• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.21-28
• /
• 2004

When femtosecond laser pulses are focused inside the bulk of transparent materials, the intensity in the focal volume becomes high enough to produce permanent structural modifications. This technique has been applied to fabricate three-dimensional photonic structures such as optical memory, waveguides, gratings, and couplers inside a wide variety of transparent materials. In this paper, we review the fabrication of optical elements in glasses with femtosecond laser pulses, including the fabrication of waveguides, couplers, Bragg gratings, zone plates, holographic memory, and micro holes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.123-130
• /
• 2001

The purpose of this study is to suggest the non-destructive equation for the estimation of concrete strength by ultrasonic pulse velocity at the Age of 28day compressive strength of $600{\sim}1000kg/cm^2$. For this purpose, selected test variables were water-hinder ratio, replacement ratio of silica fume, binder content, maximum size of coarse aggregate and sand-aggregate ratio. From the results, the average increase or decrease of ultrasonic pulse velocity is 61m/sec for each 1% of moisture content. And the correlation equation between the ultrasonic pulse velocity and the compressive strength of concrete is as follows. $F_c=896.3V_p-3514$ ($R^2$ = 0.81) where, $F_c$ : compressive strength($kgf/cm^2$), $V_p$ : ultrasonic velocity(km/sec).

• Computers and Concrete
• /
• 제23권6호
• /
• pp.399-408
• /
• 2019

Structural health monitoring is important for the safety of lives and asset management. In this study, numerical models were developed for the piezoresistive behavior of smart concrete based on finite element (FE) method. Finite element models were calibrated with experimental data collected from compression test. The compression test was performed on smart concrete cube specimens with 75 mm dimensions. Smart concrete was made of cement CEM II 42.5 R, silica fume, fine and coarse crushed limestone aggregates, brass fibers and plasticizer. During the compression test, electrical resistance change and compressive strain measurements were conducted simultaneously. Smart concrete had a strong linear relationship between strain and electrical resistance change due to its piezoresistive function. The piezoresistivity of the smart concrete was modeled by FE method. Twenty-noded solid brick elements were used to model the smart concrete specimens in the finite element platform of Ansys. The numerical results were determined for strain induced resistivity change. The electrical resistivity of simulated smart concrete decreased with applied strain, as found in experimental investigation. The numerical findings are in good agreement with the experimental results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.167-170
• /
• 1994

To reduce the size of structural members, high strength concrete has recently been utilized for structure such as ultra-high-rise buildings and prestressed concrete bridges in North America, and its compressive strength has gone up to 1300kg/$\textrm{cm}^2$. In Japan, research on high-strength concrete has been undertaken on a large scale by the national enterprise so-called New RC Project. And high-strength concrete with a design compressive strength over 450kg/$\textrm{cm}^2$ has recently been employed for high rised reinforced concrete building. As a result of the serious land availability situation of metropolitan areas in the world, buildings will become taller, and even higher strengths will be required. In the future, the utilization of high-strength concrete will spread widely through the development of new structural concepts, application of steels of a higher yield stress, silica fume, and other new materials. Considering these circumstance, the aim of this experimental study is to develop ultra-high-strength concrete with compressive strength over 1800kg/$\textrm{cm}^2$ with domestic current materials. There are so many factors which influence the manufacturing of ultra-high-strength concrete. The experimental factors selected in this study are mixing methods, curing methods, water-binder ratio, maximum size of coarse by silica fume. The results of this experimental study show that it is possible to develop the ultra-high-strength concrete with compressive strength over 1700kg/$\textrm{cm}^2$ at 28days, 1800kg/$\textrm{cm}^2$ at 56 days.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.171-174
• /
• 1994

To reduce the size of structural members, high strength concrete has recently been utilized for structure such as ultra-high-rise buildings and prestressed concrete bridges in North America, and its compressive strength has gone up to 1300kg/$\textrm{cm}^2$. In Japan, research on high-strength concrete has been undertaken on a large scale by the national enterprise so-called New RC Project. And high-strength concrete with a design compressive strength over 450kg/$\textrm{cm}^2$ has recently been employed for high rised reinforced concrete building. As a result of the serious land availability situation of metropolitan areas in the world, buildings will become taller, and even higher strengths will be required. In the future, the utilization of high-strength concrete will spread widely through the development of new structural concepts, application of steels of a higher yield stress, silica fume, and other new materials. Considering these circumstance, the aim of this experimental study is to develop ultra-high-strength concrete with compressive strength over 1800kg/$\textrm{cm}^2$ with domestic current materials. There are so many factors which influence the manufacturing of ultra-high-strength concrete. The experimental factors selected in this study are mixing methods, curing methods, water-binder ratio, maximum size of coarse by silica fume. The results of this experimental study show that it is possible to develop the ultra-high-strength concrete with compressive strength over 1700kg/$\textrm{cm}^2$ at 28days, 1800kg/$\textrm{cm}^2$ at 56 days.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.47-54
• /
• 2018

