• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.2
• /
• pp.159-165
• /
• 1997

The primary objective of this study was to learn the effect of various sugar particle size and level on cookie spread, The effect of sugar particle size and level on sugarsnap cookie spread was studied. Three different particle sized sugars; powered sugar, granulated sugar and sanding sugar, were used for the cookie test baking with five different sugar levels; 30, 45, 60, 75 and 90% based on the weight of flour. In mixing process, 5 minutes of creaming time was used for cream making and then the specific gravity of cream was measured on the basis of each different sugar particle size and level. In the result, the specific gravity of cream was influenced by sugar particle size and sugar level. However, the specific gravity of cream had no influence on cookie dough specific gravity. Cookie spread was influenced by sugar particle size and sugar level. Greater cookie spread was obtained by decreasing sugar particle size and increasing sugar level resulted in increased spread. Therefore, selection of suitable sugar particle size and its use level can be factors in controlling spread and imparting desired packaging characteristics.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.75-79
• /
• 1989

The rheological properties of sugar and cocoa particle suspensions in cocoa butter under molten condition were analyzed with Haake rotationary viscometer. Both suspensions had yield value and showed rheopexy at low shear rate and thixotropy at high shear rate. Flow behaviors of the suspensions were analyzed with modified Casson model. Casson viscosity and yield value increased with increasing the concentration of sugar and cocoa particles. There was an obvious dependence of the Casson viscosity and yield value on the particle size distributions that was represented by the Sauter mean diameter of the particles. Casson viscosity and yield value of cocoa butter-sugar suspension increased with increasing the fineness of sugar particle crystal. With increasing the fineness of cocoa particle a decreasing Casson viscosity of cocoa butter-cocoa particle suspension was achieved, but the yield value did not change significantly with cocoa particle size. Therefore, it was predicted that the best rheological properties of chocolate could be obtained with the combination of coarse ground sugar $(d=36.30{\mu}m)$ and fine ground cocoa particle $(d=14.81{\mu}m)$ within the studied range.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.334-344
• /
• 2023

Dregs from the sugar palm (Arenga pinnata) starch industry are considered a waste product of the agricultural industry and have not yet been optimally utilized. Therefore, this study aimed to manufacture particleboards from dregs using different amounts of adhesive and particle size ratios. Sugar palm dregs, which had been separated into fibers and powder/fine particles, were used as raw material for making particleboards. The fiber had an average length of 6.84 ± 3.23 cm, while the fine particles were of a size that passed through size 10 mesh and remained in size 60 mesh. Three ratios of fiber to fine particles (100:0, 75:25, and 50:50 wt%) with three different amounts of sucrose-citric acid adhesive (10, 15, and 20 wt%) were used in this study. Increasing the amount of fine particles and the resin content can improve the physical properties and the internal bond strength of boards made from sugar palm dregs. The fine particles possibly filled the gap between the fibers in the particleboard, while the fibers exhibited a high bending strength. As a result, a high-performance particleboard can be attained by combining the composition ratio of fiber/fine particles and resin content. In this study, particleboards made from fiber/fine particles (75:25 wt%) and adhesive content of 15 wt% and 20 wt% had the mechanical properties that met the requirements of Japanese Industrial Standard (JIS) A 5908 type 18. Sugar palm dregs have the potential to be used as raw materials to create value-added particleboards.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.229-236
• /
• 2022

An experimental investigation was conducted on the influences of median size, dust concentration, dust condition (cloud and layer) for the fire and explosion hazard assessment of dusts with the same powder property. For this purpose, tests have been performed in accordance with 20 L explosion sphere, thermogravi- metric analyze, combustion rate tester (UN method). We investigated the explosion characteristics and flame propagation velocity (FPV) in dust cloud and the flame spread velocity(FSV) over dust layer on 8 dust samples with different particle sizes of 4 types of dusts (Sugar, Mg, Al, Zr). An explosion hazard increased with decreasing particle size in Mg and Al dust clouds, but sugar did not show the effect of explosion hazard due to particle size change in dust clouds. The flame propagation velocity (FPV) of suspended dusts increased significantly when the particle size decreased from micro to nano than the variation of particle size in micro range. The flame spread velocity (FSV) over dust layer showed a tendency to increase over the inclined dust layers (30° slope) rather than the horizontal dust layers (0° slope). The flame spread rate (FSV) over dust layers increased on the inclined dust layer (30° slope) rather than the horizontal dust layer (0° slope) and was higher upward flame than the downward flame in condition of inclined dust layers(30° slope).

