• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.56-61
• /
• 2002

평판 날개의 플러터에 대한 실험적 연구가 수행되었으며, 여러 가지 플러터 해석 방법들을 실험결과와 비교함으로써 검증하였다. 플러터 실험을 위한 날개 모델과 장치들이 아음속 풍동에 설치되었다. 시스템 식렬법을 이용하여 풍동 실험 데이터로부터 플러터 속도를 예측하였다. 날개 모델의 플러터 해석을 위해 MSC/NASTRAN, V-g방법, 근궤적법이 사용되었다. 해석으로 구한 플러터 속도와 실험으로부터 추정된 플러터 속도를 비교하였으며, 그 결과 잘 일치하였다. 본 연구의 날개 모델이 플러터 해석의 벤치마크 모델로 사용될 수 있을 것이다.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.21-26
• /
• 2001

This paper represents the turbulent intensity, the turbulent kinetic energy and Reynolds shear stress in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. The experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The turbulent intensity and the turbulent kinetic energy show that the maximum value is formed in the narrow slits distributed radially on the edge of a cone type swirl burner, hence, the combustion reaction is anticipated to occur actively near this region. And the turbulent intensities ${\upsilon}\;and\;{\omega}$ are disappeared faster than the turbulent intensity u due to the inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the Reynolds shear stress $u{\upsilon}$ is distributed about three times as large as the Reynolds shear stress $u{\omega}$ in the outer region of the cone type gas burner.

• 한국항공우주학회지
• /
• 제39권9호
• /
• pp.816-822
• /
• 2011

본 연구에서는 프로펠러의 형상 및 환경 요소의 영향에 따른 추력값을 빠르게 계산할 수 있는 프로그램을 개발하였다. 여기서 유도 요소를 계산하기 위해서, 카와다에 의해 소개된 준-무한 나선와류 모델을 이용하였다. 본 code의 구조는 Wrench의 프로펠러 양력선 이론에 기초하여 제작되었으며, 프로펠러의 추력, 파워 및 효율 등의 공력값을 계산할 수 있다. 1차적인 프로그램의 신뢰성 있는 검증을 위해 NACA 보고서의 시험 결과와 비교 및 검증을 시행하였다. 2차적인 프로그램의 검증을 위해서는, 프로펠러 회전속도와 전진 속도에 변화를 주면서 아음속 풍동 시험을 수행하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.201-209
• /
• 2013

Much numerical and experimental research has been done for the flow around an oscillating airfoil. The main research topics are vortex shedding, dynamic stall phenomenon, MAV's lift and thrust generation. Until now, researches mainly have been concentrated on analyzing the wake flow for the variation of frequency and amplitude at a low angle of attack. In this study, wake structures and acoustic wave propagation characteristics were studied for a plunging airfoil at high angle of attack. The governing equations are the Navier-Stokes equation with LES turbulence model. OHOC (Optimized High-Order Compact) scheme and 4th order Runge-Kutta method were used. The Mach number is 0.3, the Reynolds number is, and the angle of attack is from $20^{\circ}$ to $50^{\circ}$. The plunging frequency and the amplitude are from 0.05 to 0.15, and from 0.1 to 0.2, respectively. Due to the high resolution numerical method, wake vortex shedding and pressure wave propagation process, as well as the propagation characteristics of acoustic waves can be simulated. The results of frequency analysis show that the flow has the mixed characteristics of the forced plunging frequency and the vortex shedding frequency at high angle of attack.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.106-109
• /
• 2007

The spray plume characteristics of liquid water jet injected into subsonic cross-flow at 42 m/s were experimentally investigated. Nozzle has a 1.0 m diameter and L/D=5. Droplet sizes, velocities, volume flux were measured at each downstream area of the injector exit using phase Doppler particle anemometry. Measuring probe position is moved with 3-way transversing machine. Experimental results indicate that SMD is varied from 75 to $120{\mu}m$ distribution and it is uncertain layer structure. SMD peaks at the top of the spray plume. This phenomenon is related to the momentum exchange between column waves and cross-flow stream. Droplet vector velocities were varied from 11.5 to 33 m/s. A higher-velocity region can be identified in down edge region at Z/D : 40, 70 and 100. Lower-velocity region were observed on bottom position of the spray plume. Volume flux is a criterion to the droplet concentration. All volume flux distribution has a same structure that continuously decreases from the center region to the edge of the plume. Z/D : 20 is spatially less concentrated than in Z/D : 100.

