• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.665-677
• /
• 2022

Purpose: The purpose of this study is to analyze the current status and investigate relevant indicators so that R&D performance evaluation suitable for government-funded research institutes can proceed. A suitable performance evaluation model was presented based on the surveyed indicators. Based on the presented performance evaluation model, the importance was analyzed to calculate the weight for each indicator of the performance evaluation model. Methods: The method applied in this study presented a performance evaluation model based on the organizational performance evaluation cases of advanced overseas countries. By using the AHP(Analytic Hierarchy Process) technique, the weight of each indicator of the performance evaluation model was studied. Results: As a result of examining the indicators necessary for the evaluation model, focusing on overseas cases, 13 evaluation items were derived. A weight was calculated for the importance of the study results. And the scientific/technical research results showed the highest excellence. Conclusion: Key indicators of performance evaluation suitable for government-funded research institutes were derived and presented through detailed modeling in three stages. A realistic model that can objectively evaluate the performance of government-funded research institutes was proposed using the AHP technique.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1203-1217
• /
• 1994

In the present study, in order to analyze a turbulent flow in a square sectiond 180.deg. bend, Kim's low Reynolds number second moment turbulence closure is adopted. In this model, turbulence model constants in the wall region are modified as functions of turbulent Reynolds number by use of near wall turbulent universal properties based on Laufer's experimental results of Reynolds stress distriburions. Algebraic stress model and Reynolds stress equation model are used to verify the low Reynolds number second moment closure. The application of the present low Reynolds number algebraic stress model to the prediction of a square sectioned 180.deg. bend flow gives improved velocities and Reynolds stresses profiles compared with those obtained by using the van Driest mixing length model and present low Reynolds number Reynolds stress equation model.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.1
• /
• pp.19-26
• /
• 2012

Soils exhibit creep behavior in which deformation and movement proceed under a state of constant stress or load. In this study, A series of triaxial tests were performed under constant principal stress in order to interpret the undrained creep characteristics of silty sands. Although samples are non-plastic silty sands, the results of tests show that the creep deformation increasing over time. Based on the results of test, Singh-Mitchell model parameters and Generalized model coefficients were calculated. Generalized model showed slightly larger deformation in the primary creep range but secondary creep deformation was almost identical. Although Singh-Mitchell model showed relatively large errors compared to Generalized model because it uses the average of test results, but Singh-Mitchell model can be easily represented by three creep parameters.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.198-203
• /
• 1995

The objective of this study is to provide the information on the techniques of manufacturing and experiment in small scale modeling of precast concrete(P.C.)large panel structures. The adopted scale was 1/5th 4types of experiments were performed : material tests for model concrete and model reinforcement, compressive test of horizontal joint, shear test of vertical joint and cyclic static test of 2-story subassemblage structure. Based on the experimental results, the following conclusions are drawn: (1)Model concrete may have in general larger compressive strength than expected. (2) Model reinforcement can show less ductility if the annealing processes were performed without using vaccuum tube. (3) Failure modes of horizontal and vertical joints were almost same for both prototype and model. But the strength of model appears to be higher than required by similitude law. (4)Hysteretic behavior of 1/5 scale subassemblage model can be made quite similar to prototype's if the ductility of model reinforcement and compressive strength of model concrete could be representative of those of prototype.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.92-98
• /
• 2015

This study investigates the durability of a two-passenger bicycle frame under non-uniform fatigue load. The bicycle frame of Model 1 installed with reinforcement support has a 20% lower maximum equivalent stress than the existing Model 2. Model 1 has a maximum total deformation that is less than half that of Model 2. Model 1 has a higher maximum fatigue life than Model 2. In addition, Model 1 has lower fatigue damage than Model 2. Thus, the bicycle frame of Model 1 installed with reinforcement support can be described as safer, as it offers more strength than Model 2. Applying this result to the design of a real two-passenger bicycle frame under non-uniform fatigue load can effectively prevent fatigue damage and improve durability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.12-16
• /
• 2007

A dynamic model of proton exchange membrane fuel cell(PEMFC) system is designed to understand the performance of the PEMFC in residential power generator(RPG) over various balance of plant(BOP) options. In particular, since the performance of PEMFC system should be optimized for given operating ranges, it is necessary to design suitable BDP components which can support the operating ranges. The objective of this study is to develop a dynamic system model for the study of PEMFC performance over various BOP options. Therefore, a dynamic model is composed of a PEMFC stack model, a water management system model, a thermal management system model and a fuel/air supply model and the model is integrated under SIMULINK(R)environment. Basic simulation results will be presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.75-82
• /
• 2007

When one forecasts urban water demand in a long-term, multivariate model can give more benefits than per capita requirement model. However, the former has shortcomings in that statistically high explanatory power cannot be obtained well, and change in customer behavior cannot be considered. If the past water consumption effects the future water demand, dynamic model may describe real water consumption data better than static model, i.e. the existing multivariate model. On these grounds, this study built dynamic model using system dynamics. From a case study in Seoul and Busan city, dynamic model was expected to forecast water demand more descriptively and reliably.

• The Journal of Information Systems
• /
• v.8 no.1
• /
• pp.65-92
• /
• 1999

As the information technology advances and the number of internet users increase, the electronic commerce has been discussed actively in the academic and industrial circles. Though the reference model is important as a guide to the study on electronic commerce at this time, current studies on the reference model are inclined to emphasize on the specified area, not on overall area. In this respect, this paper aims to provide the synthetic reference model - named the ECGR model(Electronic Commerce Generic Reference model) - and its application plans. First, for these purposes, several frameworks and reference models of electronic commerce are compared and analyzed from the various viewpoints. Second, several factors for the development of the reference model are proposed. Finally, the ECGR model is developed and its application plans are suggested. The ECGR model provides a conceptual and analytical apparatus to interpret the profound understanding of electronic commerce and presents the fundamental framework related to the electronic commerce projects. According to the expansion of electronic commerce and the development of related information technology, the ECGR model must be modified.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.180-185
• /
• 2004

The present study investigates the effect of fire growth model on fire development characteristics in a carriage. The parallel processing version of FDS code is used to simulate the fire driven flow in a carriage and two types of fire growth model which are flame spread model and t$^2$ model are examined for the same geometrical condition. The heat release rates(HRR) of both model are similar each other until 30 s after ignition, but the flame spread model predicts 5 times higher than those of the t$^2$ fire model during the quasi-steady fire period. Maximum heat release rate in the case of flame spread model reaches about to 12 MW at 100 s after fire ignition. Also, various database of fire properties for combustible materials and more elaborate combustion model considering the flame spreading phenomena are required for better predictions of fire development characteristics using numerical simulation.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.789-797
• /
• 2006

This study was conducted to establish the refined model for prediction of flocculation/sedimentation efficiency in factual drinking water treatment plants using model tree technique. In order to carry out machine leaning for determining each linear model, five parameters; time, coagulant dose, raw water turbidity, SCD and conductivity, which were measured and collected from the field (K_DWTP), were selected and used. The existing analytical models developed by previous researchers were used only to examine closely the mechanism of flocculation rather than to apply it for practical purpose. The refined model established using model tree technique in this study could predict the factual sedimentation efficiency accurately (below 9% of average absolute error). Also, in aspect of engineering convenience, without any additional manipulation of parameters, it can be applied to practical works.