• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.93-96
• /
• 2004

In this paper, we analyzed the current limiting characteristics according to increase of source voltage in the flux-lock type high-Tc superconducting fault current limiter (SFCL). The flux-lock type SFCL consisted of two coils, which were wound in parallel each other through an iron core, and high-Tc superconducting (HTSC) element connected with coil 2 in series. The flux-lock type SFCL has the characteristics better in comparison with the resistive type SFCL because the fault current in the flux-lock type SFCL can be divided into two coils by the inductance ratio of coil 1 and coil 2. The fault current limiting operation of the flux-lock type SFCL can be different due to winding direction of the two coils. The winding method where the decrease of linkage flux between two coils in the accident happens is called the subtractive polarity winding and the winding method in case of the increase of linkage flux is called the additive polarity winding. The fault current limiting experiments according to the source voltage were performed for these two winding methods. Through the comparison and the analysis of the experimental data, we confirmed that the quench time was shorter, irrespective of the winding direction as the source voltage increased and that the fault current and the HTSC's resistance increased as the amplitude of the source voltage increased. The additive polarity winding made the fast quench time and the lower resistance of HTSC element in comparison with the subtractive polarity winding. The fault current of the subtractive polarity winding was larger than that of the additive polarity winding. In conclusion, we found that the additive polarity winding reduced the burden of SFCL because the quench time was shorter and the fault current was smaller than those of the subtractive polarity winding.

• Radiation Oncology Journal
• /
• 제23권1호
• /
• pp.43-50
• /
• 2005

목적 : 자경경부암세포에서 polymeric chain reaction (PCR)원리를 이용한 suppression subtractive hybridization (SSH) 방법으로 방사선조사 시 차등 발현되는 유전자를 동정하고자 하였다. 대상 및 방법 : 자궁경부암세포주인 HeLa세포주에 방사선조사 전과 후 총 RNA와 poly $(A)^+$ mRNA를 분리였다. SSH방법으로 forward 및 reverse-subtracted cDNA libraries를 만들었다. 차등 발현된 유전자를 screening하기 위해 reverse Northern blotting (dot blot analysis)을 이용하여 각각의 library에서 88개의 클론을 선택하였고 Nothern blotting으로 확인 후 sequencing하였다. 결과 : screening상 176개 클론 중 forward-subtracted library에서 10개의 유전자가 reverse-subtracted library에서 9개의 유전자가 동정되었다. forward-subtracted library로부터 3개의 유전자가 Northern blotting에 의하여 확인되었고 이중 telomerase catalytic subunit and sodium channel-like protein 유전자와 1개의 ESTs (expressed sequence tags) 유전자가 방사선선량에 따라 증가하쳐다. 결론 : 본 연구를 통해 자궁경부암세포주에서 방사선에 의해 유도되는 유전자를 SSH 방법을 통해 동정할 수 있었다. 그러나 이러한 유전자가 어떤 생물학적인 기능을 갖고 있는지에 대한 계속적인 연구가 필요하다

• 대한치과기공학회지
• /
• 제45권2호
• /
• pp.31-38
• /
• 2023

Purpose: This in vitro study aimed to compare the trueness of 3-unit fixed dental provisional prostheses (FDPs) fabricated by three different additive manufacturing and subtractive manufacturing procedures. Methods: A reference model with a maxillary left second premolar and the second molar prepped and the first molar missing was scanned for the fabrication of 3-unit FDPs. An anatomically shaped 3-unit FDP was designed on computer-aided design software. 10 FDPs were fabricated by subtractive (MI group) and additive manufacturing (stereolithography: SL group, digital light processing: DL group, liquid crystal displays: LC group) methods, respectively (N=40). All FDPs were scanned and exported to the standard triangulated language file. A three-dimensional analysis program measured the discrepancy of the internal, margin, and pontic base area. As for the comparison among manufacturing procedures, the Kruskal-Wallis test and the Mann-Whitney test with Bonferroni correction were evaluated statistically. Results: Regarding the internal area, the root mean square (RMS) value of the 3-unit FDPs was the lowest in the MI group (31.79±6.39 ㎛) and the highest in the SL group (69.34±29.88 ㎛; p=0.001). In the marginal area, those of the 3-unit FDPs were the lowest in the LC group (25.39±4.36 ㎛) and the highest in the SL group (48.94±18.98 ㎛; p=0.001). In the pontic base area, those of the 3-unit FDPs were the lowest in the LC group (8.72±2.74 ㎛) and the highest in the DL group (20.75±2.03 ㎛; p=0.001). Conclusion: A statistically significant difference was observed in the RMS mean values of all the groups. However, in comparison to the subtractive manufacturing method, all measurement areas of 3-unit FDPs fabricated by three different additive manufacturing methods are within a clinically acceptable range.