• 한국추진공학회지
• /
• 제17권3호
• /
• pp.9-14
• /
• 2013

수소를 연료로 사용하는 마하 5 스크램젯 엔진 모델에 대해 불어내기식 시험 설비를 사용해 연소 시험을 수행했다. 두 가지 모델 형상에 대해 각각 연료가 없는 경우와 두 가지 당량비로 연료를 공급한 경우를 시험했다. 모델 내부의 벽면 정압력을 측정해 시간에 대한 데이터와 시간 평균한 공간적 데이터 분포를 사용해 모델 내부의 유동과 연소 현상을 분석했다. 모델 길이가 짧은 경우는 두 가지 당량비 모두에서 초음속 연소가 일어났다. 모델 길이가 긴 경우는 낮은 당량비에서는 초음속 연소가, 높은 당량비에서는 열질식이 발생하면서 아음속 연소가 일어났다. 이 때 흡입구 불시동은 발생하지 않았다.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.25-31
• /
• 2000

This paper represents the vector fields and three dimensional mean velocities in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. This experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component is focused in the narrow slits distributed radially on the edge of a cone type swirl burner, for that reason, there is some entrainment of ambient air in the outer region of the burner and the rotational flow can be shown in the inner region of the burner because mean velocity W is distributed about twice as large as mean velocity V due to inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the mean velocities are largely distributed near the outer region of burner within $X/R{\fallingdotseq}1.5$, hence, the turbulent characteristics are anticipated to be distributed largely in the center of this region due to the large inclination of mean velocity and swirl effect.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.51-60
• /
• 1997

In this paper, we investigated the heating performance and the basic characteristics required for normal combustion of kerosene fan heater. And also the iso-velocity contours and the iso-temperature contours of hot gas discharged from the exit of kerosene fan heater were analyzed. The experiment was carried out with kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of $240mm{\times}240mm{\times}1200mm$. The purpose of this paper was to obtain the basic data for new design from conventional kerosene fan heater. Consequently it was found that (i) the pressure ratio $P_2/P_1$ had a comparatively constant value of 0.844 according to the increase of the revolution of turbo fan, (ii) the primary excess air ratio had a range of $0.84{\sim}1.11$ during normal combustion, and (iii) the heating performance of kerosene fan heater had a range of $1,494{\sim}3,852kcal/hr$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.325-329
• /
• 2017

본 연구에서는 탄화수소 계열 케로신 연료를 적용한 이중모드 램제트 연소기에 대하여 마하수 3.5~6.0 조건에서 연소시험을 수행하였다. 이릍 통해서 격리부, 상부(초음속)연소실 및 하부(아음속)연소실 내부의 온도와 압력분포를 측정하여 연소실 내부의 연소특성을 연구하였다. 마하수 3.5~5.0 까지는 아음속 연소 모드로서 하부 연소실에서 램연소를 확인할 수 있었으며, 마하수 6.0 조건에서는 인젝터에서 분사된 연료가 자연발화하여 상부 연소실에서 초음속 연소가 성공적으로 발생하였음을 확인할 수가 있었다.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.23-29
• /
• 2002

This paper is studied to investigate the effect of slits and swirl vanes on the main flow fields of a gun-type gas burner through X-Y plane and Y-Z plane respectively by using X-probe from hot-wire anemometer system. This experiment was carried out with flow rate $450{\ell}/min$ in respective burner models installed in the test section of a subsonic wind tunnel. The burner models with only slits and only swirl vanes respectively were made by modifying original gun-type gas burner. The fast jet flow spurted from slits played a role such as an air-curtain because it encircled rotational flow by swirl vanes and drives mixed main flow to axial direction. As a result, the gun-type gas burner had a wider flow range up to about Y/R=1.5 deviated from slits and maintains a comparatively large velocity in the central part of burner within the range of about X/R=2.5. Therefore, it was very desirable that swirl vanes were installed within slits in gun-type gas burner in order to control the main flow fields effectively.