• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.41-44
• /
• 2015

Critical current of high-temperature superconducting (HTS) coil is influenced by its own self magnetic field. Direction and density distribution of the magnetic field around the coil are fixed after the shape of the coil is decided. If the entire part of the HTS tape has homogeneous $I_c$ distribution characteristic, quench would be initiated in fixed location on the coil. However, the actual HTS tape has inhomogeneous $I_c$ distribution along the length. If the $I_c$ distribution of the HTS tape is known, we can expect the spot within the HTS coil that has the highest probability to initiate the quench. In this paper, $I_c$ distribution within the HTS coil under self-field effect is simulated by MATLAB. In the simulation procedure, $I_c$ distribution of the entire part of the HTS tape is assume d to follow Gaussian-distribution by central limit theorem. The HTS coil model is divided into several segments, and the critical current of each segment is calculated based on the-generalized Kim model. Single pancake model is simulated and self-field of HTS coil is calculated by Biot-Savart's law. As a result of simulation, quench-initiating spot in the actual HTS coil can be predicted statistically. And that statistical analysis can help detect or protect the quench of the HTS coil.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.530-538
• /
• 2003

110 K 상의 산화물 고온초전도체를 B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$의 출발조성비로 고상반응법에 의해 합성하였다. 합성된 Bi계 110 K 상의 산화물 고온초전도 물질을 다시 분말 상태로 만든 후, MgO 금속산화물 분말을 5~50 wt%의 각 비율로 혼합하였다. MgO 금속산화물 분말이 혼합된 시편들을 820~86$0^{\circ}C$로 24시간동안 최종 소결시켰다. 그 후, 각 시편들에 대하여 x-선, $T_{c}$, SEM 등을 측정하여 MgO 금속산화물 혼합량에 대한 초전도특성 및 표면의 입자 크기 변화 등에 대한 조사를 진행하였다. MgO 금속산화물의 혼합량이 증가됨에 따라 MgO 관련 피크들의 강도 및 2212 상들의 피크들의 비율은 증가되었고, 시편 내 2223 상의 비율은 감소하고 2212상의 비율은 증가되었다.다.은 증가되었다.다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.22-27
• /
• 1993

we prepared 70K new BiPbAgSrCaCuO superconductor used diffusion of dual layer which composed of SrCaCuO and BiPbAgCuO compound. This method is used permeation and diffusion on partial melting point of BiPbAgCuO compound. Samples were analyzed by means of X-ray diffraction analysis, Thermal analysis, critical temperature and scanning electron microscopy. It was found that the best results were obtained for spread volume (A:B=1:0.6) and sintring time 210hours.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.129-132
• /
• 2005

The formation behavior of $YBa_2Cu_3O_{7-x}$(Y123) and CuO phases in the heat-treated Cu-sheathed YBCO thick films was studied. The thick films were prepared by screen-printing method using $BaCO_3$ and Y211 powders on Cu tapes. The screen-printed thick films were placed at the center of the tube furnace, heated to $930^{\circ}C$ in air atmosphere and then maintained at the temperature for 60 sec - 300 sec. The microstructure and phases formed in the thick films were investigated by using optical microscope, X-ray diffraction (XRD) and SEM image analysis. During the heat treatment, partial melting occurred rapidly in the printed layers by peritectic reaction between CuO and precursor powders, and then YBCO superconducting phases nucleated from the Cu tapes and grew in a form of thick films.

• 전자공학회논문지D
• /
• 제36D권12호
• /
• pp.11-20
• /
• 1999

직접 결합과 사이 결합을 이용하여 신호를 인가하는 두 가지 경우의 마이크로스트립 헤어핀 콤 여파기를 직경 50 mm, 두께 0.5 mm인 하나의 $LaAlO_3$ 기판 위에 양면 증착한 YBCO 박막을 이용하여 설계 제작하였다. 두 가지 헤어핀 콤 여파기 모두 중심 주파수가 1.773 GHz 이였고, 대역폭이 12 MHz 이었으며, 통과 대역에서 최소 삽입 손실이 0.5 dB 이었고, 저지 대역에서는 매우 강한 반사 손실 특성을 지니고 있었다. 직접 결합 헤어핀 콤 여파기는 통과 대역 아래쪽과 위쪽에 감쇠 폴이 생겼으나, 사이 결합 헤어핀 콤 여파기는 통과 대역 아래쪽에서만 감쇠 폴이 존재하였다. 따라서 직접 결합 헤어핀 콤 여파기가 사이 결합 헤어핀 콤 여파기에 비해서 더 좋은 스커트 특성을 보여주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권4호
• /
• pp.27-31
• /
• 2004