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.122-131
• /
• 2001

Pakistan being the 6$^{th}$ largest sugar producer has over 75 sugar mills with annual production capacity of about 2.4 million tons during 1996-97. The contribution of Sindh with 27 sugar mills is recorded over 50% of the total sugar production. The majority of the mills in Pakistan use the Defecation-Remelt-Phosphitation (DRP; 24 mills), Defecation-Remelt-Carbonation (DRC; 21 mills) and Defecation-Remelt Carbonation and Sulphitation (DRCS; 11 mills) process. Seven of the 75 sugar mills in Pakistan also produce industrial alcohol from molasses, a by- product of sugar manufacturing process. These sugar industries also produce fly ash, which have been found to contain unburned carbon and reach as far as four-kilo meter area with the wind direction, threatening the community health of people living around, besides posing other aesthetic problems. The untreated wastewater, in many cases, finds its way to open surface drains causing serious threat to livestock, flora and fauna. One study showed that fly ash emitted from the chimneys contain particle size ranging from 38 ${\mu}{\textrm}{m}$ to 1000 ${\mu}{\textrm}{m}$. About 50 per cent of each fly ash samples were above 300 ${\mu}{\textrm}{m}$ in size and were mostly unburned Carbon particles, which produced 85% weight loss on burning in air atmosphere at 1000${\mu}{\textrm}{m}$. This fly ash (mostly carbon) was the main cause of many health and aesthetic problems in the sugar mill vicinity. The environmental challenge for the local sugar mills is associated with liquid waste gaseous emission and solid waste. This paper discusses various waste recycling technologies and practices in sugar industries of Pakistan. The application of EM technology and Biogas technology has proved very successful in reusing the sugar industry wastewater and mud, which otherwise were going waste.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.269-276
• /
• 1995

Uncooked rice Tackju was prepared from the groud rice with different particle size such as 12, 20, 35 and 50 mesh, and its characteristics were analysed during the brewing. Reducing sugar and ethanol contents as well as yeast cell counts were the highest in main mash and Tackju prepared from 20 mesh fraction. Especially, reducing sugar content was about. 1.5-2.5 times as much as that obtained from 35 or 50 mesh fraction. The final concentration of ethanol in main mash prepared from 20 mesh fraction was 14.8%(v/v). It was about 1.5%(v/v) higher than the lowest one [13.35%(v/v)] which was prepared from 12 mesh fraction. No significant difference In total acidity was observed. Sensory evaluation revealed 20 or 35 mesh Tackju to be the best in overall preference, especially in sweet and refreshing tastes.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.352-359
• /
• 1990

The synergistic effect of glucoamylase and a -amylase on the hydrolysis of raw corn starch in an agitated bead reaction system was studied by investigating the changes of sugar profiles, the granular structure, particle size distribution, and X-ray diffraction pattern of residual raw corn starch. The enzymatic hydrolysis of raw corn starch was greatly enhanced by synergistic effect of glucoamylase and $\alpha$ -amylase. Even though the sugar profiles were mainly determined by the mixing ratio of glucoamylase and $\alpha$-amylase; raw starch was mainly converted to glucose directly without accumulation of any significant amount of oligosaccharides. The cavity formation and fragmentation phenomena of raw corn starch granule subjected to enzyme reaction were analyzed by means of SEM and the particle size distribution. The X-ray diffraction pattern of raw starch was not changed at the initial stage of reaction but slightly changed at the late stage of hydrolysis, which may be caused by the preferential degradation of amorphous region by enzymatic reaction, not by the destruction of microcrystalline structure of raw corn starch.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.5
• /
• pp.631-640
• /
• 2014