• 한국환경성돌연변이발암원학회:학술대회논문집
• /
• 한국환경성돌연변이발암원학회 2003년도 추계학술대회
• /
• pp.130-130
• /
• 2003

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2007년도 제47회 종합학술대회 연제초록
• /
• pp.52-52
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.58-58
• /
• 2004

• IMMUNE NETWORK
• /
• 제4권4호
• /
• pp.237-243
• /
• 2004

Background: The normal functions of the cell cycle inhibitor p16INK4a are frequently inactivated in many human cancers. Over 80% of hepatocellular carcinoma (HCC) cases lack a functional p16/Rb pathway. p16/Rb pathway, as well as p53 pathway, is considered as one of key components of tumor suppression. Methods: To study the roles of p16INK4a in HCC, a stable cell line expressing exogenous p16 was generated from SNU-449 hepatocellular carcinoma cells lacking endogenous p16, and suppression subtractive hybridization (SSH) was performed in parallel with the control cells. Results: 1) SSH identifies fibronectin (FN1), crystallin ${\alpha}B$ (CRYAB), Rac1, WASP, RhoGEF, and CCT3 as differentially-expressed genes. 2) Among the selected genes, the up-regulation of FN1 and CRYAB was confirmed by Northern blot, RT-PCR and by proteomic methods. Conclusion: These genes are likely to be associated with the induction of stress fiber and stabilization of cytoskeleton. Further studies are required to clarify the possible role of p16 in the signal transduction pathway.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.102-107
• /
• 2016

Stress may be defined as any modification of environmental parameters that leads to a response by biological organisms. Stresses that affect biolpgical structures may be nonthermal, such as ultraviolet radiation, pH, or salinity, or thermal. Temperture is one of the major stresses that all living organism face. The major effects of cold(low emperature) are decrease of membrane fluidity and the stabilization of secondary structures of RNA and DNA in the cells, which may effect the efficiency of translation, transcription, and DNA replication. In this study, we focus on discovering the genes that are expressed by the cold(low temperature) stress in the silkworm. In cold(low temperature) stress test, we found 100% survive from cold stress at $0^{\circ}C$ up to 12h and $-5^{\circ}C$ up to 2h, and then, survive rate was rapidly decrease in silkworm. Thereafter two whole genes have selected by SSH(Suppression subtractive hybridization). (GenBank accession : GQ149511, GQ338156)

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1107-1132
• /
• 2015

A damage detection algorithm based on neuro fuzzy hybrid system is presented in this study for location and severity predictions of cracks in beam-like structures. A combination of eigenfrequencies and rotation deviation curves are utilized as input to the soft computing technique. Both single and multiple damage cases are considered. Theoretical expressions leading to modal properties of damaged beam elements are provided. The beam formulation is based on Euler-Bernoulli theory. The cracked section of beam is simulated employing discrete spring model whose compliance is computed from stress intensity factors of fracture mechanics. A hybrid neuro fuzzy technique is utilized to solve the inverse problem of crack identification. Two different neuro fuzzy systems including grid partitioning (GP) and subtractive clustering (SC) are investigated for the highlighted problem. Several error metrics are utilized for evaluating the accuracy of the hybrid algorithms. The study is the first in terms of 1) using the two models of neuro fuzzy systems in crack detection and 2) considering multiple damages in beam elements employing the fused neuro fuzzy procedures. At the end of the study, the developed hybrid models are tested by utilizing the noise-contaminated data. Considering the robustness of the models, they can be employed as damage identification algorithms in health monitoring of beam-like structures.

• 한국치위생학회지
• /
• 제19권6호
• /
• pp.1089-1097
• /
• 2019

Objectives: The purpose of this study is to assess the accuracy of provisional restorative resins fabricated using dental three-dimensional (3D) printers. Methods: Provisional restorative resins were fabricated using the first molar of the right mandibular. Three groups comprising a total of 24 samples of such resins were fabricated. The prepared abutment was scanned initially and then designed using a computer-aided design (CAD) software. The conventional subtractive manufacturing system was employed to fabricate the first group of resins, while the second and third groups were fabricated using a digital light processing (DLP) 3D printer and a stereolithography (SLA) 3D printer, respectively. The internal surfaces of the resins were scanned and 3D measurements of the resins were taken to confirm their accuracy. Results: The root-mean-square deviation (RMS±SD) of the accuracy of the resins fabricated using the conventional subtractive manufacturing system, DLP 3D printer, and SLA 3D printer were 68.83±2.22 ㎛, 74.63±6.23 ㎛, and 61.74±4.09 ㎛, respectively. A one-way analysis of variance (ANOVA) test showed significant differences between the three groups (p < 0.05). Conclusions: Provisional restorative resins fabricated using DLP and SLA 3D printers demonstrated clinically-acceptable results.