• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.377-384
• /
• 2017

The scope of the matrix application is so broad that it can not be limited. A typical matrix application area in computer science is image processing. Particularly, radar scanning equipment implemented on a small embedded system requires real-time matrix transposition for image processing, and since its memory size is small, a general matrix transposition algorithm can not be applied. In this case, matrix transposition must be done in disk space, such as flash disk, using a limited memory buffer. In this paper, we analyze and improve a recently published flash disk-based matrix transposition algorithm named as asymmetric sub-matrix transposition algorithm. The performance analysis shows that the asymmetric sub-matrix transposition algorithm has lower performance than the conventional sub-matrix transposition algorithm, but the improved asymmetric sub-matrix transposition algorithm is superior to the sub-matrix transposition algorithm in 13 of the 16 experimental data.

• Composites Research
• /
• v.35 no.4
• /
• pp.298-302
• /
• 2022

Owing to the superior optoelectronic properties, halide perovskites have emerged as next-generation materials for display application. In this study, we reported a novel route for CsPbBr₃ calcination into porous SiO₂ nanoparticles to overcome the stability issues of halide perovskite via a spatial confinement of crystal growth within SiO₂ pores. The resulting CsPbBr₃-SiO₂ nanoparticles exhibited the photoluminescence (PL) emission peak at 515 nm under optimal calcination condition. In several polar solvents, PL properties of CsPbBr₃-SiO₂ nanoparticles was maintained owing to the enclosed pores during calcination process, suggesting their promising application for display color conversion film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.825-830
• /
• 2014

$[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ ($0{\leq}x{\leq}1$) thin films prepared by metal organic decomposition process were fabricated on SiN/Si substrate for infrared sensor application. Their structural and electrical properties were investigated with variation of Cu dopant. The $[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ (CCNMO) film annealed at $500^{\circ}C$ exhibited a dense microstructure and a homogeneous crystal structure with a cubic spinel phase. Their crystallinity was further enhanced with increasing doped Cu amount. The 120 nm-thick CCNMO (x=0.6) thin film had a low resistivity of $53{\Omega}{\cdot}cm$ at room temperature while the Co-free film (x=1) showed a significantly decreased resistivity of $5.9{\Omega}{\cdot}cm$. Furthermore, the negative temperature coefficient of resistance (NTCR) characteristics were lower than $-2%/^{\circ}C$ for all the specimens with $x{\geq}0.6$. These results imply that the CCNMO ($x{\geq}0.6$) thin films are a good candidate material for infrared sensor application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.13-16
• /
• 2017

In this study, in order to develop composition ceramics for refrigeration device application, $Ba(Ti_{0.9}Zr_{0.1})O_3$ composition was fabricated using conventional solid-state method. Electrocaloric effect of this ceramic was investigated using the characteristics of P-E hysteresis loops at wide temperature range from room temperature to $150^{\circ}C$. Curie temperature of $Ba(Ti_{0.9}Zr_{0.1})O_3$ ceramics showed $80^{\circ}C$. The maximum value of ${\Delta}T=0.12^{\circ}C$ in ambient temperature of $115^{\circ}C$ under 30 kV/cm was appeared. It is concluded that $Ba(Ti_{0.9}Zr_{0.1})O_3$ ceramics can be applied as refrigeration device application.

• Journal of the Korean Ceramic Society
• /
• v.56 no.5
• /
• pp.513-520
• /
• 2019

This study reports the improvement of mechanical properties of Al₂O₃ porous ceramics from colloidal suspension with the addition of carbon fiber by direct foaming. The initial colloidal suspension of Al₂O₃ was partially hydrophobized by surfactant to stabilize wet foam with the addition of carbon fiber from 2 to 8 wt% as stabilizer. The influence of carbon fiber on the air content, bubble size, pore size and pore distribution in terms of wet foam stability and physical properties of porous ceramics were discussed. The viscosity of the colloidal suspension was increased giving solid like properties with the increased in carbon fiber content. The mechanical properties of the sintered porous samples were investigated by Hertzian indentation test. The results show the wet foam stability of more than 90% corresponds to compressive loading of 156.48 N and elastic modulus of 57.44 MPa of sintered sample with 8 wt% of carbon fiber content.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.3
• /
• pp.21-33
• /
• 2021

Rice straw management and winter crop cultivation are crucial components for the accurate estimation of paddy methane emissions. Field-based extensive investigation of paddy organic matter management requires enormous efforts however it becomes more feasible as drone technology advances. The objectives of this study were to identify paddy fields of straw application and winter crop cultivation using drone images and to apply for the estimation of yearly methane emission. Total 35 sites of over 150ha in area were selected nationwide as the study areas. Drone images of the study sites were taken twice during summer and winter in 2018 through 2019: Summer images were used to identify paddy cultivation areas, while winter images for straw and winter crop practices. Drone-image-based identification results were used to estimate paddy methane emission and compared with conventional method. As the result, mean areas for paddy, straw application and winter crop cultivation were 118.9ha, 12.0ha, and 11.3ha, respectively. Overall rice straw application rate were greater in Gyeonggi-do(20%) and Chungcheongnam-do(12%), while winter crop cultivation was greatest in Gyeongsangnam-do(30%) and Jeolla-do(27%). Yearly mean methane emission was estimated to be 226.2kg CH₄/ha/yr in this study and about 32% less when compared to 331.8kg CH₄/ha/yr estimated with the conventional method. This was primarily because of the lower rice straw application rate observed in this study, which was less than quarter the rate of 55.62% used for the conventional method. This indicates the necessity to use more accurate statistics of rice straw application as well as winter crop practices into paddy methane emission estimation. Thus it is recommended to further study to link drone technology with satellite image analysis in order to identify organic management practices at a paddy field level over extensive agricultural area.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.484-497
• /
• 2024

