• KIEAE Journal
• /
• v.2 no.2
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.70-76
• /
• 2014

The intensity of sunlight becomes lower when weather conditions change, which affects whether a solar-electric vehicle can be driven on a shady road. The power delivered by solar cells can be vary depending on the amount of shade. As a result, the battery system is often used to compensate for variations in the power delivered by solar cells. Therefore, studies of power control systems for solar-electric vehicles are required. In this paper, mathematical models for such a power control system are studied and important variables are considered. Simulation and test results show that the mathematical model and actual designs developed here would be effective when used with solar-electric vehicles.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.64-69
• /
• 2009

This paper aims at enhancing the electric production efficiency of photovoltaic(PV) system. The electrical power of PV system is proportional to light intensity on a PV module surface. In this paper, we apply two types of systems to enhance power generation efficiency. First, of all, concentring sunlight using specular surface and one-axis tracking system which traces the sun with vertical direction are applied in this project. From this, we analyze the fixed type method and power generation efficiency.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.463-474
• /
• 2012

The purpose of this research was to find the suitable dyeing method for dyeing cotton fabric into indigo blue color using the raw indigo powder dyes sold in the Korean market. The research focused primarily on the comparison of the non-reduced dyeing method and the reduced dyeing method. The dyeing effects using different dyeing temperatures ($2{\sim}80^{\circ}C$) and different concentrations of reducing agent and alkali were also investigated. It was found that the reduced dyeing method must be used for dyeing cotton into indigo blue color using the commercial raw indigo powder dyes. The best result was obtained by $20^{\circ}C$ dyeing with the $40^{\circ}C$ dyeing giving a comparable result. The intensity of the blue color could be enhanced by increasing the alkali concentration. The non-reduced dyeing could not dye cotton fabric into indigo blue color at any given dyeing temperatures ($2{\sim}80^{\circ}C$). The reduce-dyed cotton fabrics showed a gradual color change upon repeated washing and extended sunlight exposure, the most color change occurring after the first two washing cycles and the first 5 hours of sunlight exposure. The standard tests of colorfastness showed that the reduce-dyed cotton fabrics had good to excellent colorfastness whereas the colorfastness of the non-reduce-dyed cotton fabrics were mostly poor.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.5
• /
• pp.320-330
• /
• 2012

This study was conducted to investigate the changes of chlorophyll contents, chlorophyll fluorescence, photosynthetic parameters, and leaf growth of Synurus deltoides under different shading treatments. S. deltoides was grown under non-treated (full sunlight) and three different shading conditions (Shaded 88~93%, 65~75%, and 45%~55%). Light compensation point ($L_{comp}$), dark respiration ($D_{resp}$), maximum photosynthesis rate ($Pn_{max}$), photo respiration rate ($P_{resp}$), carboxylation efficiency ($\Phi_{carb}$), and photochemical efficiency were decreased with increasing shading level; However, $CO_2$ compensation point ($CO_{2\;comp}$), total chlorophyll content, and specific leaf area (SLA) were shown the opposite trend. S. deltoides under 88~93% treatment showed the lowest photosynthetic activity such as maximum photosynthetic rate ($Pn_{max}$), photochemical efficiency, and $CO_2$ compensation point ($CO_{2\;comp}$). Therefore, photosynthetic activity will be sharply decreased with a long period of 8~12% of full sunlight. With the shading level decreased, carotenoid content and non-photochemical fluorescence quenching (NPQ) increased to prevent excessive light damage. This result suggested that growth and physiology of S. deltoides adapted to high light intensity through regulating its internal mechanism.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.2
• /
• pp.161-167
• /
• 2015

This study was carried out to determine the effects of light controls and leaf mold on root growth and physiological responses of Atractylodes japonica growing in forest farming. The experiment was performed by light controls (100%, 62.5%, 40.3% and 19.7% of full sunlight) and application of leaf mold to soil. Height, stem diameter, number of flower buds and root collar diameter were the highest in leaf mold within 62.5% of full sunlight (relative light intensity 62.5%). And these were the higher in leaf mold within each light level. As the shading level increased, light saturation point and maximum photosynthesis rate decreased. As the light level decreased, SPAD value increased in control and leaf mold. As a result of surveying the whole experiment, A. japonica was judged worse root growth under the lower light level. It was concluded that the light level was one of the most important factors to produce A. japonica. Also, producing high-quality of A. japonica with the price competitiveness by using leaf mold like the experiment can be an effective way to increase incomes for farmers.

