• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1998

The dispersing behaviors of oligomer-type anionic surfactants, cooligomers of diethyl maleate(CmD-Na) or maleic anhydride (CmM-Na) and $C_4{\sim}C_{16}$ alkyl vinylether, which have a different alkyl chain length of the hydrophobic group or degree of polymerization, were studied on the aqueous suspension of ${\alpha}-$ and ${\beta}-$ copper phthalocyanine and carbon black particles. In case of the side alkyl chain length of $C_4{\sim}C_{10}$ of CmD-Na, the dispersing actions were good in the concentration range of 0.01 to 0.1%. Especially, side alkyl groups played an important role in the orientation adsorption on the surface of pigment particles, and oligomers having smaller degrees of polymerization were more effective in the dispersing action, but did not affect the dispersability of carbon black.

• Journal of the Korean Chemical Society
• /
• v.37 no.6
• /
• pp.570-576
• /
• 1993

1-, 3-, 9-, and 21-Monolayer Langmuir-Blodgett(LB) films of stearic acid were deposited on silver-coated glass slides at the surface pressure of 30 mN/m. Fourier transform infrared(FTIR) reflection-absorption spectra (RAS) of these LB films were recorded at various temperatures from 31 to $72^{\circ}C.$ The spectra at $31^{\circ}C$ exhibited characteristic features of highly perpendicular orientation of the hydrocarbon chain. In the 1-monolayer LB film, the C=O stretching band was not observed, presumably due to the image dipole effect on the silver surface. In the 1-and 3-monolayer LB films, the trans isomer of stearic acid was prominent, but the cis isomer was dominant in the 21-monolayer LB film. FTIR-RAS measurements at an elevated temperature indicated that the chain melting temperature increases and approached to the bulk melting point with increasing the number of monolayer, except for the 1-monolayer LB film which has a higher melting temperature than the 3-monolayer film due to the strong interaction with the silver substrate.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.68-75
• /
• 2022

The breathable film refers to a high-functional film that allows gas and water vapor to pass through very fine and sophisticated pores but not liquid. In this research, the breathable film was prepared based on linear low-density polyethylene (LLDPE) and CaCO₃ particles by extrude method. The LLDPE composite film containing CaCO₃ particles had excellent mechanical properties and functionalties. The drawing is a technologically simple and excellent method for improving the mechanical properties of composite films. In this work, the effects of draw ratio on morphology, crystallinity, pore size distribution, mechanical properties, and water vapor permeability of the films were examined. The results revealed that both surface morphology and breathability were affected by the influence of chain orientation and crystal growth with increasing the draw ratio. The mechanical properties were improved with increasing the draw ratio.