• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.197-200
• /
• 2002

The electrooxidation of methanol was studied using carbon-supported PtRu(1:1) alloy nanoparticles In sulfuric acid solution for application to a direct methanol fuel cell. The GNF-supported catalyst showed excellent catalytic activities compared to those of Vulcan XC-72. The structure and electrocatalytic activity of carbon-supported electrocatalyst were investigated using X-ray diffraction (XRD), Transmission electron microscopy (TEM), cyclic voltammetry (CV), chronoamperometry (CA), X-ray photoelectron spectroscopy (XPS). The CV and CA confirmed the advantage of GNF as the supporting material. This can be explained by assuming that the enhanced activities of GNF-supported catalyst for methanol electrooxidation were caused by the unique properties of GNF.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.81.3-81.3
• /
• 2015

Carbon Fiber Re-enforced Polymer (CFRP) has replaced steel, especially for mobile devices. As CFRP is stiff and light-weight, it has been applied to airplane, sport car, golf clubs, semiconductor transporter, satellites, etc. In the telescope, the plastic material was introduced to the supporting tubes or rods connecting the primary mirror assembly and the secondary mirror structure. Nowadays, even the mirror itself is produced by CFRP. In this poster, material properties and production of CFRP telescopes are presented, and pros and cons are discussed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.42-45
• /
• 2001

The characteristics of smart skin for wireless LAN system under compression load are investigated. The smart skin structure is composed of 3 layers of face material and 2 layers of core material. Theoretical formula for determining buckling load is derived by Rayleigh-Ritz method and compared with experimental result. The maximum length of specimen that buckling does not occur is determined by only face material. In the experiment, if load supporting capability and the antenna property such as radiation pattern and reflection coefficient were examined.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.11a
• /
• pp.126-127
• /
• 2003

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.582-587
• /
• 2006

Since Kyung-Bu High Speed Line has been introduced, a railway electrification has been proceeded rapidly. Therefore, in this study, a specification and application standard for an overhead catenary supporting thin walled steel pole using STKT590 material are proposed in order to improve an economical efficiency. To decide the specification, strength analysis, deflection analysis, deflection test and fracture test are performed. If the supporting structures using high strength materials such as STKT590 are installed, the advantages of cost by the materials price reduction and demand and supply are expected.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.35-40
• /
• 2010

A comprehensive comparative investigation of small carbohydrates in laser desorption ionization was performed on supporting materials composed of sodiated 2,5-dihydroxybenzoic acid (DHB), carbon nanotubes, an ionic liquid matrix of DHB-pyridine, a binary matrix of DHB-aminopyrazine, zinc oxide nanoparticles, and gold nanoparticles. The abundance of $[M+Na]^+$ ions, where M is glucose or sucrose, was compared for each supporting material. The highest sensitivity for both glucose and sucrose, with a detection limit of 3 pmol, was observed with carbon nanotubes. Both carbon nanotubes and the ionic liquid matrix exhibited the highest reproducibility.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1183-1191
• /
• 2001

The metallorganic chemical vapor deposition (MOCVD) method has been used to prepare TiO2 thin films for the degradation of hazardous organic compounds, such as 2-chlorophenol (2-CP). The effect of supporting materials and metal doping on the photocatalytic activity of TiO2 thin films also has been studied. TiO2 thin films were coated onto various supporting materials, including stainless steel cloth(SS), quartz glass tube (QGT), and silica gel (SG). Transition metals, such as Pd(II), Pt(IV), Nd(III) and Fe(III), were doped onto TiO2 thin film. The results indicate that Nd(Ⅲ) doping improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 ${\mu}m)$ appears to be the best support. An optimal amount of doping material at 1.0 percent (w/w) of TiO2-substrate thin film gives the best photodegration of 2-CP.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.797-816
• /
• 2014

Cooling tower is analyzed as an assembly of layered nonlinear shell elements. Geometric representation of the shell is enabled through layered nonlinear shell elements to define the different layers of reinforcements and concrete by considering the material nonlinearity of each layer for the cooling tower shell. Modal analysis using Ritz vector analysis and nonlinear time history analysis by direct integration method have been carried out to study the effects of the inclination of the supporting columns of the cooling tower shell on its dynamic characteristics. The cooling tower is supported by I-type columns and ${\Lambda}$-type columns supports having the different inclination angles. Relevant comparisons of the dynamic response of the structural system at the base level (at the junction of the column and shell), throat level and at the top of the tower have been made. Dynamic response of the cooling tower is found to be significantly sensitive to the change of the inclination of the supporting columns. It is also found that the stiffness of the structure system increases with increase in inclination angle of the supporting columns, resulting in decrease of the period of the structural system. The participation of the stiffness of the tower in structural response of the cooling tower is fund to be dependent of the change in the inclination angle and even in the types of the supporting columns.

• Culinary science and hospitality research
• /
• v.11 no.4 s.27
• /
• pp.118-133
• /
• 2005

In the management activities of head office in supporting franchisees in domestic food-service enterprises, the raw material supply plays a positive role to support franchisees' operation activity and it comes into conflict with them at the same time. In this paper, I have tried to find out the relationship between raw material supplying and the satisfaction of the franchisees by experimental research in order to research the route of head office's raw material supplying. To sum up the results, it was found out there is no meaningful relationship between the raw material supplying and the franchisees satisfaction (intention to renew the agreement), It indicates it would be more effective for the franchisees to buy the raw materials from the suppliers developed by the franchisees except some key materials in order to reduce the conflicts with the franchisees.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.311-322
• /
• 1998

American Society for Testing and Materials (ASTM) standard test method PS 070-97 has been created for measuring fracture toughness of advanced ceramics. PS 070-97 includes three test methods which use beams in bending: chevron notch (CNB), single-edged precracked beam (SEPB), and surface crack in flexure (SCF). Supporting data has been collected through several Versailles Advanced Materials and Standards round robins. This paper discusses the evolution of the standard including the rationale for the choice of the three methods and the specifications in the standard. Progress on Standard Reference material 2100 which will have certified values of fracture toughness is presented.