• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.365-369
• /
• 2002

Silica hydrogel was synthesized by the reaction of liquid sodium silicate with sulfuric acid. The condensation polymerization of the synthesized hydrogel was carried out via an aging process under the acidic or alkaline conditions. Nano porous silica with the pore size below 3 nm and surface area of $715m^2/g$, was obtained by the above processes in acidic ranges(pH : 3~5). The pore size and surface area of the silica varied with pH, and in alkaline ranges(pH : 8~10), those were 21 nm and $300m^2/g$ respectively. The characteristics of the silica varied with the thermal treatment which caused the change of surface area, pore volume and pore diameter.

• 약학회지
• /
• 제48권2호
• /
• pp.135-140
• /
• 2004

For the development of new COX-2 inhibitors, 1,5-diarylhydantoins 5a∼5c and 1,5-diaryl-2-thiohydantoin 6a∼6c were synthesized from commercially available phenylacetic acids through esterification, bromination, C-N bond formation and cyclization. Esters 2a∼c were efficiently synthesized from the starting materials 1a∼c by refluxing in absolute methanol for 3 hours with catalytic concentrated sulfuric acid. Bromination of 2a∼c was carried out with use of N-bomosuccinimide at rt in dichloromethane. The bromine of 3a∼c was substituted with aniline in ethanol or N,N-dimethylformamide to provide 4a∼c. Hydantoins and 2-thiohydantoins were synthesized from 4a∼c by treatment of potassium isocyanate or potassium thiocyanate in dil-ethanol with triethylamine.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.393-398
• /
• 2004

This research offers recycling method of NaOH from mercerizing process of cotton fabric. The measuring system of NaOH concentration was designed for the mercerizing process and tested for various conditions which can be occurred in factory. The accuracy of the system was varied as the testing condition was changed. As the concentration of sulfuric acid used for titrating NaOH decreased, the accuracy of measuring system increased. The concentration of NaOH for waste water collected from mercerizing process was measured by 5.2%. As the ratio of newly mixed NaOH increased, moisture regain. water absorbency and whiteness of the specimen increased. The bending rigidity(B) and shear rigidity(G) decreased, as the ratio of newly mixed NaOH increased.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.197-203
• /
• 1999

Stainless steels in general has passive film having strong corrosion resistance on surface. Therefore it must be necessarily removed by etching in mixing solution of sulfuric and chloric acid before Nitriding treatment. But in the ion nitriding, nitride layer was easily formed because passive film was removed without difficult by sputtering effect. The removal extent of these passive films was greatly effected by gas mixing ratios and pressure and holding times of pre sputtering factors in pre sputtering stage. As a results of experiment it has been known that pre sputtering pressure and holding time was not nearly effective on the formation behavior of nitride layer. But when A/H2 gas mixing ratios was 1/2 (vol%) was the most effective of the all pre sputtering conditions. It was resulted from the combination of mechanical reaction byArgon bombardment and chemical reaction by reduction of hydrogen on the passive film.

• 자연과학논문집
• /
• 제14권2호
• /
• pp.33-40
• /
• 2004

유기물이 포함된 황산아연 폐수로부터 황산아연을 회수하기위해서는 유기물의 제거가 필수적이다. 폐수 속에 포함된 유기물을 2차 오염물질이 거의 발생하지 않게 처리하기 위하여 오전 산화법과 흡착법을 병용하여 처리함으로서 효과적으로 유기물을 제거 할 수 있었다. 과량의 황산은 산화아연을 처리하여 황산아연 7수염을 제조함으로써 과량의 황산을 처리할 수 있었다. 폐수 1kg을 처리하여 740g의 황산아연 7수염을 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.179-180
• /
• 2022

In this study, analyzed the effect of using CGS before and after the pre-treatment process as fine aggregate on the resistance to sulfate attack in concrete. As a result of the analysis, Although it showed a similar tendency to Plain (CS100), it is judged that it is necessary to analyze the resistance to sulfate attack due to the increase in immersion periods such as 180 days and 365 days.

• Journal of Forest and Environmental Science
• /
• 제36권4호
• /
• pp.267-273
• /
• 2020

Diospyros mespiliformis is a highly valued and threatened tree species within the Sahelo-Sudanian zone of Africa, but its seed germination requirements under cultivation are not well researched. In a first experiment which aimed at determining germination response of seeds to dehydration, fresh seeds were dried at room temperature for 26 days during which their moisture content, their germinability, and their viability were monitored at two-day intervals. In the second experiment, 14 pre-germination treatments were tested for their effect on the germination of dried seeds. Results showed that fresh seeds had 52.7% moisture and achieved 97.7% germination. As seeds were dried, percentage germination gradually decreased with decreasing moisture content and reached 0% when moisture content had dropped to 18%. Meanwhile, seed viability remained at 100% over drying duration. Seeds that were not germinated after air dry also recorded 100% viability. The most effective treatment for inducing germination of dried seeds was scarification using 98% sulfuric acid for 30 min which resulted in 96.6% germination. This study reports for the first time in D. mespiliformis seeds a desiccation-induced dormancy which can be efficiently alleviated by acid scarification. This study provides useful information that will contribute to efficient management of D. mespiliformis seed resources for propagation.

