• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1994-2004
• /
• 1996

Numerical calculation was applied to supersonic under-expanded jets, and compared with the results of a linear theory and other experiments. TVD difference scheme was employed to solve 2-dimensional and axisymmetric inviscid Euler equation. This paper aims to explore the effects of angle of divergence and design Mach number of nozzle on the structure of under-expanded jets. The angle of divergence was varied from 0 to 20 deg. The results show that the length of the first cell of the under-expanded jets decreases and Mach disk generates at lower nozzle pressure ratio, if the angle of divergence or design Mach number of nozzle increases. The distance from the nozzle exit to Mach disk in 2-dimensional jets becomes much larger than that of axisymmetric jets, and the widths of the jet boundary and the barrel shock wave are also larger than that of axisymmetric jets. Calculation results indicate that the configuration of the under-expanded jets is strongly dependent on the nozzle pressure ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.479-484
• /
• 2000

For the purpose of a cost effective design of practical subsonic/supersonic ejector systems, an experiment was carried out using a superheated steam as a primary driving flow. The superheated steam jet was produced by several different kinds of subsonic and supersonic nozzles. The secondary flow of atmospheric air inside a plenum chamber was drawn into the primary steam jet. The vacuum performance of the plenum chamber was investigated for a wide range of the ejector operation pressure ratio. The result showed that the static pressure of the mixed flow at the ejector throat is only a function of the ejector operation pressure ratio, regardless of the primary nezzle type employed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.747-750
• /
• 2002

An attempt to reduce supersonic Jet noise is carried out by using two steady microjets in a round jet. The jet is issued from a round sonic nozzle with an exit diameter of 10mm. Two micro-nozzles with an inside diameter of 1mm each are installed on the exit plane with an off-axis angle of $45^{\circ}$. Far-field noise was measured at a location 40 diameters off the jet axis. The angles between a microphone and the jet axis are $45^{\circ}\;and\;90^{\circ}$. For an injection rate less than $1{\%}$ of the main jet, screech tones were completely suppressed by the microjets. The reduction in the ovelall sound pressure levels were $2.4\;and\;2.7\;dB\;for\;90^{\circ}\;and\;45^{\circ}$ directions, respectively. The enhancement of mixing/spreading of the jet by the microjet was negligible. The reduction of noise is probably due to distorted shock cell structures and/or broken large scale vortical structures by the microjets.

• 한국추진공학회지
• /
• 제7권4호
• /
• pp.53-62
• /
• 2003

램제트 및 스크램 제트 엔진의 개발을 위한 초음속 지상 추진 시험설비는 고고도, 고속 비행 조건을 모사하기 위해 고도 및 마하수에 따른 공기의 전압력과 전온도, 연소실 유입공기의 산소 농도 및 비열비 등의 조건을 구현할 수 있어야 한다. 그리고 비행체에서 발생하는 경사충격파의 영향을 모사할 수 있어야 한다. 본 연구에서 설계한 지상 추진 시험 설비는 초음속 자유 제트 불어내기 방식으로, 고압공기 공급원(최대 가압 압력 32MPa), 가열기(vitiation 타입), 초음속 디퓨저, 이젝터 및 시험부(노즐 출구=200mm${\times}$200mm)등으로 구성되어 있다.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.697-709
• /
• 1996

Supersonic axisymmetric jets issuing from various kinds of nozzles with a throat diameter of a few millimeters were experimentally investigated. The exit Mach number and Reynolds number based on the throat diameter of nozzle were in the range of 1.0 ~ 5.9 and 8.4$\times$ $10^4$ ~ 2.9$\times$$10^6$, respectively. The nozzle pressure ratio was varied from 5 to 85. Present paper aims to offer fundamental information of the supersonic free-jets, with an emphasis to give data with which the shape of the free-jets can be depicted under a specified condition. Experimental data are summarized to enable an estimation of the shape of the supersonic free-jets. The result shows that the shape of free-jets is dependent on only the nozzle pressure ratio.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.23-23
• /
• 2001