In this study, manufactured a cream soup by varying addition of Hericium erinaceus and decided its recipe, and conducted particle size analysis, calorimetry, sensory test for investigating physicochemical characteristics and quality characteristics (salinity, sugar content, color value, pH, viscosity), antioxidant activities of soup, and mechanical sensory test for objectivity. This study found that moisture content in Hericium erinaceus powder was 6.16%, crude protein 26.87%, crude fat 4.62% and crude ash was 10.75% respectively. No significant differences were found in salinity, sugar content, pH according to addition of Hericium erinaceus. As for color value of cream soup manufactured by adding Hericium erinaceus, L value decreased with increase in addition of Hericium erinaceus, whereas a value and b value increased. The more the addition of Hericium erinaceus, the higher the viscosity, which increases concentration of soup. As result of analysis on antioxidant activities of Hericium erinaceus cream soup, antioxidant activities increased with increase in addition of Hericium erinaceus. Particle size analysis showed results similar to that of viscometry, which means that the smaller the particle size, the higher the viscosity, whereas viscosity lowered vice versa. Calorie of cream soup showed no significant difference notwithstanding the amount of addition. As a result of sensory test, S5 with 5% of Hericium erinaceus powder was highest rated in color, flavor, taste, umami taste and overall preference. As a result of mechanical sensory test, umami taste increased with increase in addition of Hericium erinaceus powder, whereas bitterness taste lowered significantly (p<0.05) with addition of Hericium erinaceus. As for salty taste, both control group and experimental group that added Hericium erinaceus powder showed no significant difference. Accordingly, experimental group with 5% of Hericium erinaceus powder was proved to be the most desirable.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1129-1129
• /
• 2001

Maize, in Hungary, is the fodder-plant grown in the biggest quantity. It is not only used as a fodder but other products such as iso-sugar are made from it, too. The quality of the fodder and the produce is largely dependent on the composition of the supplied maize to the processing site. The examination of quality parameters besides conventional methods are investigated and measured by NIR spectroscopy on a routine basis. The investigated parameters are the following: water, total protein, starch and oil content. The accuracy and precision of determining these parameters we, apart from the wet chemical methods, influenced by sample preparation to a great extent. One of the main features of this is the sample particle size and its distribution across the sample. The uneven distribution of particle size negatively influences the measurement accuracy, decreases model robustness and prediction ability. With these in mind the aim of our experiment was to investigate the effect of particle size on the accuracy of maize composition determination using reflection measurement setup. In addition, we tested different spectrum transformations, which are suitable for canceling this effect. In our experiment 47 samples were analyzed with three different mesh sizes (1.5mm, 1.8mm and 2mm). The results of our findings are presented here.

• Clean Technology
• /
• v.28 no.1
• /
• pp.32-37
• /
• 2022

Food waste is produced from food factories, food services, and home kitchens. The generated mass reached 5.4 million tons/year in 2020. The basic management technology for such waste has been biological degradation under an anaerobic environment. However, the whole process is intrinsically slow and considerably affected by the inner physicochemical properties of the waste and other surrounding conditions, which makes optimization of the process difficult. The most promising options to counter this massive generation of waste are eco-friendly treatments or recycling. As a preliminary step for these options, attempts were made to evaluate the feasibility and usability of three simulative models based on reaction kinetics. Model (A) predicted relative changes over reaction time for reactant, intermediate, and product. Overall, an increased reaction rate produced less intermediate and more product, thereby leading to a shorter total reaction time. Particle diminishing model (B) predicted reduction of the total waste mass. The smaller particles diminished faster along with the dominant effect of microbial reaction. In Model (C), long-chain cellulose was predicted to transform into reducing sugar. At a standard condition, 48% of cellulose molecules having 10⁵ repeating units turned into reducing sugar after 100 h. Also it was found that the optimal enzyme concentration where the highest amount of remnant sugar was harvested was 1 mg L^-1.