• 대한환경공학회지
• /
• 제32권4호
• /
• pp.325-332
• /
• 2010

본 연구에서는 오존을 이용한 잉여슬러지의 가용화 실험을 실시하였다. 오존의 접촉효율을 높이기 위해 마이크로버블화된 오존(이하 마이크로버블 오존이라 함)을 이용하였으며, 생성된 마이크로버블 오존의 사이즈는 평균 직경 30 ${\mu}m$ 정도였고, 40 ${\mu}m$ 이하가 전체의 약 90% 정도를 나타내었다. 마이크로버블 오존을 이용한 슬러지 처리에 있어서는 슬러지 농도에 상관없이 오존주입율을 0.34 g $O_3/g$ SS 이하로 주입할 경우, 폐오존의 발생 없이 오존소모율이 100%인 것으로 조사되었다. 각 농도별 슬러지 처리에 있어서 슬러지의 초기 SS 농도를 6,447 mg/L, 5,557 mg/L, 3,180 mg/L, 1,092 mg/L 및 515mg/L로 하였을 경우, 동일한 오존주입율에 있어서 초기 SS의 농도가 증가할수록 제거되는 SS량이 증가하는 경향을 나타내어, 오존의 산화효율을 높이기 위해서는 초기 SS의 농도가 높은 슬러지를 처리하는 것이 효과적이었다. 한편, 슬러지의 복합 처리로서 산과 알칼리 그리고 오존처리를 검토한 결과, 오존의 전처리로서 산처리를 이용하는 것이 알칼리처리에 비해 효과적이었으며, 슬러지에 주입하는 황산의 농도를 0.01 N로 하고, 오존주입율 0.05 g $O_3/g$ SS로 처리한 경우, 제거된 SS의 양은 153.9 g으로 오존단독처리시 81.2 g에 비해 1.9배의 많은 양이 제거되었다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.350-357
• /
• 2017

PURPOSE. The object of the present study was to evaluate the shear bonding strength of composite to PEKK by applying several methods of surface treatment associated with various bonding materials. MATERIALS AND METHODS. One hundred and fifty PEKK specimens were assigned randomly to fifteen groups (n = 10) with the combination of three different surface treatments (95% sulfuric acid etching, airborne abrasion with $50{\mu}m$ alumina, and airborne abrasion with $110{\mu}m$ silica-coating alumina) and five different bonding materials (Luxatemp Glaze & Bond, Visio.link, All-Bond Universal, Single Bond Universal, and Monobond Plus with Heliobond). After surface treatment, surface roughness and contact angles were examined. Topography modifications after surface treatment were assessed with scanning electron microscopy. Resin composite was mounted on each specimen and then subjected to shear bond strength (SBS) test. SBS data were analyzed statistically using two-way ANOVA, and post-hoc Tukey's test (P<.05). RESULTS. Regardless of bonding materials, mechanical surface treatment groups yielded significantly higher shear bonding strength values than chemical surface treatment groups. Unlike other adhesives, MDP and silane containing self-etching universal adhesive (Single Bond Universal) showed an effective shear bonding strength regardless of surface treatment method. CONCLUSION. Mechanical surface treatment behaves better in terms of PEKK bonding. In addition, self-etching universal adhesive (Single Bond Universal) can be an alternative bonding material to PEKK irrespective of surface treatment method.

• 한국약용작물학회지
• /
• 제9권2호
• /
• pp.166-172
• /
• 2001

본 연구는 헛개나무 종자의 휴면 타파 방법과 발아 조건을 구명 하고자 실시하였다. 종피를 제거하지 않은 종자는 온도와 상관없이 발아하지 않았으나 종피를 제거하였을 경우에는 $15^{\circ}C$에서 94%가 발아되었다. 종피를 파상하기 위한 휴면타파 방법은 농황산을 40분간 처리하는 것이 효과적이었다. 종자를 건조 저장하였을 경우 채종 후 5년까지도 발아능력은 유지하고 있으나 발아율이 다소 낮아졌고 평균발아일수가 길었다. 장기(5년) 저장한 종자는 30일 이상의 저온처리에 의하여 발아율이 높아져 저온처리효과가 인정되었다.