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.94-100
• /
• 2007

초음속 제트 마하수 1.07부터 1.2 범위에서 축대칭 제트 스크리치 톤을 해석하였다. 축대칭 모드는 낮은 마하수 축대칭 제트의 지배적인 스크리치 톤 모드이다. 난류 해석을 위해 수정된 Spalart-Allmaras 모델을 RANS (Reynolds-averaged Navier-Stokes) 방정식에 사용하였다. 스크리치 톤 해석에서 중요한 음파의 전파, shock-cell 구조 및 거대한 불안정 파를 정확히 계산하기 위해 비반사 특성 경계조건과 연계한 고차정확도의 ENO 기법을 사용하였다. 수치 해석결과는 다른 연구자들의 실험 및 계산 결과와 잘 일치하였으며, 따라서 본 연구에 사용된 수치 기법들이 초음속 제트 유동 및 소음연구에 타당함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1948-1954
• /
• 2003

The thrust vector control using a fluidic counterflow concept is achieved by applying a vacuum to a slot adjacent to a primary jet which is shrouded by a suction collar. The vacuum produces a secondary reverse flowing stream near the primary jet. The shear layers between the two counterflowing streams mix and entrain mass from the surrounding fluid. The presence of the collar inhibits mass entrainment and the flow near the collar accelerates causing a drop in pressure on the collar. For the vacuum asymmetrically applied to one side of the nozzle, the jet will vector toward the low-pressure region. The present study is performed to investigate the effectiveness of thrust vector control using the fluidic counterflow concept. A computational work is carried out using the two-dimensional, compressible Navier-Stokes equations, with several kinds of turbulence models. The computational results are compared with the previous experimental ones. It is found that the present fluidic counterflow concept is a viable method to vector the thrust of a propulsion system.

• 한국가시화정보학회지
• /
• 제15권1호
• /
• pp.53-63
• /
• 2017

Sonic and supersonic jets include many complicated flow physics associated with shock waves, shear layers, vortices as well as strong interactions among them, and have a variety of engineering applications. Much has been learned from the previous researches on the sonic and supersonic jets but quantitative assessment of these jets is still uneasy due to the high velocity of flow, compressibility effects, and sometimes flow unsteadiness. In the present study, the sonic jets issuing from a convergent nozzle were measured by PIV and Schlieren optical techniques. Particle Image Velocimetry (PIV) with Olive oil particles of $1{\mu}m$ was employed to obtain the velocity field of the jets, and the black-white and color Schlieren images were obtained using Xe ramp. A color filter of Blue-Green-Red has been designed for the color Schlieren and obtained from an Ink jet printer. In experiments, two types of sonic nozzles were used at different operating pressure ratios(NPR). The obtained images clearly showed the major features of the jets such as Mach disk, barrel shock waves, jet boundaries, etc.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.87-90
• /
• 2003

압축성 유동장의 주된 특징은 유동장의 형성과정에 의존한다는 것은 잘 알려져 있다. 본 연구의 목적은 비평형 응축을 수반하는 초음속 제트유동장의 발달에 미치는 제트의 시간이력을 조사하는 것이다. 특히 초음속 습공기 제트에서 마하디스크 직경과 위치의 거동이 노즐압력비와 초기 상대습도의 항으로 소개된다. 대기흡입식 풍동설비에 장착된 노즐의 출구에서 부족팽창된 습공기 제트를 얻기 위해 노즐의 압력비와 초기상대습도를 변화시켰다. 마하디스크의 직경은 동일한 압력비에서 상대습도가 증가함에 따라 증가하지만, 그 위치는 상류로 이동하는 것으로 나타났다. 또한 노즐의 작동압력비가 증가하는 경우의 마하디스크 직경과 발생위치가 감소하는 경우보다 더 크다.