유한요소법(有限要素法)을 이용(利用)하여 선체(船體) corner부(部)의 구조(構造) 해석(解析)을 하기 위해서는 많은 mesh로 분할(分割)해야 하기 때문에 해석(解析) 시간(時間) 및 작업(作業) 시간(時間)이 막대(莫大)하게 소요(所要)되므로 최적(最適) 설계(設計)로 확장(擴張)하기 위해서는 유한요소법(有限要素法)의 비효율성(非效率性)을 배제(排除)하고 계산(計算) 시간(時間)이 적게 소요(所要)되는 새로운 해석방법(解析方法)의 개발(開發)이 절실(切實)하다. 지금까지 corner부(部)의 구조(構造) 해석(解析)을 하기 위한 이론적(理論的) 방법(方法)으로 등가(等價)의 곡선(曲線)보 이론(理論) 및 wedge 이론(理論)이 사용(使用)되어 왔으나 선체(船體)와 같이 비대칭(非對稱) 하중(荷重) 및 비대칭(非對稱) 구조(構造)를 갖는 구조물(構造物)에 대해서는 잘 맞지 않은 경향(傾向)이 있어 사용(使用)되고 있지 않는 실정(實情)이다. 본(本) 연구(硏究)에서는 이러한 점을 극복(克服)하기 위해 기존(旣存)의 등가(等價)의 곡선(曲線)보 이론(理論)에 비대칭(非對稱) 분포(分布) 하중(荷重)을 고려(考慮)하여 평형(平衡) 상태(狀態)에서 등가(等價)의 하중(荷重)이 되도록하고 비대칭(非對稱) 구조(構造)에 대해서도 대칭(對稱) 구조물(構造物)의 중첩(重疊)에 의해 등가(等價)의 강성(剛性)을 갖도록 치환(置換)하여 어떠한 하중(荷重) 및 구조물(構造物)이라도 응력(應力)을 근사(近似)하게 표현(表現)할 수 있는 신(新) 등가(等價) 곡선(曲線)보 이론(理論)을 정립(定立)하였으며 2부재(部材) 결합부(結合部) 및 3부재(部材) 결합부(結合部)에 대해 구조(構造) 해석(解析)을 수행(遂行)하고 membrane 요소(要素)를 사용(使用)한 유한요소법(有限要素法)의 결과(結果)와 비교(比較)하여 그 유용성(有用性을) 입증(立證)하였다.
일반적으로 체적형 방식의 디스플레이에는 큐브-모서리 재귀반사(corner cube retroreflector, CCRR)시트와 반투과 거울판이 사용되며, 이는 광원의 빛을 재귀반사시켜 부양영상(floating image)을 만든다. 이러한 기존 CCRR 방식은 광원의 강도를 1/4로 줄이는 반투막 투과 2회의 광손실과 각 단위 CCRR 크기에 의한 영상의 퍼짐 현상이 있다. 본 연구진이 제안하는 '혼성-병풍형' 구조 재귀반사(hybrid-t(transverse directional)-RRMA)는 광퍼짐을 최소화하여 부양영상의 품질을 향상시킬 뿐만 아니라, 광도를 4배로 높이며, 제작상의 편리함도 제공한다. '선형 v자 홈' (linear v-shaped groove)을 '포물선 v자 홈' (parabolic v-shaped groove)모양으로 조절한 재귀반사로 영상의 퍼짐을 개선하여 부양영상을 최적화하였고, '평면(flat wall) 재귀반사' 대신 '곡면(curved planar wall)-재귀반사' 구조를 적용한 '곡면-병풍형-재귀반사판'을 사용하여 반투과 거울판을 없애 반투막에 의한 광손실을 개선하고, 시스템을 단순화하였다.
A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.
겨울철인 1998년 2월과 1999년 1월, 4월에 남해와 동중국해 북부해역에서 형성되는 전선의 분포와 구조를 파악하기 위하여 광역의 종합해양관측을 수행하였다. 관측해역에서 구분된 수계들은 대마난류기원 고온수, 황해냉수(북부냉수 혹은 중앙냉수) 그리고 남해저온수로 분류된다. 황해남부 해역에서는 제주도 서쪽을 우회하여 제주해협으로 유입하는 대마난류기원 고온수가 '┍'자 형태의 기본적 전선을 이루며 대흑산도 남쪽에 황해중앙냉수와 그리고 양자천퇴 동부에서 황해북부냉수와 만나고 있다. 이 전선은 고온수가 황해 북서부로 확장하는 세기에 의해 전선 모서리 형태와 위치가 달라진다. 양자천퇴 부근과 한반도 남서단 외측에서의 전선위치와 구조도 관측시기에 따라 변화한다 남해 전선에서는 연안 저온수가 국지적 냉각에 의해 독립적으로 형성된 수계로서 해저사면을 따라 침강한다. 이러한 겨울철 전선분포의 변화와 전선구조가 변화되는 과정은 탁월풍에 의한 순풍류 및 역풍류, 해수면을 통한 열수지 그리고 전선사이의 밀도차이에 의한 것으로 설명되었다.
