• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.481-486
• /
• 1994

The effect of neutralization of urea-treated rice straw with sulfuric acid was investigated. Long-cut (15-20 cm) and short-cut (2-3 cm) rice straw were treated with 6% urea for 21 days, and the treated straw was mixed with an acid-molasses solution to neutralize free ammonia and kept airtightly in a plastic bag for 24 hours. The neutralized and non-neutralized straw were dried and subjected to chemical analysis and in vitro dry matter (DM) digestibility determination. The in vitro DM digestibility as well as crude protein (CP) content were remarkably improved by neutralization. Short-cutting of the straw before treatment gave a better result than the long-cut samples. Neutralization with sulfuric acid also affected the chemical composition and increased sulfur content of samples. The CP thus fixed by neutralization was proven to be kept stable for 3 months, and in vitro DM digestibility was not affected by the storing period.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.23-29
• /
• 1999

The effect of dilute sulfuric acid treatment was examined to improve recyclability of coated brokes. Turbidity , electric conductivity , and cationic demand of the white water from coated broke prepared from an alkaline base paper was determined. Sulfuric acid treatment was found to be effective in dissolving undisintegrated substances such as binders, pigments, and fibers. The properties of papers prepared by adding the broke to pulp stock up to 30% dry weight were examined . With the increase of broke addition, retention, sizing degree and smoothness were improved ; on the other hand, formation uniformness, air permeability and internal bonding strength were decreased. The extent of improvement by broke addition was greater for the surfuric acid-treated broke than the control broke. It was concluded that the use of coated broke should be limited within 10-15% weight of the product for either type of broke.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.136-140
• /
• 1979

The purpose of this investigation was to study the sulfuric acid digestion of monazite sand, and to prepare rare-earths-thorium containing material from the resulting solution which would be suitable for further preparation of thorium and rare earth elements by ion-exchange. Digestion of crude monazite sand was treated in $95{\%}C$ sulfuric acid for 2.0 hours at 150∼$250^{\circ}C$. The acid to sand weight ratio were 1 : 1.9∼2.8. Optimum condition was 95% sulfuric acid for 2.0 hours at $200{\pm}5^{\circ}C$. Within this conditions monazite sand was decomposed up to 99%.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3551-3553
• /
• 2012

1,5-Diacetyl-3,7-dinitro-l,3,5,7-tetraazacyclooctane (DADN) is a key intermediate in the preparation of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), one of the most powerful high-melting explosives. The present investigation focuses on nitrolysis of DADN to HMX by developing a new nitrolysis process involving the use of nitric acid catalyzed by Silica Sulfuric Acid (SSA). In order to optimize the process parameters for synthesis of HMX to obtain higher yield and purity, a study was carried out with variation of some parametric conditions like time, mole ratio of SSA and nitric. This method gave us green and mild conditions for nitration reaction.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.244-249
• /
• 2007

The properties of anodized films on aluminum 6061 alloy in single electrolyte of sulfuric acid and mixed electrolyte of sulfuric-boric acid and sulfuric-boric-nitric acid have been studied. Polarization tests in NaC solution were used to investigate the corrosion performance. Characteristics of film formation and surface morphology were examined by optical microscopy, FE-SEM and EDS. The results obtained have indicated that oxide films growth have been promoted by nitric acid and anodized films in mixed electrolyte have superior corrosion resistance. In case of anodic films formed in mixed electrolyte, some grooves and numerous crazings were also observed at the surface.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.25-26
• /
• 2019

The Reinforced concrete structure is deteriorated in durability due to various deterioration factors such as acid, salt, etc., and thus requires repair and reinforcement. In this study, compressive strength and weight change were measured by substituting blast furnace slag with excellent chemical resistance. As a result, the decrease in compressive strength decreased in proportion to the blast furnace slag substitution rate, and in the case of BFS40, the strength increased after sulfuric acid immersion. The weight change also decreased in proportion to the replacement amount.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.36-42
• /
• 2005

This study examined the feasibility of producing sulfuric acid and ammonia water from ammonium sulfate solution using two-compartment electrodialysis with a bipolar membrane (EDBM). Electrodialysis experiments were carried out with 20 wt% ammonium sulfate at different current densities and sulfuric acid concentrations in a concentrate compartment. The current efficiency increased with the current density from 25 to $100\;mA/cm^2$. Nevertheless, the efficiency was relatively low compared with that of general desalting electrodialysis, owing to the diffusion of sulfuric acid from the concentrate compartment to the diluate. The diffusion rate through the anion exchange membrane increased with the sulfuric acid concentration in the concentrate compartment, which decreased the current efficiency. Conversely, the electrical resistance decreased with increasing current density owing to the Joulian heat generated during water dissociation in the transition region of the bipolar membrane under a high electric field. From the experimental results, we concluded that operating at a higher current density is effective from the perspective of current efficiency and electrical resistance when producing sulfuric acid and ammonia water from ammonium sulfate using a two-compartment EDBM process. Further studies on the effects of increasing the sulfuric acid concentration on current efficiency are required to apply the EDBM process practically.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.110-117
• /
• 2003

A thermotolerant yeast strain, Saccharomyces cerevisiae KNU5377 (abbreviated as KNU5377, was exposed to inorganic acids including sulfuric, nitric and hydrochloric acid. As a stressor, each inorganic acid is very easily dissociated in water, resulting in lowering environmental pH. When compared with a reference S. cerevisiae ATCC24858, KNU5377 could overcome such a severe condition containing a final 0.4% concentration of sulfuric acid or nitric acid to grow at the overnight culture, but this reference could not. Additionally, this strain showed a surprisingly strong tolerance by surviving despite of exposure to the regime of 0.35% of hydrochloric acid for over 90 min and also to 0.6% of sulfuric acid for 30 min. On the contrary, both strains could not survive against a final 0.45% concentration of nitric acid. This strain KNU5377 could produce ethanol of 3% in 2 days by using the fermentation medium containing a final 0.3% concentration of sulfuric arid. Moreover, change into a final 0.2% concentration of sulfuric acid caused this strain to enhance fermentation productivity up to about 4.5% even at $40^{\circ}C$. In exposure to a final 0.2% of sulfuric acid for 60 min, trehalose was most accumulated within 30 min in KNU5377, and this suggested a cellular defense system led by this disaccharide was profitable for this strain to lead to no morphological changes.

• Resources Recycling
• /
• v.10 no.2
• /
• pp.20-26
• /
• 2001

Sulfuric acid leaching of Mn, Co and Fe from spent petrochemical catalyst was performed using hydrogen peroxide as a reducing agent. Low extraction of Mn, Co and Fe was obtained by only sulfuric acid. When hydrogen peroxide were added as a reducing agent, the high extraction of these metals could be obtained. Different from ordinary leaching, the extraction per-centages of metal components decreased with elevating leaching temperature in this process. Under the optimum condition, the extraction percentages of Mn, Co and Fe were 93.0% , 87.0% and 100% respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.167-172
• /
• 2017

In this study, high performance patching repair mortars with light weight and sulfuric acid resistance properties were suggested. Their performance estimation were investigated based on KS F 4042 using patching repair mortar with light weight aggregate and soluble polymer of Type I and sulfuric acid resistance mortar of Type II, From these results, it was confirmed that these motors were satisficed and improved by all standard tests of KS F 4042.