• 환경사랑
• /
• s.50
• /
• pp.12-13
• /
• 2007

• 환경사랑
• /
• s.50
• /
• pp.14-15
• /
• 2007

• 환경사랑
• /
• s.50
• /
• pp.4-5
• /
• 2007

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.710-714
• /
• 1998

Organic electroluminescence devices (ELD) with hetero-junction structure were fabricated utilizing poly(p-phenylne vinylene) (PPV) as emitting layer and electron transport layer (ETL). 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) was used as an electron transport agent. Copolymers with stilbene type comonomers, such as poly(styrene-co-PVTS), poly(styrene-co-MeO-PVTS) and poly(styrene-co-MeO-ST) were synthesized to be used as a matrix polymer to disperse electron transport agent (PBD). Among the hetero-junction EL devices fabricated with the above materials, the device with poly(styrene-co-PVTS) as matrix polymer for ETL gave the highest luminance ($120.7cd/m^2$, 13 V). EL devices made with poly(styrene-co-MeO-PVTS) or poly(styrene-co-MeO-ST) matrix exhibited lower luminance than the one with polystyrene matrix and the single layer EL (ITO/PPV/Mg) device.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1559-1563
• /
• 2011

Thermal hydrogenation of phenylacetylene (PA, $C_8H_6$) to styrene ($C_8H_8$) on pre-$C_xH_y$- and C-covered Cu(111) single crystal substrates has been studied using temperature-programmed desorption (TPD) mass spectrometry. Chemisorbed PA with an acetylene group has been proved to be associated with hydrogen of pre-adsorbed $C_xH_y$ to form styrene (104 amu) on Cu surface. For the parent (PA) mass (102 amu) TPD profile, the TPD peaks at 360 K and 410 K are assigned to chemisorbed vertically aligned PA and flat-lying cross-bridged PA, respectively (J. Phys. Chem. C 2007, 111, 5101). The relative $I_{360K}/I_{410K}$ TPD ratio dramatically increases with increasing pre-adsorbed $C_xH_y$ before dosing PA, while the ratio does not increase for pre-C-covered surface. For PA on pre-$C_xH_y$-covered Cu(111) surface, styrene desorption is enhanced relative to the parent PA desorption, while styrene formation is dramatically quenched on pre-C-covered (lack of adsorbed hydrogen nearby) surface. It appears that only cross-bridged PA associates with adsorbed hydrogen to form styrene that promptly desorbs at 410 K, while vertically aligned PA is less likely to participate in forming styrene.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.394-397
• /
• 2000

Lab-scale biofilter was evaluated for the removal of styrene from a waste gas stream. Compost and polyurethane form were used as packing material (50 : 50) and activated sludge from a wastewater treatment plant was innoculated initially. Nitrogen limitation was observed during the biofilter operation and nitrogen source should be properly supplemented. When ammonium sulfate is used as N-source. 200mg carbon was removed for each mg of nitrogen. The effects of the volumetric styrene loading on the styrene elimination capacity (EC) and the removal efficiency (RE) was also tested. The results showed $EC_{max}$ was 4.8kg $C/m^3{\cdot}day$ and above RE 95% was achieved at EBRT 1min.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.70-76
• /
• 1991

Water soluble poly(sulfonated styrene-co-acrylic acid) was polymerized with sulfonated styrene and acrylic acid in the presence of silver sulfate at $99^{\circ}C$ for 4 hrs. The complex formation of poly(sulfonated styrene-co-acrylic acid) with Cu(II) was carried out. The maximum absorption wavelength of the poly(sulfonated styrene-co-acrylic)-Cu(II) system at different pH values was observed at 274 nm and 295 nm. The reduced viscosity of the poly(sulfonated styrene-co-acrylic acid)-Cu(II) complex were measured in the various pH ranges. The formation constants and stability constants of poly(sulfonated styrene-co-acrylic acid)-Cu(II) complex were calculated from Bjerrum method. The changes of enthalpy, free energy and entropy in the above reaction were determined by Ringbom method.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.8-13
• /
• 2007

