• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2762-2767
• /
• 2011

With increasing use of wireless mobile devices like smartphone and tablet PC, telecommunication companies have been providing the internet service by installing a multitude of access points (AP) in subway stations. Most of these APs use frequency of 2.4 GHz band range and the three telecom providers (SKT, KT, LGT) are using the limited channels within this range without any regulations. The channels within 2.4GHz band are already saturated as the companies are setting up wireless AP even within the subway trains for better service. This can affect other 2.4GHz wireless devices used for other purposes with channel interference, etc. This study has tested and analyzed the effects of the wireless APs installed within the subway stations and trains for the internet service on ZigBee-based sensor network for the intelligent surveillance system of urban transit, which is currently being developed and installed.

• Particle and aerosol research
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2015

In this study, the flow around a subway train running in an underground tunnel was numerically estimated. For the validation of the numerical results, the airflow velocity at a point underneath a subway train was measured using an ultrasonic anemometer. Then, the trajectories of particles generated at the contact points between the wheels and rails were numerically predicted. By considering the airflow velocity and particle trajectories, the space underneath the T-Car (trailer car) was expected to be appropriate for the room for the installation of a dust-removal system.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.28-38
• /
• 1994

The objective of this study were to measure concentrations of indoor pollutants in public transportation systems to provide importance of indoor air quality in transportation systems to policy makers. Indoor air quality of the pollutants (CO, CO$_2$, PM-10) and environmental sources (temperature, humidity) were measured at subway, seat-type bus, and city-type bus in the Seoul area from April to September 1992. The same pollutants and environmental sources were also measured at selected bus stops and subway stations during October 1991-September 1992. The mean concentrations of indoor pollutants in the public transportation systems were showed 115.5 $\mu$g/m$^3$ in PM-10, 6.8 ppm in CO, and 2167.9 ppm in CO$_2$, respectively. The mean values of PM-10 and CO showed below the U.S. 24 hour standard value of PM-10 and the Korea ambient CO standard, while the mean concentrations of CO$_2$ exceeded the Korea CO$_2$ standard. The highest levels of indoor concentration at public transportation systems were PM-10 of 134.6 $\mu$g/m$^3$ in the subway, CO of 8.9 ppm in the city-type bus, CO$_2$ of 2,511.1ppm in seat-type bus, respectively. The results showed that indoor air quality in bus and subway seemed likely to be affected by number of passengers and outdoor air infiltrated from exhausted gases of automobiles.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.3
• /
• pp.41-46
• /
• 2009

A new subway, line 9 linking Western and Eastern Seoul began its services for citizens between Gimpo airport and Gangnam area within 30 minutes by express transit service. Seoul Metro Line 9 Corporation plans to operate both local transit service which will stop at every station, and express transit service that will stop at several key stations including junctions. The passengers on line 9 will be able to transfer to lines 2, 3, 5, 8, Bundang and Incheon International Airport. The Line 9 is expected to disperse the demand for line 2, having the most number of subway users, and will provide passengers with less crowded travel. The new line will also help residents in southern Seoul outskirts and Gyeonggi provincial cities including Bundang vicinity, and Gangdong area commuters get better access to Gimpo and incheon Airports. The Corporation expects to transfer 560,000 passengers daily by the subway line 9. Seoul Development Institute conducted network reshuffle study for Seoul Metro system to sort out congestion problem due to its irrational line alignments and inconvenient transfer. Among several candidate plans of network reshuffling, the direct connection of line 9 with line 5 was chosen as a pilot study. The study found that direct connection of the 2 lines is essential for enhancing transit utility and reducing automobile commuters.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.35-40
• /
• 2006

A study on fire phenomena in a subway transit mass station has been carried out as a part of disaster prevention plan at the subway station. The ventilation facilities installed in both the platform and the trackway are designed to convert into a smoke exhaust system in emergency situation, creating such an environment as necessary for evacuation. 3 dimensional Numerical Simulations based on the CFD are carried out using a simulation tool, Fire Dynamic Simulator. Additionally, four different vent modes are made and performances are compared with the original design mode and each other to find better operation of vents at both the platform and the trackway in case of fire. From the result, an vent operational characteristics under the condition of installed PSD is clarified for the effective smoke and heat removal from the platform area compared with non installed PSD.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.20-27
• /
• 2009

This paper presents an analytic study for replacement of the ballast track in existing subway bridge by the Precast slab panel(B2S) track. To evaluate the dynamic responses on application of B2S track, the time history analysis with the 3D modeling. A total of two models, which were one ballast track bridge and B2S track bridge, were used in the FE analysis. The results of this study show that the dynamic displacement and acceleration of the B2S track bridge were significantly reduced for a higher train speed, compared to the ballast track bridge. Also, the replacement of the ballast track bridge in existing subway bridge by the B2S track increased the structural safety of bridge and ensured sufficient dynamic stability and serviceability. As a result, the servicing subway bridge with B2S track system has need of the reasonable measures which could be reducing the static and dynamic response and improving the performance.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.199-211
• /
• 1995

Bus, Which is together with subway the main part of public transportation modes in the city, is reviewed for the development of an optimal feeder-bus service area. Based on the IDRISI of GIS package, and taking into account of the convenience of downtown-oriented public transportation users at peak time, a model for the development of feeder-bus service area and a solution and introduced. Major result in this study is as follows: Development is given to a model that is designed to overcome the shortage of the existing models, which has limits in simulating the real situation; Variables were used in combination so that bus and subway route, station spacing, and operating frequency can be determined simultaneously, which enables to elucidate the mutual relationship and the structure in public transportation system. A model for feeder-bus area development is also given applied to determination and opening of subway and urban express bus route and new transportation systems. The model developed in this paper is useful in the case of extension and opening of subway and urban express bus route and new transportation Systems.

• Geomechanics and Engineering
• /
• v.30 no.3
• /
• pp.313-324
• /
• 2022

With the development of the economy, people's utilization of underground space are also improved, and a large number of cities have begun to build subways to relieve traffic pressure. The choice of subway station construction method is crucial. If an inappropriate construction method is selected, it will not only waste costs but also cause excessive deformation that may also threaten construction safety. In this paper, a subway station construction scheme selects model based on the AHP-fuzzy comprehensive evaluation. The rationality of the model is verified using numerical simulation and monitoring measurement data. Firstly, considering the economy and safety, a comprehensive evaluation system is established by selecting several indicators. Then, the analytic hierarchy process is used to determine the weight of the evaluation index, and the dimensionless membership in the fuzzy comprehensive evaluation method is used to evaluate the advantages and disadvantages of the construction method. Finally, the method is applied to Liaoyang east road station of Qingdao metro Line 2, and the results are verified by numerical simulation and monitoring measurement data. The results show that the model is scientific, practical and applicable.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.583-586
• /
• 2000

A passive RF smart card incorporating a non volatile memory element is powered by inductive coupling to a proximately located RF reader. Therefore, the power consumption in the smart card should be low. In this study, we designed the low power passive RF smart card that is operated at 125kHz to apply to the subway ticket system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.94-100
• /
• 2011

TCMS is the most important controller in the subway train for reliable train control and service oriented flexibility. TCMS software charges communications and control of train and maintains control devices so we use QNX for real-time control. This paper introduces overall software development of TCMS using various diagrams. Software implementation details in TC and CC are explained using deployment diagram through train configuration. Driving control process among many processes is focused to present implement details which controls train by driver or automatic train operation and handles commands to control deriving devices in cars. Reliable operation of train and easy maintenance process is achieved through the same hardware in train control computer and car control computer.