• International Journal of Vascular Biomedical Engineering
• /
• v.4 no.1
• /
• pp.27-30
• /
• 2006

Background; Pleural micro-metastasis of lung cancer is detected by touch print cytology or pleural lavage cytology, but its prognostic impact has not elucidated yet. We hypothesize that recurrence may depend on the amount of tumor cells disseminated in pleural cavity, if the invasiveness of all cancer is the same. To predict the amount of tumor cells disseminated in pleural cavity, we need pleural surface area, distributed pattern of cells and concentration of cells per unit area. Human pleural surface area has not reported yet. In this report, we calculate the normal human pleural surface area using CT image data processing. Methods; Twenty persons were checked CT scan, and we obtained the data from each image. In order to calculate the pleural surface, the outline of lung was firstly extruded from CT image data using home-made Digitizer program. And the distance between CT images was calculated from the extruded outline. Finally a normal human pleural surface was calculated from function between the distance of consecutive CT images and the calculated length. Results; Their mean age is $65{\pm}12$ years old (range $26{\sim}77$), body weight is $62{\pm}9\;kg\;(48{\sim}80)$, and height is $167{\pm}6\;cm\;(156{\sim}176)$. The number of images used is $36{\pm}7\;(24{\sim}51)$. Pleural surface area is $211,888{\pm}35,756\;mm^2\;(143,880{\sim}279,576)$. Right-side pleural surface area is $107,932\;mm^2$ and Lt is $103,955\;mm^2$. Costal, mediastinal and diaphragmatic surfaces of right-side pleura are $77,483\;mm^2,\;39,057\;mm^2,\;and\;8,608\;mm^2$ respectively, and left-side are $72,497\;mm^2,\;35,578\;mm^2,\;and\;4,120\;mm^2$ respectively. Conclusion; Normal human pleural surface area is calculated using CT image data at first and the result is about $0.212\;m^2$.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.97-105
• /
• 2000

One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of axisymmetric products is calculated by mathematical or graphical methods. However, in the case of non-axisymmetric products, it is difficult to calculate the exact surface area due to errors as separated components. Fortunately, it is possible for elliptical products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. So, in this study, a surface area calculating system is constructed for a design of blank shape of deep drawing products. This system consists of input geometry recognition module and three dimensional modeling module, respectively. The suitability of this system is verified by applying to a real deep drawing product. The system constructed in this study would be very useful to reduce lead time and cost for determining the blank shape and dimensions.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.689-698
• /
• 1997

The purpose of this study is to develop the well-fitted brassieres by observing the changes in the breast sizes and shapes, the surface area and the volume of the breast through the arm movements of 3 types (0$^{\circ}$, 90$^{\circ}$ and 180$^{\circ}$) in vertical motion. The subjects are females, who are aged twenties and wearing a brassiere size 70B, In particular, to obtain the measures regarding the surface area and the volume of the breast, replicas are made at each motion. The results of this study are as follows: 1. The changes in the breast sizes and shapes at each motion By increasing the motions of the arm movement, the following measure items are inclined to decrease: Shoulder length, Side neck point~B.P., Front neck point~B.P., Horizontal length of the cup, Upper bust circumference, Bust circumference, Upper bust depth, Bust depth, Under bust depth, Nipple to tipple breadth, Horizontal distance of bust, Bust height, Cup size. By increasing the motions of the arm movement, the following measure items are inclined to increase: Center point of shoulder~B.P., Shoulder point~B.P., Armpit~ lowest point of breast drooping, Upper bust point~B.P., B.P~Under bust point, Under bust line, Width of gap between breast, Vertical distance of Bust. 2. The changes in the surface area and volume of breast at each motion By making the replica to observe changes in the surface area, which are sectioned to 4 parts(area 1 to area 4) , and volume of breast at each motion, the results are as follows: At 0$^{\circ}$ and 90$^{\circ}$, the sizes of each part are ordered as the following: area2> areal> area4> area3. At 180$^{\circ}$, the sizes of each part are ordered as the following: areal> area2> area4> area3. Through these orders, it is found that the upper and inside part of the breast has the inclination to increase so long as the motions of the arm movement increase. Also, the total surface area increases so long as the motions of the arm movement increase. The volume of the breast increase when the surface area of the breast increases. As a result of the F-test on the changes in the each surface areas, the surface area and volume by arm movements, the significant differences among the each surface areas and the surface area are not found.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.3 s.28
• /
• pp.277-284
• /
• 1988