BNKT Ceramics, one of the representative Pb free based piezoelectric ceramics, constitutes a perovskite(ABO3) structure. At this time, the perovskite structure (ABO3) is in the form where the corners of the octahedrons are connected, and in the unit cell, two ions, A and B, are cations, A ion is located at the body center, B ion is located at each corner, and an anion O is located at the center of each side. Since Bi, Na, and K sources constituting the A site are highly volatile at a sintering temperature of 1100℃ or higher, it is difficult to maintain uniformity of the composition. In order to solve this problem, there should be suppression of volatilization of the A site material or additional compensation of the volatilized. In this study, the basic composition of BNKT Ceramics was set to Bi0.5(Na0.78K0.22)0.5TiO3 (= BNKT), and volatile site (Bi, Na, and K sources) were coated in the form of a shell to compensate additionally for the A site ions. In addition, the physical and electrical properties of BNKT and its coated with shell additives(= @BNK) were compared and analyzed, respectively. As a result of analyzing the crystal structure through XRD, both BNKT(Core) and @BNK(Shell) had perovskite phases, and the crystallinity was almost similar. Although the Curie temperature of the two sintered bodies was almost the same (TC = 290 ~ 300 ℃), it was confirmed that the d33 (piezoelectric coefficient) and Pr (residual polarization) values were different. The experimental results indicated that the additional compensation for a shell additive causes the coarsening, resulting in a decrease in sintering density and Pr(remanent polarization). However, coating shell additives to compensate for A site ion is an effective way to suppress volatilization. Based on these experimental results, it would be the biggest advantage to develop an eco-friendly material (Lead-free) that replaced lead (Pb), which is harmful to the human body. This lead-free piezoelectric material can be applied to a biomedical device or products(ex. earphones (hearing aids), heart rate monitors, ultrasonic vibrators, etc.) and skin beauty improvement products (mask packs for whitening and wrinkle improvement).
Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.
국부적인 결정구조와 에너지 띠 간격 간 상관관계를 고찰하기 위하여 Nb를 포함하는 일련의 불소 산화물에 대하여 결정구조와 자외선-가시광선 확산 반사율 스펙트럼을 비교, 연구하였다. 이 실험에서 다룬 RbSrNb2O6F와 RbCaNb2O6F, RbNb2O5F는 공통적으로, 꼭지점 공유를 하고 있는 NbO5F 팔면체로 구성되어 있 다. 구조적 뒤틀림 정도의 척도로 볼 수 있는 Nb-O(F)-Nb 평균 결합각은 RbSrNb2O6F에서 158.6°, RbCaNb2O6F 에서 149.6° 그리고 RbNb2O5F에서 139.5o이다. 확산 반사율 스펙트럼으로부터 구한 에너지 띠 간격은 Nb-O(F)-Nb 결합각이 감소할수록 증가하는 경향을 보였다. 즉 RbSrNb2O6F, RbCaNb2O6F, RbNb2O5F 각각의 화합물에 대해 서 3.48 eV, 3.75 eV, 4.03 eV 의 값을 나타내었다. 이러한 실험적 결과는 Nb를 포함하는 불소 산화물에서 국 부구조의 변화를 통해 띠 간격을 약 0.6 eV의 범위에서 조절할 수 있음을 의미한다.
본 논문에서는 격리도를 높이기 위한 디커플링 구조를 사용하지 않는 2.4 GHz (2.4 ~ 2.484 GHz) 및 5 GHz (5.15 ~ 5.825 GHz) WLAN용 MIMO (multiple-input-multiple-output) 안테나를 새롭게 제안하였다. 제안된 안테나는 PCB 좌측 및 우측 모서리에 위치하면서 양 끝이 개방된 두 개의 L-형 슬롯에 의해 부유된(floating) 접지면에 에칭된 두 개의 n-형 슬롯으로 구성된다. 제안된 안테나는 크기가 $50{\times}50mm^2$이고 두께가 1.6 mm, 유전율 4.3인 FR4 기판의 한쪽 면에서 설계 및 제작되었다. 제작된 안테나의 측정결과, 임피던스 대역폭 ($S_{11}{\leq}-10dB$)이 2.4 GHz 대역에서는 0.3 GHz (2.28 ~ 2.58 GHz), 5 GHz 대역에서는 0.89 GHz (5.11 ~ 6 GHz) 인 대역폭을 얻을 수 있었다. 또한 안테나의 전체 효율은 동작 주파수 전대역에서 80% 이상이며, 디커플링 구조를 사용하지 않았음에도 불구하고 상관계수는 0.05 이하의 매우 작은 값을 가진다.
본 논문은 새로운 캐비티 공진기 구조를 이용한 반고체 상태 물질의 복소 비유전율 측정 방법을 제안하고 있다. 윗면에 개구면이 존재하고, Ground 판이 분리되어 있는 구조를 이용하여 반고체 상태 물질도 캐비티 내부에 위치할 수 있도록 했다. 공진주파수의 변화와 Critical-Points Method를 이용해 실험적으로 증류수와 0.9 % 식염수의 복소 비유전율을 측정하였으며, 측정값을 Cole-Cole Equation을 통해 이론값과 비교했다.
In order to investigate the flows with shock wave in branch, 108$^{\circ}$ elbow and T-junction of the IRWST system of standard Korean nuclear reactor, detail time dependent behaviors of unsteady flow with shock wave, vortex and so on are obtained by numerical method using compressible three-dimensional Navier-Stokes equations. At first, the complex flow including the incident and reflected shock waves, vortex and expansion waves which are generated at the corner of T-junction is calculated by the commercial code of FLUENT6 and is compared with the experimental result to obtain the validation of numerical method. Then the flow fields in above mentioned units are analyzed by numerical method of [mite volume method. In numerical analysis, the distributions of flow properties with the moving of shock wave and the forces acting on the wall of each unit which can be used to calculate the size of supporting structure in future are calculated specially. It is found that the initial shock wave of normal type is re-established its type from an oblique one having the same strength of the initial shock wave at the 4 times hydraulic diameters of downstream from the branch point of each unit. Finally, it is turned out that the maximum force acting on the pipe wall becomes in order of the T-junction, 108$^{\circ}$ elbow and branch in magnitude, respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.