• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.13-22
• /
• 2002

This paper presents characteristics of CrOx thin-film Strain gauge pressure sensors, which were deposited on SUS630 diaphragm by DC reactive magnetron sputtering in an argon-Oxide atmosphere(Ar-(10%)$O_2$). The optimized condition of CrOx thin-film strain gauges were thicknessrange of 2500$\AA$ and annealing condition ($350^{\circ}C$, 3 hr) in Ar-10 %$O_2$deposition atmosphere. Under optimum conditions, the CrOx thin-films for strain gauge is obtained a high resistivity, $\rho$=156.7$\mu$$\Omega$cm, a low temperature coefficiect of resistance, TCR=-86 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal, 15. The output sensitivity of pressure sensor obtained is 2.46㎷/V and the maximum non-linearity is 0.3%FS and hysteresis is less than 0.2%FS. The output characteristics of pressure transmitter obtained is 4~20㎃ and total accuracy is less than $\pm$0.5%FS. In those conclusions, CrOx thin film pressure sensors is quite satisfactory for many applications in industrial electronics.

• Journal of Microbiology
• /
• 제44권3호
• /
• pp.263-268
• /
• 2006

Pleurotus ostreatus is a widely cultivated white-rot fungus. Owing to its considerable enzymatic versatility p. ostreatus has become the focus of increasing attention for its possible utility in biobleaching and bioremediation applications. Interactions between microorganisms can be an important factor in those processes. In this study, we describe the presence of a bacterial species associated with P. ostreatus strain G2. This bacterial species grew slowly (approximately 30 days) in the liquid and semi-solid media tested. When p. ostreatus was inoculated in solid media containing Tween 80 or Tween 20, bacterial microcolonies were detected proximal to the fungal colonies, and the relevant bacterium was identified via the analysis of a partial 16S rDNA sequence; it was determined to belong to the Burkholderia cepacia complex, but was not closely related to other fungus-isolated Burkholderiaceae. New specific primers were designed, and confirmed the presence of in vitro P. ostreatus cultures. This is the first time that a bacterial species belonging to the B. cepacia complex has been found associated with P. ostreatus.

• Coupled systems mechanics
• /
• 제1권3호
• /
• pp.269-283
• /
• 2012

In the present paper, a multilevel approach for the local nanobuckling analysis of carbon nanotube (CNT) based composite materials is proposed and described. The approach comprises four levels, all of them at nanoscale. The first level aims to propose the potential that describes the interatomic forces between carbon atoms. In the second level, molecular dynamics simulations are performed to extract the elastic properties of the CNT. The third level aims to determine the stiffness of the material that surrounds the CNT (matrix), using the annular membrane analysis. In the fourth level, finite strip analysis of the CNT elastically restrained by the matrix is performed to calculate the critical strain at which the CNT buckles locally. In order to achieve accurate results and take the CNT-matrix interaction into account, the $3^{rd}$ and $4^{th}$ steps may be repeated iteratively until convergence is achieved. The proposed multilevel approach is applied to several CNTs embedded in a cylindrical representative volume element and illustrated in detail. It shows that (i) the interaction between the CNT and the matrix should be taken into account and (ii) the buckling at nanoscale is sensitive to several types of local buckling modes.

• International Journal of Railway
• /
• 제6권4호
• /
• pp.160-168
• /
• 2013

A spiral lattice girder-reinforced Bi-block sleeper which has enhanced durability against increasingly growing impact force and vibration by wheel load and improved structural performance while train runs at 350km/h high speed is hereby proposed. The section of a spiral lattice girder has stable and superior structural performance thanks to its confinement effect. To compare and analyze the structural performance of spiral lattice girder-reinforced bi-block sleeper, strain and stress distribution were evaluated after applying same load condition as existing triangular lattice girder-reinforced biblock sleeper, and to compare the structural performance of triangular lattice girder and spiral lattice girder, structural analysis of lattice girder was performed separately. As a result, a spiral lattice girder proved to have had superior structural characteristics to bi-block sleeper, and furthermore as a result of evaluating the fastener interface and constructibility with shape-improved lattice girder, no interference with existing railroad structure was found and in terms of cost efficiency, a spiral lattice girder appeared to be superior to existing lattice girder.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.99-111
• /
• 1999