To overcome drawbacks of the nylon 6/poly (acrylonitrile-co-butadiene-co-styrene) (ABS) blend, nylon 6 blend with poly (acrylonitrile - co-styrene - co-acrylic rubber) (ASA) which containing poly (butyl acrylate) as a rubber phase in substitute of poly (butadiene) in ABS, was examined. Poly (styrene-co-maleic anhydride) (SMA) containing 25 wt% of maleic anhydride (MA) or poly (styrene- co-acrylo-nitrile-co-maleic anhydride) (SANMA) containing less than 3 wt% MA was used as a compatibilizer to fabricate blends having high impact strength. Changes in the mechanical properties of nylon 6/ASA blend with compatibilizer content were similar with those of nylon 6/ABS blend. Blends haying high impact strength was produced when blends contained more than about 20 wt% rubber. Blends containing SAM or SANMA as a compatibilizer were stayed in a injection molding machine at the molding temperature and afterwards specimens for the examination of the impact strength was prepared. Impact strength of blends containing SMA was decreased with retention time, while that of blends containing SANMA was not changed with retention time.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.1-7
• /
• 1996

Mandelic acid is the major metabolite and phenylglyoxylic acid is the minor metabolite of styrene in human. This study was conducted to investigate the correlation between exposure concentrations of styrene and concentration of the metabolites in urine The concentrations of metabolites in urine and exposure concentrations were measured in 60 workers who were occupationally exposed to styrene in FRP industry as well as paint industry and musical instrument manufacturing industry and the concentrations of metabolites in urine ware measured in 90 workers not occupationally exposed to styrene for review the background level in the unexposed population. The results obtained were as follows; 1. The mean exposure concentration is 16.6 $\pm $12.2 ppm (range 0.4-49.9ppm) in the styrene exposed workers. 2. The concentration of mandelic acid in urine collected at the end of shift from worker exposed 8 hours to 50ppm of styrene, based on extrapolation from correlation equations was 578.5 mg/g creatinine and 176.8 mg/g creatinine for next morning urine, the concentration of phenylglyoxylic acid in urine collected at the end of shift was 291.1 mg/g creatinine, 177.9 mg/g creatinine in next morning urine. In the sum of mandelic acid and phenylglyoxylic acid in the urine 870.2 mg/g creatinine in urine sampled at the end of shift corresponds to an exposure of 50ppm of styrene and 366.0 mg/g creatinine for next morning sample corresponds to 50ppm. 3. The correlation of the degree of exposed with sum concentration of mandeliacid and phenylglyoxylic acid in the urine was better(r=0.079 for end of shift, r=0.78 for next morning) than the correlation with single determinant measurement in urine(r=0.75 for mandelic acid at end of shift, r=0.73 for mandelic acid at next morning, r=0.69 for phenylglyoxylic acid at end of shift, r=0.62 for phenylglyoxylic acid at next morning). The monitoring of sum concentration of mandelic acid and phenylglyoxylic acid in urine is a valuable indicator of time weighted average daily exposure ti styrene. And the exposure standard of urinary metabolites produced by styrene should be set, in distinction urine at the end of shift from urine at next morning.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.765-768
• /
• 2002

Enantioselective hydrolysis of racemic styrene oxide by Rhodotorula sp. CL-82 was investigated. Reaction conditions including pH, temperature, and volume ratio of organic cosolvent were optimized using response surface methodology, and the optimal conditions of pH, temperature, and the volume ratio of cosolvent were determined to be 7.64, $33.26^{\circ}C$, and 3.09 %(v/v), respectively. Chiral (S)-phenyl oxirane could be obtained with high enantiomeric purity (ee ＞ 99%) and 20% yield (theoretical yield ＝ 50%) at the optimal rendition.