This paper describes the development and fabrication of a high temperature superconducting motor which consists of HTS rotor and air-core stator. The machine was designed for the rated power of 100hp at 1800 rpm. The HTS field windings are composed of the double-pancake coils wound with AMSC's SUS-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. Characteristic parameters such as reactances, inductances, and time constants were determined to obtain a consistent overview of the machine operation properties. This motor has met all design parameters by demonstrating HTS field winding, cryogenic refrigeration systems and an air-core armature winding cooled with air. The HTS field winding could be cooled down below 30K. No-load test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction, and basic experimental test results of the 100hp HTS machine.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.59-63
• /
• 2016

The superconducting NMR magnets have used cryogen such as liquid helium for their cooling. The conduction cooling method using cryocoolers, however, makes the cryogenic cooling system for NMR magnets more compact and user-friendly than the cryogen cooling method. This paper describes the thermal and structural analysis of a cryogenic conduction cooling system for a 400 MHz HTS NMR magnet, focusing on the magnet assembly. The highly thermo-conductive cooling plates between HTS double pancake coils are used to transfer the heat generated in coils, namely Joule heating at lap splice joints, to thermal link blocks and finally the cryocooler. The conduction cooling structure of the HTS magnet assembly preliminarily designed is verified by thermal and structural analysis. The orthotropic thermal properties of the HTS coil, thermal contact resistance and radiation heat load are considered in the thermal analysis. The thermal analysis confirms the uniform temperature distribution for the present thermal design of the NMR magnet within 0.2 K. The mechanical stress and the displacement by the electromagnetic force and the thermal contraction are checked to verify structural stability. The structural analysis indicates that the mechanical stress on each component of the magnet is less than its material yield strength and the displacement is acceptable in comparison with the magnet dimension.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권4호
• /
• pp.53-58
• /
• 2013

KSTAR in-vessel cryo-pump has been installed in the vacuum vessel top and bottom side with up-down symmetry for the better plasma density control in the D-shape H-mode. The cryogenic helium lines of the in-vessel cryo-pump are located at the vertical positions from the vacuum vessel torus center 2,000 mm. The inductive electrical potential has been optimized to reduce risk of electrical breakdown during plasma disruption. In-vessel cryo-pump consists of three parts of coaxial circular shape components; cryo-panel, thermal shield and particle shield. The cryo-panel is cooled down to below 4.5 K. The cryo-panel and thermal shields were made by Inconel 625 tube for higher mechanical strength. The thermal shields and their cooling tubes were annealed in air environment to improve the thermal radiation emissivity on the surface. Surface of cryo-panel was electro-polished to minimize the thermal radiation heat load. The in-vessel cryo-pump was pre-assembled on a test bed in 180 degree segment base. The leak test was carried out after the thermal shock between room temperature to $LN_2$ one before installing them into vacuum vessel. Two segments were welded together in the vacuum vessel and final leak test was performed after the thermal shock. Commissioning of the in-vessel cryo-pump was carried out using a temporary liquid helium supply system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1120-1121
• /
• 2015

대용량 SMES(Superconducting Magnetic Energy Storage)를 제작하기 위해서는 높은 자장특성을 가고 있는 2세대 HTS(High-Temperature Superconductor) 선재를 사용하는 것이 효율적이다. SMES의 에너지밀도를 높이기 위해서는 선재에 많은 전류를 흘려야 하는데, 수직자기장이 커지면 임계전류가 작아지는 2세대 HTS 선재의 특성상 토로이드형태의 SMES가 유리하다. SMES를 설계하기 전에 선재의 사용량을 줄이고 체적을 줄이기 위해서 정확한 설계와 평가가 필요하다. 유한요소법을 사용한 상용프로그램을 이용하여 쉽게 해석할 수 있으나 토로이드 형태의 SMES는 대칭성의 문제로 3차원 해석을 해야만 한다. 그러나 2차원 해석에 비해 여러 가지 제약조건이 따르며 해석 시간이 많이 소요된다. 본 논문에서는 이러한 문제점을 해결하기 위해 분석적이고 통계적으로 고온 초전도 코일에서 작용하는 최대 수직자장을 결정하는데 이해하기 쉽고 효율적으로 계산하는 방법을 제시했다. 본 논문에서는 싱글펜케이크코일의 크기에 따른 최대 자장값을 계산하였고 싱글펜케이크코일이 토로이드형태로 배치된 토로이드 모델에서 주변코일이 싱글펜케이크코일의 미드포인트에 미치는 자장값을 계산하여 두 계산값을 합하는 방식으로 최대 자기장을 계산하였다. 이 방법은 현저한 시간단축과 효율적인 설계를 할 수 있는 새로운 계산 방법으로 기존 FEM을 사용해 걸리는 시간에 비해 1/1000정도의 시간단축을 할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.