Neonicotinoid pesticides, widely used worldwide as potent insecticides, have been found to have detrimental effects on the environment and living organisms due to their persistent residues. This study aimed to investigate the neonicotinoid pesticides, imidacloprid, and clothianidin, focusing on their impact on honey bee toxicity and foliar residue levels. Alfalfa was selected as control crop while bell peppers, and cucumbers were chosen as representative application crops, respectively. The investigation involved comparing the toxicity and foliar residue levels resulting from soil and foliar treatments, with a focus on identifying potential shortcomings in conventional foliar residue toxicity testing methods. Imidacloprid and clothianidin were applied to crops or soil at recommended rates and through irrigation. The honey bee mortality rate (RT₂₅) over time was determined, and pesticide residues on leaves were quantified using High-Performance Liquid Chromatography (HPLC). The results revealed that foliar treatment with imidacloprid on alfalfa resulted in an RT₂₅ of less than 1 day, with residues ranging from 1.07 to 19.27 mg/kg. In contrast, application on bell peppers showed RT₂₅ within 9 days, with residues ranging from 1.00 to 45.10 mg/kg. Clothianidin foliar treatment displayed RT₂₅ within 10 days on alfalfa, with residues between 0.61 and 2.57 mg/kg. On bell peppers, RT₂₅ was within 28 days, with residues ranging from 0.13 to 2.85 mg/kg. Soil treatment with imidacloprid and clothianidin in alfalfa exhibited minimal impact on honey bees and residues of 0.05 to 0.37 mg/kg. However, in applied crops, imidacloprid showed RT₂₅ within 28 days and residues ranging from 4.47 to 130.43 mg/kg, while clothianidin exhibited RT₂₅ within 35 days and residues between 5.96 and 42.32 mg/kg. In conclusion, when comparing honey bee toxicity and foliar residues among crops, application crops had a more significant impact on honey bee mortality and higher residue levels compared to control crops. Moreover, soil treatment for application crops resulted in higher RT₂₅ and residue levels compared to foliar treatment. Therefore, to ensure pesticide safety and environmental sustainability, diverse research approaches considering different crops and application methods are necessary for the safety assessment of imidacloprid and clothianidin.

• Biomolecules & Therapeutics
• /
• v.28 no.6
• /
• pp.537-541
• /
• 2020

Sphingosine-1-phosphate (S1P) and its receptors have been implicated in atopic dermatitis. S1P₂ was found to function as a proallergic receptor, while its antagonist JTE-013 was found to suppress allergic asthma in mice. Topical application of JTE-013 has not been investigated in an in vivo model of atopic dermatitis. Therefore, the therapeutic potential of JTE-013 topical application was evaluated by the use of a 2,4-dinitrochlorobenzene (DNCB)-induced atopic dermatitis mouse model. DNCB-induced inflammation and mast cell accumulation in skin tissues were significantly suppressed by topical JTE-013 treatment in BALB/c mice. DNCB-induced increase of lymph nodes sizes and elevated inflammatory cytokines (IL-4, IL-13, IL-17, and IFN-γ) in lymph nodes were also significantly reduced by the JTE-013 treatment. Elevated serum levels of IgE were significantly suppressed by the topical treatment of JTE-013. In summary, the topical treatment of JTE-013 S1P₂ antagonist suppressed DNCB-induced atopic dermatitis symptoms and immune responses. These results suggested JTE-013 as a potential therapeutic agent for atopic dermatitis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.114-119
• /
• 2022

The objective of this study was to determine phosphorus effects on drought stress-induced oxidative stress in Kentucky bluegrass. Drought stress was induced by reducing of water to plants in pots. Two types of phosphorus were applied as potassium phosphate (P) or potassium phosphonate (PA). Application of phosphorus was efficient to ameliorate the adverse effects of drought. Osmotic potential, total chlorophyll and carotenoid content were significantly decreased by drought stress, but was relieved by P or PA application. Superoxide (O₂^•-) concentration was significantly increased more than 14-fold under drought-stressed plants, was accompanied with increase of hydrogen peroxide (H₂O₂) and lipid peroxidation (MDA). However, malondialdehyde (MDA) was much less in P or PA applied plants under drought stress condition. Activities of catalase (CAT), ascorbate peroxidase (APX) and guaiacol-peroxidase (GPX) were largely increased by drought stress and its increase rate was much higher in P or PA applied plants except APX. These results indicate that drought stress-induced oxidative stress is alleviated by P or PA application due to the increase of activities of antioxidant enzymes.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.112-123
• /
• 2022

Photosynthetic bacteria (PSB) play an important role in water purification, and their application is beneficial for sustainable aquaculture. However, maintaining the microbial stability of PSB from subculturing to preservation is a challenging task. Since improvement in the microbial stability of PSB is a crucial parameter, optimized conditions for cell immobilization and lyophilization were investigated. In PSB immobilization, 0.1-M CaCl₂ was found to be the most effective divalent metal ion solution in terms of cost-effectiveness, resulting in beads with a 4-mm diameter and high loading (1.91×10⁹ CFU/mL) of viable cells. Maintenance of cell viability, external appearance, and color of PSB beads was best in 3.5% NaCl during storage. In lyophilization, the addition of skim milk (9%) and dextrose (2%) as cryoprotective additives allowed the highest cell viability. Over an 18-week shrimp breeding period, when optimally manufactured beads and lyophilized powder of PSB were applied to shrimp aquaculture water, NH⁴⁺, NO₃^-, and NO₂^- were more effectively removed by 55%, 100%, and 100%, respectively, compared to controls. Thus, microbial stability of PSB through optimized cell immobilization and lyophilization was successfully enhanced, enabling a wide application.