• Asian Journal of Turfgrass Science
• /
• v.7 no.1
• /
• pp.19-30
• /
• 1993

Experiments were conducted to investigate propagation, shade tolerance, cold resistance and growth rate of evergreen ground cover plants ; Vinca minor K , Ajuga reptans L., Ophiopogon japonicus ker. f nanus hort , and Hedera helix.. The results were as follows : 1.It is convenient to use the growing case for rice seed to grow and transplant Vinca minor seed-ling. The most proper density of transplanting Vinea was 180 plants per 1m$^2$. At the end of growing season, the coverage came up to 90% The rooting ability of Hedera helix was best to cut from April to May (temperature 15~23˚C). The seedling length of Parthenocissus quinguefohlia were irregular and ranged from 5 cm of 200cm. 2. Ajuga reptans L., Ophiopogon j. and Vinca minor L. grew better under 50% light intensity than full sunlight. Particularly, under full sunlight and aestival high temperature, there were a few withering plants in Ajuga reptans L. , and V Vilica minor L. 3. Of Vinca minor K., Ajuga reptans L. , Ophiopogon japonicus ker. f. nanus hort. and Hedera helix. acclimatized in open field, where temperature was from -7~8˚C. There were few plants had damage in low temperature incubator to -16˚C after field acclimatization. 4.Tendrils of Parthenocissus quinguefolia strongly clung to the wire netting stone fence but intruded into the gap and cranny of the precast concrete fence and so clung to, so that it needed to install the bending net on the precast concrete fence.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.259-267
• /
• 2020

We evaluate the degradation of receiver sensitivity induced by direct and indirect exposure to solar irradiance in free-space optical communication systems. For this purpose, we calculate the variances of numerous noise components arising from solar irradiance, and then estimate the receiver sensitivity penalties for intensity-modulation/direct-detection and coherent systems. The results show that the penalties are less than 1.3 dB when indirect sunlight impinges on the detector, regardless of the system. However, the sensitivity penalties are estimated to be larger than 30 dB when the sunlight is directly incident upon the receiver. These penalties are barely reduced if we insert an optical polarizer, or if we adjust the bandwidth of an optical filter at the receiver to be as narrow as the signal's bandwidth.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.584-589
• /
• 2014

Jeffersonia dubia is a spring-flowering perennial found in rich forests in Korea and Northern China and has potential as an ornamental or medicinal plant. However, illegal picking and land use change have decreased the number of populations and overall population size of this plant in its natural habitat. Although J. dubia has been reported to be a shade-preferring plant, no study has determined the optimum light intensity for its growth. The objectives of this work were to observe the effects of various shading levels on the physiological responses of J. dubia and to determine the proper shading level for cultivation. Treatments consisted of four shading levels (0%, 50%, 75%, and 95% shade) imposed using black mesh cloth. The number of leaves and dry weight increased with decreased shading. The shoot-to-root ratio increased with increased shading, mainly due to decreased root dry weight under shading. Plants showed low net $CO_2$ assimilation rates and $F_v/F_m$ values combined with low dry matter levels when grown under 0% shade (full sunlight). These results indicate that J. dubia plants experience excessive irradiance without shading, resulting in damage to the photosynthetic apparatus. By contrast, the net photosynthesis rate increased as the shading level increased. $F_v/F_m$, the potential efficiency of PSII, was 0.8 under 95% shade, indicating that J. dubia is well-adapted under heavy shading. However, the low dry matter of plants in the 95% shade treatment indicated that the low light intensity under 95% shade led to a decline in plant growth. Thus, moderate light (50% shading) is recommended for cultivating J. dubia without physiological defects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.194-210
• /
• 2023

LiDAR plays a key role in autonomous vehicles, where it is used to detect the environment in place of the driver's eyes, and its role is expanding. In recent years, there has been a growing need to test the performance of LiDARs installed in autonomous vehicles. Many LiDAR performance tests have been conducted in simulated and indoor(lab) environments, but the number of tests in outdoor(field) and real-world road environments has been minimal. In this study, we compared LiDAR performance under the same conditions lab and field to determine the relationship between lab and field tests and to establish the characteristics and roles of each test environment. The experimental results showed that LiDAR detection performance varies depending on the lighting environment (direct sunlight, led) and the detected object. In particular, the effect of decreasing intensity due to increasing distance and rainfall is greater outdoors, suggesting that both lab and field experiments are necessary when testing LiDAR detection performance on objects. The results of this study are expected to be useful for organizations conducting research on the use of LiDAR sensors and facilities for LiDAR sensors.