• 한국식품저장유통학회지
• /
• 제14권5호
• /
• pp.469-473
• /
• 2007

비동결 파운드 케이크의 배합비를 반응표면분석법에 의해 여러 가지 동결방지제의 함량을 조절하여 결정하였다. 수분함량만이 동결방지제 함량과 선형관계를 나타내었으나, 다른 반응변수들은 quadratic모형으로 나타났다. 비동결 파운드 케이크에 제조시 함유되는 당류의 최적 배합비는 7736 : 0.0 : 20.4, 60.0 : 32.8 : 16.4, 70.8 : 11.2 : 19.6와 같이 3가지로 제시되었다. 최적배합비로 제조한 파운드 케이크의 냉동 시간은 기준 배합비로 만든 케이크보다 $45{\sim}27%$가 단축되었으며, 동결점은 $-20^{\circ}C$이하에서 나타났다. 동결방지제의 적절한 배합율을 적용하면 빙점강하에 의해 가공식품 냉동에 필요한 냉동 에너지 감소 효과를 얻으며 기존제품과 유사한 품질 특성을 구할 수 있음을 알았다.

• 대한화학회지
• /
• 제36권3호
• /
• pp.360-365
• /
• 1992

고체 시료의 상전이 현상을 연구하기 위하여 온도 가변용 광음향 cell과 dewar를 제작하였고, 이 장치를 이용하여 wood's metal의 상전이 온도를 측정하였다. 실험 결과는 융점으로 알려진 343 K와 잘 일치하고, 잠열(latent heat)이 존재하는 1차 상전이임을 나타냈으며 supercooling 현상이 존재한다는 것을 알았다. 고체-액체 상전이와 같은 1차 상전이의 경우 잠열이 존재하며 이러한 잠열은 시료의 온도를 올리며 측정할 경우 상전이 온도 부근에서 광음향 신호의 급작스런 감소를 발생시킨다. 그러나 온도를 내릴 경우 광음향 신호에는 아무런 영향을 미치지 못하므로 광음향 측정은 상전이의 차수를 결정할 수도 있음을 물론, 고체의 상전이 현상 연구에 유용한 방법임을 입증하였다.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.367-371
• /
• 2006

Thermal properties of copolyetherester/silica nanocomposites were examined by using DSC and TGA. The segmented block copolyetheresters with various hard segment structures and hard segment contents (HSC) were synthesized and their silica nanocomposite films were prepared by solution casting method. The nano-sized fumed silica particles were found to act as a nucleating agent of the copolyetheresters. The nanocomposites always showed reduced degree of supercooling or faster crystallization than the corresponding copolyetheresters. The nanocomposites also showed increased hard segment crystallinity except HSC 35 sample which had short hard segment length. In case of 2GT [poly(ethylene terephthalate)] copolyetheresters, which were not developed commercially because of their low crystallization rate, the hard segment crystallinity increased considerably. The copolyetherester/silica nanocomposites showed better thermal stability than copolyetheresters.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.451-462
• /
• 1996

In this study, which focuses on ice storage, a fundamental study in cooling and solidification was performed, including the interesting phenomena of density inversion, supercooling and dendritic ice. A numerical study was performed for natural convection and ice formation considering existence of subcooling and dendritic ice were analyzed numerically by using finite difference method and boundary fixing method. In the mesh, the solid fraction was introduced with adding as a term to the energy conservation equation. A flow in the dendrite was modelled as a flow in a porous medium, and the momentum conservation equation was modified to incorporate resistance forces involved in flows through porous media. A numerical solution of the time dependencies of dendrite area and dense ice front was successfully obtained, and the numerical results were good agreement with experimental results. Based on this methodology, a discussion was made of phenomena and characteristics of cooling and freezing processes under various conditions.

