• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.52-59
• /
• 2002

Resently, reduction of industrial products in size and weight has increased by the application of micro-drill for gadgets of high precision and gave rise to a great interest in a micro-drilling. Due to the lack of tool stiffness and the chip packing, micro-drilling requires not only the robust tool structure which has not affected by the vibration, but also the effective drilling methods designed to prevent tool fracture from cutting troubles. Firstly, this paper presents a optimum characteristic evaluation method of 0.15mm microdrill in consideration of new manufacturing processes for improving the product rate and extend the tool life, and secondly suggest between microdrilling characteristic properties of tool md evaluation of workpiece quality through experiment.

• Archives of Pharmacal Research
• /
• 제2권1호
• /
• pp.17-24
• /
• 1979

A first systematic approach on new and simple preparation method of spherical granules in the system using organic granulating solution was carried out. Mixer granulation required narrow range of moisture content but gentle action of tumbling in the mixer and capilary forces were adequate to compact the porous mass and also were highly effective to produce granules close to sphere. Where the granules by massing and screening provided the more open structure, its pore distribution lied between 71 and 16 .mu.m by above 50% and on the contrary, that of the mixer granulated granules showed only below 25%. Increase in retention time in the mixer decreased the intragranular porosity of granules produced, and in comparison with granular particles produced by conventional wet granulation, those from the mixer granulation had the advantages of flow properties, packing characteristics and definite spherocity. They also had extremely low friability resulting in few fines.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4155-4160
• /
• 2012

We characterized the physisorption of p-iodo-phenyl octadecyl ether molecules (I-POE) onto superlattice regions of graphite surfaces using scanning tunneling microscopy (STM). The formation of self-organized I-POE monolayers does not affect the overall structures of moir$\acute{e}$ patterns and their modulation periods. However, the packing density of the I-POE monolayer and the orientations of lamella structures were sensitive to the underlying superlattice structure. Depending on the bias voltage, the STM images selectively showed moir$\acute{e}$ pattern, I-POE layer, or both. Reflecting the local density of states at a certain energy level, the STM images thereby revealed the relative energy level scale of the superlattice with respect to the molecular orbitals of I-POE.

• 한국세라믹학회지
• /
• 제37권11호
• /
• pp.1078-1083
• /
• 2000

정전안정화 및 입체안정화를 동시에 적용한 복합안정화기구에 의하여 25 부피%의 나노 $Al_2$O$_3$슬러리를 제조하고, 이로부터 얻은 주입성형체, 원심성형체, 진공성형체의 기공구조 분석을 통하여 입자충전거동을 살펴보았다. 나노 알루미나 분말의 습식 성형체의 충전구조는 성형방법에 의하여 가해지는 외력의 영향을 크게 받지만, 반발력을 제공하는 표면장벽층의 상호작용에 의해서도 현저한 차이를 보이는 것으로 나타났다. 예비소결실험을 통하여 나노분말에서도 기공크기가 작고, 크기분포가 좁으며, 높은 밀도를 가진 균일성형체의 미세구조가 소결미세구조를 균일하게 하는데 필수적인 조건임을 확인하였다.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.872-878
• /
• 2000

In this paper a computer programming for the expression of nearest neighbor atoms in face-centered cubic (FCC) and body-centered cubic (BCC) crystals was suggested as one of the approaches to understand each of the crystal structure. By using this computer programming the distance values between a reference atom and the nearest neighbor atoms, and the numbers of the nearest neighbor atoms were calculated ane compared for the FCC and BCC crystals. In this algorithm, the positions of the atoms in a crystal were defined as two categories: the corner atoms and face- or body-centered atoms, and considered respectively. For the same order of nearest neighbor atoms except the second order ones the distance values form the reference atom were smaller in the FCC crystals than those in the BCC. Also, the numbers of he first and third nearest neighbor atoms n the FCC crystals were larger than those in the BCC. This difference was explained by the comparison of each atomic packing ratio of the FCC and BCC crystals. The algorithm used in this programming can also be expanded to the analysis of other crystal structures.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.525-529
• /
• 1991

A simple route is described for the selective functionalization of calixarene at the para positions of phenyl rings. Calix[4]arene tetraacetate 2, obtained from the treatment of calix[4]arene with acetic anhydride, undergoes Fries rearrangement to yield the diametrically para substituted p-diacetylcalix[4]arene 3 in 80% yield. The crystal and molecular strucutre has been determined by X-ray diffraction method. The crystals are orthorhombic, space group Pna21, with a = 11.121 (3), b = 10.374 (3), c = 21.690 (6) $\AA$ and Z = 4. The structure was solved by direct method and refined by full-matrix least-squares methods to final R of 0.036 for 1795 observed reflections. Each hydroxyl hydrogen atom is disordered over two positions. The macrocycle exists in the cone conformation which is determined by the strong circular intramolecular flip-flop type hydrogen bonds of phenolic OH, while crystal packing effects of the diametrically para-acetyl substituents seem to be responsible for the distortion of the cone conformation.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• 제26권2호
• /
• pp.119-129
• /
• 2024

Knowledge of the venous anatomy is essential for appropriately treating dural arteriovenous fistulas (AVFs). It is challenging to determine the overall venous structure despite performing selective angiography for dural AVFs with feeder from multiple selected arteries. This is because only a part of the veins can be observed through the shunt in the selected artery. Therefore, after performing selective angiography of all vessels to understand the approximate venous anatomy, the venous anatomy can be easily understood by closely examining the source image of computed tomographic angiography or magnetic resonance angiography. Through this, it is possible to specify the vein that is to be blocked (target embolization), thereby avoiding extensive blocking of the vein and avoiding various complications. In the case of dural AVF with feeder from single selected artery, if the multiplanar reconstruction image of the three-dimensional rotational computed tomography obtained by performing angiography is analyzed thoroughly, a shunted pouch can be identified. If embolization is performed by targeting this area, unnecessary sinus total packing can be avoided.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.110-113
• /
• 2002

We demonstrate here a dynamic structure of bacteriorhodopsin (bR) as revealed by $^{13}$ C NMR studies on [3_$^{13}$ C]_,[1-$^{13}$ C]Ala- and/or Val-labeled wild type and a variety of site-directed mutants at ambient temperature. For this purpose, well-resolved (up to twelve) I$^{13}$ C NMR peaks were assigned with reference to the displacement of peaks due to the conformation-dependent I$^{13}$ C chemical shifts and reduced peak-intensities due to site-directed mutations. Revealed bR structure was not rigid as anticipated from 2D crystals of hexagonal array but a dynamically heterogeneous, undergoing a variety of local fluctuations depending upon specific site with frequency range of 10$^2$ -10$^{8}$ Hz. In particular, dynamics- dependent suppression of peaks turned out to be very sensitive to the motion of 10$^{-4}$ s and 10$^{-5}$ s interfered with frequency of magic angle spinning and proton decoupling, respectively. It is also noteworthy that such dynamic feature is strongly dependent upon the manner of 2D crystalline packing: $^{13}$ C NMR peaks of monomeric bR yielded either highly broadened or completely suppressed signals, depending upon the type of $^{13}$ C-labeled amino-acid residues.

• 대한두개안면성형외과학회지
• /
• 제12권2호
• /
• pp.93-96
• /
• 2011

Purpose: In most cases of nasal bone fracture, closed reduction with internal or external splint fixation approach is selected. However, because of indiscriminate insertion of the internal splint without considering of anatomical difference or deformity, insufficient fixation happens frequently that need additional fixation. Therefore, we suggest a new method for providing adequate support in reduced nasal bone by carving $Merocel^{(R)}$ that is fixed for the anatomical structure. Method: Closed reduction and internal fixation with carved $Merocel^{(R)}$ was performed in 15 nasal bone fracture patients from March, 2010 to July, 2010. Each patient was evaluated by physical examination, facial photographic check, simple X-ray, and computerized tomography. On the first day post-operation, location of packing and amount of reduction were checked by follow up X-ray and computerized tomography. In addition, patients' symptoms were evaluated. During the 3-month post-op follow up at out-patient clinic, operator, 2 doctors in training and one assistant performed the objective evaluations by physical examination on nasal dorsal hump, nasal deviation, nasal depression, nasal breath difficulty, and nasal airway obstruction. A survey of subjective patients' satisfaction in 4-stages was also performed. Results: The results of follow-up computerized tomography of the 15 patients revealed that 11 patients had good reduced state. Three patients with combined maxillary frontal process fracture had over reductions. A survey performed on the first day post-operation showed that 14 of 15 patients answered that their current symptoms were more than tolerable. At the 3-month follow-up physical exam, one case had a dorsal hump. However, there were no nasal deviations, nasal depressions, nasal breath difficulties, or nasal airway obstructions. Twelve of the 15 patients answered more than moderate on the 3-month survey. Conclusion: Intranasal packing after carving the $Merocel^{(R)}$ considering anatomical structure is a new effective method to promote proper-reduction, maintain stability, and minimize patients' symptoms by addition of a simple procedure.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1253-1257
• /
• 2011

The surface structures, adsorption conditions, and thermal desorption behaviors of cyclopentanethiol (CPT) self-assembled monolayers (SAMs) on Au(111) were investigated by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). STM imaging revealed that although the adsorption of CPT on Au(111) at room temperature generates disordered SAMs, CPT molecules at $50^{\circ}C$ formed well-ordered SAMs with a $(2{\surd}3{\times}{\surd}5)R41^{\circ}$ packing structure. XPS measurements showed that CPT SAMs at room temperature were formed via chemical reactions between the sulfur atoms and gold surfaces. TDS measurements showed two dominant TD peaks for the decomposed fragments ($C_5H_9^+$, m/e = 69) generated via C-S bond cleavage and the parent molecular species ($C_5H_9SH^+$, m/e = 102) derived from a recombination of the chemisorbed thiolates and hydrogen atoms near 440 K. Interestingly, dimerization of sulfur atoms in n-alkanethiol SAMs usually occurs during thermal desorption and the same reaction did not happen for CPT SAMs, which may be due to the steric hindrance of cyclic rings of the CPT molecules. In this study, we demonstrated that the alicyclic ring of organic thiols strongly affected the surface structure and thermal desorption behavior of SAMs, thus providing a good method for controlling chemical and physical properties of organic thiol SAMs.