The purpose of study was to measure to body Surface area and the rational rate of Korean adult's women. The subjects are 20 years old to 49 years old women (Their bust width ranges from 74.5 to 101.5 cm, the height from 144.6 to 163.3 cm, the weight from 44.2 to 74.0 kg, Rohrer Index from 1. 02 to 1. 89). As the experimental method, both the gypsum method, by which the shape of body can be copied as it is, and weighing method, from which planed body surface area can be measured with consistant thickness of polypropylene film used. The results were obtained as follows. 1. After dividing the Korean adult's women into four groups (single and married women in their twenties, those in their thirties, those in their fourties). The change of body surface area was reviewed in accordance with age groups. No great difference among age group was showed in whole body surface area. 2. average value of body surface area is 1, 514m^2 and the part of trunk shows the biggest difference to the age groups. 3. After dividing the middle of body into two groups, the relation of symmetry of each parts is reviewed with difference in body surface area. The results shows that the part of head & neck and lower limbs are symmetrical. The part of trunk and upper limbs are unsymmetrical. 4. Regional rates of each part of whole body surface area are follows. head $4.98\%$, each-lobes $0.46\%$, neck $2.01\%$, face$2.48\%$, upper trunk $19.64\%$, lower trunk $13.91\%$, upper armpits $1.76\%$, lower armpits $12.52\%$, hands $4.64\%$, thighs $18.89\%$, lower legs$13.10\%$, feet $6.01\%$.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.117-125
• /
• 2023

This study aimed to analyze the recent status and changes in impervious surface areas and their ratios across regions in Gyeongsangnam-do, providing fundamental data for regional development and impervious surface management. Based on the 'Guidelines for Calculating Water Cycle Management Indicators for Nonpoint Pollution Source Control(Ministry of Environment)', we processed the land characteristics survey map(shapefile) from 2018 and 2022 to analyze impervious surface area and their rates by administrative boundaries. The impervious surface area in Gyeongsangnam-do increased from 75,652 ha in 2018 to 81,055 ha in 2022, with the rate rising by 0.51% from 7.18% to 7.69%. The average of impervious surface area across 545 eupmyeon units expanded by approximately 9 ha, from 139.8 ha in 2018 to 148.8 ha in 2022, with the rate increasing by 0.71%. Concurrently, the whole population declined by 2.8% while the number of households surged by 6.4%, correlating with the growth in impervious areas. Despite population decreases, factors such as population migration, increased household fragmentation, new residential developments, and industrial facility expansions have consistently contributed to the rise in impervious surface area. Notably, even in areas with high impervious surface area rate, significant disparities existed between urbanized areas and predominantly rural regions. Furthermore, about 333 units(61% of the whole eupmyeons), showed negligible changes in their impervious surface area rate, with an increase of less than 0.5%.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.846-848
• /
• 2003

Analysis of UHI in Busan region using Landsat TM data. Between 1987 and 1997 surface temperature increased clearly. Land usage of Busan is construed that instigate UHI changing into industry and commerce area. Also, intensity of UHI in surface temperature appeared strongly in industrial area and business area. On the contrary, residential area, mountain area, suburb area did not appear strongly.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.458-463
• /
• 2009

The purpose of this study was to evaluate the changes of surface runoff by comparisons between burned and unburned area after forest fire. The amount of surface runoff in burned area was more high 1.72 times in the year of fire, 1.44 times in one year later, 1.38 times in five years later and 1.16 times in ten years later than those of unburned area. Therefore, surface runoff in the burned area almost tended to be stabilized like unburned area ten year later after forest fire. The most affecting factors on the amount of surface runoff in burned and unburned area were number of unit rainfall, number of rainfall accumulated and unit rainfall. But coverage was shown to mitigate the amount of surface runoff in burned and unburned area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.115-118
• /
• 2005

A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, real-time measurement and compensation is required to guarantee the form accuracy of micro features while machining a workpiece with a large surface area. In this study, a method is suggested for real-time measurement of geometric error for the micro grooving of a large flat surface using a laser displacement sensor. The measurements are demonstrated for the workpieces with large surface areas and the experimental results show that the waviness and form error are well detected.