• Journal of Plant Biology
• /
• 제26권1호
• /
• pp.33-39
• /
• 1983

Twigs bearing floral buds of Rhododendron yedoense var. poukhanense(Ryp) and R. sinmsii(Rs), hardy species in Korea, were used to investigate the cold hardiness in relation to the developmental and anatomical characteristics, and the changes of water content. In floral buds of both species, the reproductive organs, pistils and stamens, matured within the bud scales in early ctober to prepare for a cold acclimation. The ray parenchymatous areas occupied in xylem were 41% in Ryp and 38% Rs. As the storage temperature is raised from 2 to 17$^{\circ}C$, water content increased more highly in Rs than in Ryp. Exotherm temperature of floral bud in Ryp was generally lower than that in Rs. The result supports that the higher cold-hardiness is achieved owing to the earlier maturation of floral buds, to the larger area of ray parenchyma in xylem, and to the lesser increase of water content as the storage temperature is raised.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1071-1077
• /
• 2002

Ice adhesion on cooling wall is very important in continuous ice formation. The purpose of the present study is to investigate the possibilities of a three-component aqueous solution as a thermal storage material for the continuous ice formation. By freezing under stirring the solution of 300 mL in a stainless steel vessel which was immersed and cooled in a temperature controlled bath, an ice slurry was formed experimentally with measuring the temperature and stirring load variation. From the experiment, the ice adhesion was suppressed when the supercooling degree decreased and the concentration of aqueous solution increased.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1063-1070
• /
• 2002

To resist ice adhesion on cooling wall is concerned to continuous ice formation in thermal storage system. In this study, ice slurries were formed with two ecological aqueous solution, one is ethanol+silanol and the other is propylene glycol+silanol. By freezing under stirring the solution of $300m\ell$ in a stainless steel vessel which was immersed and cooled in a temperature controlled bath, the shape of ice slurry and the strength of ice adhesion on wall was observed with measuring the temperature and stirring load variation. As the concentration is smaller and the supercooling degree is larger, the ice adhesion is easy to occur. When the stirring load is larger than$ 2.1\times10^{-5}W$, the ice adhesion occurred.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.588-590
• /
• 2008

The thermal signature of nucleation process is characterized by the induction time, the degree of supercooling, and the equilibrium temperature depression. The initiation of nucleation presents stochastic characteristics. The factors that affect nucleation are mechanical impact, ionic concentration, mineral surface characters, and pore size. Hydrate-bearing sediments behave mechanically like other cemented sediments. The data set has important implications for the calibration and interpretation of geophysical measurements and downhole logs collected in gas hydrate provinces, providing particular insight for the interpretation of P- and S-wave data and resistivity logs. In addition, laboratory formation history and ensuing pore-scale spatial distribution likely have a more pronounced effect on the macroscale mechanical properties of hydrate-bearing sediments

• 한국분말재료학회지
• /
• 제6권3호
• /
• pp.231-237
• /
• 1999

In this study, the characteristics of gas atomized Mg-3wt%Al-1wt%Zn-1wt%MM alloy powders under vacuum condition were investigated. In spite of the low fluidity and easy oxidation of the molten magnesium, the spherical powders could be successfully produced by using a modified three pieces nozzle attached to the gas atomization unit. It was found that most of the solidified powders less than 50$\mu$m in diameter were single crystal and the solidified structure showed a typical dendritic morphology due to supercooling prior to nucleation. The secondary dendrite arm spacing decreased as the size of powders decreased. The Mg-Al-Ce intermetallic compounds with chemically stable phase were found in the interdendritic regions of $\alpha$-Mg. It is considered that formation of the chemically stable phase may possibly affect to improve the corrosion resistance. Therefore, it is expected that the materials formed of these Mg-Al-Zn-MM alloy powders shows better mechanical properties and corrosion resistance due to the structural refinement.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.533-538
• /
• 2009

The present study has been conducted to an analysis of two stage refrigeration cycle with alternative refrigerant R410A. In the analysis, single stage cycle (R22 and R410A) compared to COP changing with supercooling degree. Secondly, two stage refrigeration cycle is investigated to the existence of intercooler or supercooler. At results, supercooler contributes to the increase of cooling capacity and the decrease of COP.