콘크리트는 장기간 사용환경에 노출되면서 다양한 표면열화과정을 거친다. 실리케이트 기반 함침제는 콘크리트 표면에 적용되어 불용성 수화물을 형성하는데, 이 과정에서 다양한 공학적 장점을 기대할 수 있다. 본 연구는 분산형 실리케이트를 사용하여 표면의 내구성능을 강화하고 이후 광촉매를 분무함으로서 표면 함침된 콘크리트의 자기정화능력을 평가하는 것이다. 이를 위해 실리케이트 함침 콘크리트에 대하여 압축강도 뿐 아니라, 흡수성, 건조 수축, 염소이온저항성, 황산저항성, 동결융해 저항성 등과 같은 내구성 실험이 수행되었다. 또한 아세트 알데이드 및 메틸렌블루 반응 평가를 통하여 독성카스의 제거와 자기정화성능을 평가하였다. 실리케이트 함침 후 광촉매 도포를 함으로서 광촉매의 부착성을 확보할 수 있었으며, 콘크리트의 내구성 개선과 광촉매 고유의 정화성능을 유지할 수 있었다.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.448-455
• /
• 2018

Glass wool is an eco-friendly materials that is manufactured through a continuous process by processing waste glass. This materials is low cost compared with another materials and has excellent thermal conductivity. For this reason, glass wool is installed as insulation system for LNG carriers and as insulation of building wall as well as various industries. The mechanism of insulation of glass wool is the conduction of the wool itself and convection by space between fibers. Therefore, in order to develop the enhanced thermal conductivity of glass wool is necessary to reduce its own conduction or to insert additional material after manufacturing as well as prevent convection. In this respect, many researchers have been actively studying to decrease thermal conductivity of polyurethane foam using by inserted glass wool or change the chemical component of glass wool. However, many research are aiming reduction of glass wool itself. This study focus on post-processing and inserted different materials; silica-aerogel, kevlar fiber 1mm, 6mm and glass bubble. Experimental results show that the thermal conductivity almost decreases with the addiction of glass bubble and silica aerogel.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.84-90
• /
• 2013

본 논문은 기존 순환골재 생산공장에서 새로운 설비투자나 복잡한 처리공정을 거치지 않고 비교적 용이하게 순환골재의 품질을 개선할 수 있는 효과적인 코팅처리방법을 도출하고, 도출한 코팅처리방법으로 순환골재를 코팅처리하여 그 품질개선 효과를 확인하였다. 연구목적을 달성하기 위하여 순환골재를 코팅하기 위하여 코팅처리용액중 하나인 실리케이트 용액을 경제성 있게 알맞은 농도로 희석하여 사용하였으며, 골재의 코팅방법을 달리하여 12가지 종류의 코팅골재에 대한 물성평가를 실시하였다. 또한 가장 좋은 물성을 나타낸 코팅골재를 사용하여 콘크리트를 제조하였다. 이상의 실험결과 골재를 코팅처리용액에 함침 및 건조를 반복하였을 때 골재의 품질이 가장 우수하게 나타났고, 다른 코팅방법 또한 물성이 코팅처리 전 골재보다는 향상되는 것으로 나타났으나, KS 기준에는 미치는 못하는 결과를 나타내었다. 또한, 가장 좋은 물성을 나타낸 골재를 가지고 콘크리트를 제조한 결과 설계기준강도를 만족시키는 압축강도가 측정되었으며, 설계기준강도 24MPa 이하의 도로시설물을 축조할 때 활용이 가능할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.144-151
• /
• 2010

본 연구에서는 고비용의 실리카흄의 대체재로서 인산부산석고와 카올린을 활용한 시멘트매트릭스의 화학적, 기계적 성질에 대하여 분석하였다. 실험을 위하여 인산부산석고는 이수석고 형태인 건조석고, 반수석고, III형 무수석고, II형 무수석고로 실험용시료를 제조하였으며, $900^{\circ}C$에서 소성된 카올린은 서냉과 급냉의 형태로 제조된 메타카올린의 형태로 제조하였다. 또한 이재료를 활용하여 혼합시멘트를 제조하였으며, 제조된 시멘트를 사용하여 실리카 흄을 혼입한 시멘트 매트릭스와 재료적 성능을 비교 평가하였다. 실험결과 급냉 제조된 메타카올린이 다른 재료에 비하여 성능이 우수한 것으로 분석되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.111-119
• /
• 2023

최근 다양한 시멘트 기반 재료들이 새롭게 개발되고 있으며, 이에 새롭게 개발된 재료들의 물성을 예측하려는 시도도 증가하고 있다. 본 연구에서는 시멘트계 재료로 구성된 2성분계 페이스트의 유변특성을 정량적으로 예측하고자 하였다. 사용된 시멘트계 재료는 포틀랜드 시멘트(PC), 플라이애시(FA), 고로슬래그(BS), 실리카퓸(SF)이 사용되었으며, 시멘트를 기반으로 나머지 3가지의 결합재를 혼합하였다. 페이스트의 항복응력과 소성점도는 각각 YODEL(Yield stress mODEL)과 Krieger-Dougherty's equation을 사용하여 예측하였으며, Rheometer를 사용한 실험 결과를 통해 예측 모델의 성능을 확인하였다. 개별 재료의 예측에 사용된 물성과 매개변수를 재구성하여 2성분계 페이스트의 유변특성을 예측하였을 때, 제안된 방법에 따른 예측의 경향이 실험 결과와 잘 일치하는 것으로 나타났다.