The object of this study is to get the superior double hull structure to its crashworthiness against collision comparing absorbed energy capacities of its various types with each other, varying material properties, collision positions and velocities, and structural arrangements such as double hull width, web and stringer spaces, etc. Local absorbed energy capacities, failure behaviors and damage extents of their members are also considered during collision in addition to the estimations of their global ones. This paper describes a series of numerical simulations of collisions between DWT 45,000 oil tanker(struck ship) and DWT 10,500 rigid one(striking ships) using Hydrocode LS/DYNA3D. Collisions are assumed to occur at the middle of struck ship with striking one moving at right angle to its centerline. The following remarks were obtained through this study: More flexible the double hull structure is, much superior its crashworthiness against collision is. The increment of double hull width does not give much influence than other factors do. The exact use of material property such as failure strain is also important on the numerical simulation of collision.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.236-239
• /
• 2001

In this study, the compound materials of GRT/plastics (HDPE, LLDPE, LDPE, PP and PS) were developed. Their tensile strength, strain at yield and flexural modulus according to the change in CRT content were measured. And, the physical properties of the compound materials that the GRT content was changed in the waste vinyl HDPE and pure HDPE were measured, compared and analyzed. If tile GRT is added to PE plastics, the physical properties were superior to those of PP and PS, and in the case of HDPE, the waste vinyl HDPE had superior physical properties by the GRT content to the pure HDPE.

• 터널과지하공간
• /
• 제28권3호
• /
• pp.277-291
• /
• 2018

이 논문에서는 재료의 단축하중 하에서의 응력-변형률 곡선을 예측하기 위하여 순환 신경망의 일종인 LSTM(Long Short-Term Memory) 알고리즘을 사용하였다. 석고와 규사를 혼합해 만든 재료에 일축압축시험을 수행하여 얻은 응력-변형률 데이터를 이용하였으며, 낮은 응력 구간의 초반 데이터를 활용해서 파괴 전까지의 거동을 예측하였다. 앞부분의 데이터를 활용하여 단계적으로 뒤쪽 구간의 값을 예측하는 LSTM 순환 신경망의 구조상 큰 응력에 대응하는 변형률을 예측할 경우에는 앞쪽 구간의 오차가 누적되어 실측값과 차이가 늘어났으나 전반적으로 높은 정확도로 응력-변형률 곡선을 예측하였다. 예측에 사용한 초기 데이터의 길이가 늘어나는 경우 정확도는 조금 증가했다. 그러나 접선을 이용한 단순 예측과의 성능 차이는 초기 데이터의 길이가 작은 경우에 두드러졌으며, 적은양의 데이터로도 응력-변형률 곡선 전체 구간의 예측을 가능하게 한다는 점으로부터 신경망 모델의 필요성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.478-480
• /
• 2001

Fe-base amorphous films exhibit large saturation magnetostriction and soft magnetic Properties, which make them suitable for strain sensor applications. Most important material properties for the performance of these elements are the superior soft magnetic properties, such as high permeability and small coercive force, as well as magnetoelastic properties. It is well known that the strain generated in film deposition and/or post-heat treatment processes is one of important material properties, which effects on the soft magnetic properties of the film via magnetoelastic coupling. In this study, the effect of an isotropic strain in plane of magnetic films have been performed experimently. Amorphous films with the composition of (F $e_{90}$ $Co_{10}$)$_{78}$S $i_{l2}$ $B_{10}$ were employed in this study. The film with 5${\mu}{\textrm}{m}$ thick was deposed onto the polyimide substrate with 50${\mu}{\textrm}{m}$ thick by virtue of RF sputtering. The film was subject to post annealing with a static magnetic field with 500Oe magnetic field intensity at 35$0^{\circ}C$ for 1 hour. The polyimide substrate with the film was bonded with an adhesive on PZT piezoelectric substrate with 600${\mu}{\textrm}{m}$ thick in applying voltage of 500V. The change in MH loops of films due to the isotropic strain was measured by using VSM. The coercive force was evaluated from MH loops. It has shown in the results that M-H loops of films are subject to change considerably with a dc voltage, resulting of the magnetization rotation from normal to plane direction as the applied voltage is changed from 500V to 250V.50V.V.

