratio.