• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.38-47
• /
• 2007

The initiation of fatigue cracks in a simulated aircraft structure with a series of rivet holes was detected by acoustic emission(AE), then the crack length was determined by surface acoustic wave(SAW) technique. With the initiation and growth of fatigue cracks, AE events increased intermittently to form a stepwise incremental curve of cumulative AE events whereas the crack length increased more or less monotonically. With the SAW technique employed, the crack sizing for 13 different cracks including some short cracks was performed. With the reference to the measurement by traveling microscope, cracks in the range of $1{\sim}8mm$ long were reliably sized by the SAW technique. Although it was impossible to size the short fatigue cracks in the range shorter than 1 mm, the SAW technique still appeared practically useful for a range of crack lengths often found in aircraft structures.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.368-374
• /
• 2016

This paper presents constructing transmitter and receiver by using a direct sequence spread spectrum techniques to DPSK (Differential Phase-Shift Keying) scheme in underwater acoustic communication. Since DPSK signal can be demodulated if the receiver knows only the phase difference between the adjacent bits, DPSK receiver structure has the advantage of being simplified. In the conventional receiver, two adjacent symbols of transmitted signal before despread are passed to the transition correlator that detects data by comparing maximum correlation outputs. At this time, the error for maximum value of the correlator output may increase because of low SNR (Signal to Noise Ratio) or high Doppler shift frequency according to the underwater channel. In this paper, we propose a method for accurate detection result using the width as well as the magnitude among outputs produced by the correlator. The performances of the proposed method was evaluated by simulation and lake trial data.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.20-30
• /
• 2007

Environmental Conservation Value Assessment Map (ECVAM) is the class map to divide the national land into conservation areas and development areas based on legal and ecological assessment criteria. It contributes to enhancements of the efficiency and the scientificity when framing a policy in various fields including the environment. However, it is impossible to understand the multiphase vegetation structure as data on judging the national forest class in ECVAM are restricted to areal information of Ecological Nature Status, Degree of Green Naturality and Forest Map. This point drops the reliability of ECVAM. Therefore we constructed vegetation information using LiDAR (Light Detection And Raging) technology. We generated Biomass Class Maps as final results of this study, to introduce the new forest assessment criterion in ECVAM that alternates or makes up for existing forest assessment criteria. And then, we compared these with Forest Map and Landsat TM NDVI image. As a result, biomass classes are generally higher than stand age classes and DBH classes of Vegetation Map, and lower than NDVI of Landsat TM image because of the difference of time on data construction. However distributions between these classes are mostly similar. Therefore we estimates that it is possible to apply the biomass item to the new forest assessment criterion of ECVAM. The introduction of the biomass in ECVAM makes it useful to detect the vegetation succession, to adjust the class of the changed zone since the production of Vegetation Map and to rectify the class error of Vegetation Map because variations on tree heights, forest area, gaps between trees, vegetation vitality and so on are acquired as interim findings in process of computing biomass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.191-191
• /
• 1999

Extended X-ray Absorption Fine Structure (EXAFS)는 일반적으로 널리 사용하는 X선 회절분광기로 분석하기 힘든 chemical 또는 biological system의 structural analyses에 매우 유용한 분석방법이다. 특히 세라믹이나 유전체 비정질 재료의 미세 원자 구조에 관한 정보를 얻는데는 가장 강력한 분석방법중의 하나로 알려져 있다. 현재까지 대부분의 EXAFS 실험은 방사광 가속기를 이용하여 수행하였다. 그런데 신제품 개발의 순환주기가 급속하게 단축되는 현실적인 문제에 부응하기 위하여 실험실에서 EXAFS 실험을 수행할 수 있는 system을 개발하게 되었다. 개발한 XIEES 장비는 rotating anode 형의 18kW X-ray source, Optical system, Detection system, Stepping motor control system, vacuum system, Utility 등으로 구성하였다. Optical system에서의 6개의 Johanson type monochromator를 사용하여 분석가능한 x-ray energy range를 480eV에서 41keV까지 구현하였다. 이는 산소에서 우라늄까지 분석이 가능함을 의미하는 것으로, 산화물 연구에 많이 활용할 것으로 기대한다. XIEES는 투과 및 형광 X-ray를 검출할 수 있는 기능과 X-ray에 의해 여기 되는 모든(광전자, Aiger 전자, 이차전자)들을 검출할 수 있는 기능을 갖추고 있는데 이를 Total Electron Yield 측정이라고 한다. Total Electron Yield 측정은 박막 시료와 같이 투과가 되지 않는 시료를 분석할 뿐만 아니라, 경원소 분석, 낮은 에너지에서 흡수 edge가 나타나는 L-edge 측정을 통한 전자 구조 분석 등에 유용한다. 실험실용 XIEES 장비는 방사광가속기에 비해 x-ray flux가 크게 뒤지는 문제와 Total Electron Yield를 측정하는 데 있어서 source에서 나오는 x-ray beam이 진공용기 안에서 산란되어 이차전자를 여기하고 이 이차전자들이 전자검출기에 유입되어 측정에 영향을 미치는 background 문제 등이 있다. 이 두 가지 문제를 해결하기 위하여 Capillary tube를 사용하였다. 본 연구에서는 실험실용 XIEES 장비를 소개하고 이를 이용하여 Cu standard 시료에서 측정한 EXAFS 결과와 Capillary tube를 사용하여 얻은 x-ray flux 증진 및 background 제거 효과에 대해서 발표한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.2
• /
• pp.56-63
• /
• 2003

We investigate some implementation factors that affect the performance of multi-rate parallel interference cancellers (PICs) for the international mobile telecommunications-2000 (IMT-2000) 3rd-generation partnership project (3GPP) system. We consider the simple multi-rate PIC [1,2] that can remove effectively multiple access interference (MAI) through block-based detection and sample-based cancellation in asynchronous user environments. The PIC structure has significantly lower complexity as compared with that of the existing scheme, especially as the number of users increases. We analyze the effects of timing error, oversampling rate, unsynchronized users and/or outer-cell interference, and the number of Quantization bits on the PIE performance through extensive computer simulations. The models for such factors and the optimum parameters are drawn. Finally, we evaluate the receiver complexities of the PIC receivers employing using the advanced removal scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.25-32
• /
• 2006

We propose a new M-ary state-transition FSK modulator technique for enhancing demodulator's symbol timing recovery which can be applied to acoustic MODEM. In the previous technique, the demodulator's symbol timing performance can degrade when the sequences of same symbols are transmitted. This proposed method, because the transmission symbol changes in every single symbol period, increases the synchronization performance dramatically and has a simple MODEM and frame structure. On the one hand, we improve modulation-derived synchronization(MDS) which is M-ary FSK's symbol timing recovery scheme, then analyze it. Finally the proposed method is analyzed from the viewpoint of frequency efficiency, which proves this method is appropriate for acoustic MODEM.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.41-50
• /
• 2010

In this paper, an area-efficient symbol detector is proposed for MIMO communication systems with two transmit and two receive antennas. The proposed symbol detector can support both the spatial multiplexing mode and spatial diversity mode for MIMO transmission technique, and shows the optimal maximum likelihood (ML) performance. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate，the complexity of the proposed architecture is dramatically decreased. The proposed symbol detector was designed in hardware description language (HDL) and implemented with Xilinx Virtex-5 FPGA. With the proposed architecture, the number of logic slices for the proposed symbol detection is 52490 and the number of DSP48s (dedicated multiplier) is 52, which are reduced by 35.3% and 85.3%, respectively, compared with the conventional architecture.

• Convergence Security Journal
• /
• v.17 no.4
• /
• pp.11-16
• /
• 2017

MANET composed of only mobile node is applied to various environments because of its advantage which can construct network quickly in emergency situation. However, many routing vulnerabilities are exposed due to the dynamic topology and link failures by the movement of nodes. It can significantly degrade network performance. In this paper, we propose a secure routing protocol based on trust model. The domain-based network structure is used for efficient trust evaluation and management of nodes in the proposed technique. The reliability evaluation of nodes was performed by the discard ratio of control packet and data packet of the nodes. The abnormal nodes are detected by performing traffic check and inspecting of nodes on a path that generates excessive traffic in order to increase the efficiency of routing. It is confirmed through experiments of the proposed technique that data transmission is performed securely even if an attack exists on the path.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1085-1086
• /
• 2008

Shunt active filter can compensate harmonic current of utility results from non-linear loads such as rectifiers, cycloconverters and arc furnaces. It has the same structure as photovoltaic(PV) generation system. So, It was proposed the system that generates PV power and also has active filter function. It is called PV-AF(Photovoltaic and Active Filter) power generation system. Islanding can be occurred in an inverter based dispersed generation system, when the system disconnected from utility and loads are entirely supplied by PV system only. Islanding may result in interference to grid protection devices, equipment damage, and even personnel safety hazards. Therefore, islanding has to be detected and protected. The conventional anti-islanding methods have NDZ(None-Detection Zone) or power quality degradation. But PV-AF power generation system has the function of not only shunt active filter but also anti-islanding method without NDZ. In this paper, a novel anti-islanding method for PV-AF system is proposed and analysed in detail.

• Women's Health Nursing
• /
• v.17 no.2
• /
• pp.157-168
• /
• 2011

Purpose: This study was done to examine differences in mammography screening according to breast cancer and social network characteristic. Methods: Data were collected from 187 married women 35 years and older who were using public health centers, health promotion centers, cultural centers, obstetrics and gynecology hospitals or other relevant community sites. Data were collected between October 24 and December 4, 2008. Data were analyzed using the SPSS/WIN 15.0 program. Results: The participation rate for mammography screening was 35.3%. The following general and breast cancer characteristics showed statistically significant differences: religion, family incomes, regular medical-care, general health examinations during past 2 years, and history of breast disease. The following social network characteristics showed statistically significant differences: social norms and subjective norms. Using logistic regression analysis, regular medical-care, breast cancer risk appraisal, social norm, and subjective norms were highly predictive of subsequent mammography. Conclusion: The results of this study indicate that it is important to develop and provide tailored intervention programs through integrated socially mediated programs. By consciously including social network and support systems, breast cancer detection efforts would not end as a one-time event, but naturally build on network structure of adults women, thus facilitating regular mammography screening.