• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.321-330
• /
• 1995

Homogeneous and monolithic TiO2-SiO2 binary aerogels were prepared by supercritical drying. Optical transparency was increased with adding acid catalyst during two step hydrolysis and with decreasing water content. These differences in optical transparency were related to microstructures of gel network formed through polycondensation reaction during supercritical drying process, rather than the final composition of aerogel.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.471-475
• /
• 1988

Pressure and flowrate control systems for a supercritical extraction process are designed and analyzed. To do this, the dynamic model was first set up using the performance equations of control valves, CO2 compressor and the state equation of the supercritical fluid. Using this model, optimum pairs of manipulated and controlled variable which give least steady stat interaction are determined though the relative gain analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.238-241
• /
• 1997

The recent trend toward increased use of the once-through supercritical boiler worldwide is mainly due to its rapid response. The transient behavior of the steam generator are essential in the study of the system performance of power plants as well as for the design of their appropriate control systems. In this paper, a mathmatical model of the once-through supercritical pressure boiler is obtained by simulating a set of nonlinear differential and algebraic equations.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.171-174
• /
• 2001

초임계유체(supercritical fluid, SCF)는 친환경적 용매로서 고분자 합성과 기능화를 비롯하여 RESS(rapid expansion of supercritical solution)와 초임계염색 등의 섬유공정 분야에서 연구자들의 흥미로운 관심을 받아 오고 있다. 초임계유체는 기체와 액체의 중간적인 특성을 가지면서도 가스와 같이 우수한 확산력을 가지며 또한 아주 낮은 점도를 갖는다. SCF 중에서 비교적 온화한 조건(31.1℃의 임계온도, 73.8기압의 임계압력, Figure 1)에서 초임계상태를 가질 수 있는 이산화탄소가 가장 많이 이용되고 있는데 이는 자원이 풍부하며 쉽게 회수하여 사용할 수 있어 응용 면에서 유리하다. (중략)

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1351-1355
• /
• 1998

A simple apparatus for adding a modifying solvent to supercritical CO2 extractant was described. Small, fixed volumes (typically 100 μL) of liquid modifying solvents were delivered during the extraction process by use of an in-line high pressure loop injector and an air pump. Without disconnecting the extraction cell from the supercritical fluid extraction system, the modifying solvent was repeatedly delivered. The solvent modification device was optimized during the extraction of carbaryl and bis(acetylacetonato) copper(Ⅱ). Extraction recoveries from spiked filter paper and soil samples ranged between 22% and 109%, depending on the analyte and matrix components. The addition of polar modifying solvents were necessary to improve the extractability of the nonpolar CO2.

• 한국연초학회지
• /
• 제18권1호
• /
• pp.92-99
• /
• 1996

A mathematical model of the pressure gradient of supercritical CO2 in a vertical tobacco bed was developed in this study. In particular, the compaction of the tobacco as a function of temperature and CO2 flow is included in the model. Downflow of CO2 (low condition is described. At velocities in excess of 0.6 cm/sec at 7$0^{\circ}C$, there is a large increase in pressure gradient for beds deeper than about 0.5 m. The proposed model offers a better understanding of operating the process using supercritical CO2.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1429-1432
• /
• 2006

Polyaromatic hydrocarbons were separated by a capillary supercritical fluid chromatographic (SFC) column and detected by a UV detector at the wavelength of 280 $\mu$m. The temperature-controlled restrictor was designed for UV detection. The temperature-controlled restrictor is a 20 cm length of deactivated fused silica of 7 mm i.d. which is held right after UV detector of the capillary SFC. The temperature of the restrictor will control the flow rate of the supercritical carbon dioxide mobile phase through the capillary column in SFC. Thus as the pressure in the column is increased from 1500 psi to 4000 psi during a pressure program, the temperature of 7 $\mu$m fused-silica tube can be varied from 100 to 350 ${^{\circ}C}$ to maintain a constant flow rate.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.471-475
• /
• 2004

The solubility of N,N'-Bis(salicylidene) ethylenediamine (n-salen) and N,N'-bis(3,5-di-tert-butylsalicylidene) ethylenediamine (t-butyl-salen) was studied with in-situ UV-VIS spectrometer. n-Salen is 3-5 times more soluble than t-butyl-salen in liquid or supercritical $CO_2$. This behavior may be attributed to Lewis acid-base interaction between salen and $CO_2$. The chelation of salen with $Co^{++}$ ion in supercritical condition was confirmed to be fast enough above room temperature. However, the metal ion extraction capability of t-butyl salen is relatively poor because of its low solubility and ionic nature of complex.

• KSBB Journal
• /
• 제15권4호
• /
• pp.408-410
• /
• 2000

생리활성물질의 함유량이 많은 아가리쿠스버섯으로부터 초임계 유체 추출 기술을 이용하여 비극성 생리활성물질인 linoleic acid를 분리, 정제하였다. Gas chromatography - mass spectrometer를 이용하여 추출된 물질의 정성분석을 수행하여 추출된 물질은 약리작용 효과를 가지는 linoleic acid (cis-9, cis-12-octadecadienoic acid)로 분석되었다. 초임계 추출법을 이용한 아가리쿠스 버섯으로부터의 생리활성물질 추출공정의 최적화를 위하여 다양한 온도와 압력하에서 실힘을 수행하였으며 추출 효율을 비교한 결과 $50^{\circ}C, 200 kg_f/cm^2$의 최적 운전조건을 결정하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1434-1441
• /
• 2001

A computational study has been performed to determine the effects of divergent trailing edge (DTE) modification to a supercritical airfoil in transonic flow field. For this, the computational result with the original DLBA 186 supercritical airfoil was compared to that of the modified DLBA 283. A wavier-Stokes code, Fluent 5. 1, was used with Spalart-Allmaras's one-equation turbulence model. Results in this study showed that the reduction in drag due to the DTE modification is associated with weakened shock and delayed shock appearance. The decrease in drag due to the DTE modification is greater than the increase in base drag. The effect of the recirculating flow region on lift increase was also observed. An airfoil with DTE modification achieved the same lift coefficient at a lower angle of attack while giving a lower drag coefficient. Thus, the lift-to-drag ratio increases in transonic flow conditions compared to the original airfoil. The lift coefficient increases considerably whereas the lift slope increases just a little due to DTE modification.