• 한국가금학회지
• /
• 제7권1호
• /
• pp.31-42
• /
• 1980

브로일러 산육능력 개량을 위한 우량 교배조합을 선발할 목적으로 결합능력추정과 부계통 모계통의 선발 지침을 분석하기 위하여 본 시험은 1978년 9월28일부터 1979년 1월 5일까지 약 14주간 부계통 4계종과 모계통 3계종으로부터 작출된 브로일러 1,440수를 가지고 한협종계장에서 실시되었으며 그 결과를 요약하면 다음과 같다. 1. 브러일러의 생존율에서 잡종강세의 효과는 나타나지 않았고 생존율의 개량을 위해서는 Hubbard를 부계통으로 선발하는 것이 바람직 한 것으로 사료되었다. 2. 8주령시 체중에서 부, 모계통 모두 Ross의 이용이 바람직스럽고 특수결합능력을 이용한 우량교배조합으로는 Hubbard$\times$Ross와 Ross$\times$Hypeco의 교배조합으로 인정할 수 있었다. 3. 8주동안 사료섭취량은 부계통에서 유의적으로 우수했던 Hubbard와 Ross, 그리고 모계통에서는 체중증가에 비례해서 사료섭취량이 증가되는 분포이지만 8주시 체중과 비교하여 Hypeco의 선발이 유효함을 알 수 있었으며 특히 Hubbard$\times$Hypeco의 교배조합은 사료섭취량개량에 우량교배조합으로 인정되었다. 4. 사료요구율에서는 부계통으로는 Hubbard, 모계통으로는 Hypeco의 선발이 우수한 것으로 인정되었고 Hubbard$\times$Hypeco, Hubbard$\times$Ross 그리고 Ross$\times$Hypeco의 교배조합이 우량한 것으로 판단되었다. 5. 경제성 분석에서는 8주 체중과 사료효율이 우수했던 Hubbard$\times$Hypeco, Hubbard$\times$Ross 교잡구가 가장 많은 수익을 나타내었다. 이상과 같은 결과로 볼 때 부계통 선발은 Ross와 Hubbbard, 모계통에서 Hypeco와 Ross를 통한 교배조합형성에서 Hubbard$\times$Ross, Hubbard$\times$Hypeco 그리고 Ross$\times$Hypeco등의 우량교배조합으로 브로일러 경제형질인 생존율, 체중, 사료섭취량, 사료요구량의 개량이 이룩될 수 있는 것으로 판단된다.

• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.67-81
• /
• 2006

Using a strain-controlled rheometer, the dynamic viscoelastic properties of aqueous xanthan gum solutions with different concentrations were measured over a wide range of strain amplitudes and then the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a broad range of angular frequencies. In this article, both the strain amplitude and concentration dependencies of dynamic viscoelastic behavior were reported at full length from the experimental data obtained from strain-sweep tests. In addition, the linear viscoelastic behavior was explained in detail and the effects of angular frequency and concentration on this behavior were discussed using the well-known power-law type equations. Finally, a fractional derivative model originally developed by Ma and Barbosa-Canovas (1996) was employed to make a quantitative description of a linear viscoelastic behavior and then the applicability of this model was examined with a brief comment on its limitations. Main findings obtained from this study can be summarized as follows: (1) At strain amplitude range larger than 10%, the storage modulus shows a nonlinear strain-thinning behavior, indicating a decrease in storage modulus as an increase in strain amplitude. (2) At strain amplitude range larger than 80%, the loss modulus exhibits an exceptional nonlinear strain-overshoot behavior, indicating that the loss modulus is first increased up to a certain strain amplitude(${\gamma}_0{\approx}150%$) beyond which followed by a decrease in loss modulus with an increase in strain amplitude. (3) At sufficiently large strain amplitude range (${\gamma}_0>200%$), a viscous behavior becomes superior to an elastic behavior. (4) An ability to flow without fracture at large strain amplitudes is one of the most important differences between typical strong gel systems and concentrated xanthan gum solutions. (5) The linear viscoelastic behavior of concentrated xanthan gum solutions is dominated by an elastic nature rather than a viscous nature and a gel-like structure is present in these systems. (6) As the polymer concentration is increased, xanthan gum solutions become more elastic and can be characterized by a slower relaxation mechanism. (7) Concentrated xanthan gum solutions do not form a chemically cross-linked stable (strong) gel but exhibit a weak gel-like behavior. (8) A fractional derivative model may be an attractive means for predicting a linear viscoelastic behavior of concentrated xanthan gum solutions but classified as a semi-empirical relationship because there exists no real physical meaning for the model parameters.