• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.159-159
• /
• 2007

In order to reduce a signal delay in ULSI, low resistive metal and intermetal dielectric material of low dielectric constant are required. Ordered mesoporous silica film is proper to intermetal dielectric due to its low dielectric constant and superior mechanical properties. In this study, ordered mesoporous silica films was synthesized using TEOS (tetraethoxysilane) / MTES (methyltriethoxysilane) mixed silica precursor and Brij-$76^{(R)}$ surfactant. These films had the porosity of 40% and dielectric constant of 2.5. To lower dielectric constant, the ordered mesoporous silica films were surface-modified by HMDS (hexamethyldisilazane) treatment. HMDS substituted -OH groups on the surface of silica wall for -Si$(CH_3)_3$ groups. After the HMDS treatment, ordered mesoporous silica films were calcined at various calcination temperatures. Through the investigation, it was concluded that the proper calcination temperature is necessary as aspects of structural, electrical, and mechanical properties.

• Advances in concrete construction
• /
• 제5권5호
• /
• pp.423-436
• /
• 2017

Today, pozzolans are widely used in construction for various reasons such as technical and economic efficiency. In this research, in order to evaluate some of important properties of concrete, silica fume and fly ash have been used as a replacement for cement in different mass percentages. Concrete mixtures were made from a water-cement ratio of (0.45) and cured under similar conditions. The main focus of this study was to evaluate the permeability and mechanical properties of concrete made from binary and ternary cementitious mixtures of fly ash and silica fume. In this study permeability of concrete was studied by evaluating the sorptivity, water absorption, water penetration depth, electrical resistivity and rapid chloride permeability (RCP) tests. Mechanical properties of concrete were evaluated with compressive strength, splitting tensile strength and modulus of elasticity. Scanning electronic microscopy (SEM) was used to characterize the effects of silica fume and fly ash on the pore structure and morphology of concrete with cement based matrix. The results indicated that the incorporation of silica fume and fly ash increased the mechanical strength and improved the permeability of concrete.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.87-92
• /
• 2010

본 연구에서는 실리카흄 대체재로 활용 가능한 실리카 흄 무혼입 결합재(SFFB)의 치환율에 따른 고강도 콘크리트의 품질특성을 비교 분석하기 위하여, 실리카흄, SFFB의 2수준과 물-결합재비는 25, 35% 치환율은 실리카 흄 10%, SFFB 5, 10, 15(%)의 4수준으로 설정하였다. 실험을 실시한 결과, 목표 유동성을 확보하기 위한 고성능감수제의 첨가율은 물-결합재비가 낮을수록 증가하였으며, SFFB가 실리카 흄 보다 저흡수성을 갖는 재료적 특성으로 인해 고성능감수제의 첨가율이 감소하는 경향을 나타내었다. 압축강도에서는 SFFB 치환율이 10%일 경우 인장강도에서는 치환율이 15%일 경우 가장 우수한 강도를 나타내었으며, 자기수축에서는 W/B와 SFFB의 치환율과 상관없이 Plain(SF)에 비해 수축이 저감하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1201-1216
• /
• 2015

This paper presents the details of size independent fracture energy and bi-linear tension softening relation for nano modified high strength concrete. Nano silica in powder form has been used as partial replacement of cement by 2 wt%. Two popular methods, namely, simplified boundary effect method of Karihaloo et al. (2003) and RILEM (1985) fracture energy with P-${\delta}$ tail correction have been employed for estimation of size independent fracture energy for nano modified high strength concrete (compressive strength ranges from 55 MPa to 72 MPa). It is found that both the methods gave nearly same values, which is an additional evidence that either of them can be employed for determination of size independent fracture energy. Bi-linear tension softening relation corresponding to their size independent fracture energy has been constructed in an inverse manner based on the concept of non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.403-412
• /
• 2014

In this paper, enhancement of corrosion and chloride resistance of high performance self compacting concrete (SCC) through incorporating nanosilica into the binder has been investigated. For this purpose, different mixtures were designed with different amounts of silica fume and nano silica admixtures. Different binder contents were also investigated to observe the binder content effect on the concrete properties. Corrosion behavior was evaluated by chloride penetration and resitivity tests. Water absorption and capillary absorption were also measured as other durability-related properties. The results showed that water absorption, capillary absorption and Cl ion percentage decreased rather significantly in the mixtures containing admixtures especially blend of silica fume and nano silica. By addition of the admixtures, resistivity of the SCC mixtures increased which can lead to reduction of corrosion probability.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.13-18
• /
• 2017

물유리는 기존의 silicon alkoxide보다 훨씬 단가가 저렴하여 상업화에 유리하다는 장점을 나타낸다. 물유리 기반 실리카 에어로겔의 제조에서 산 촉매에 의한 중합 과정이 최종 미세 기공구조 특성에 상당한 영향을 끼치는데, 본 연구에서는 이러한 산 촉매의 종류와 양에 대한 물유리 기반 실리카 에어로겔의 비표면적, 기공 크기 분포 등 각 경우에 해당하는 물성 및 그에 따른 차이를 연구하였다. 최종 생성물의 물성을 통해 물유리 기반 실리카 에어로겔은 중합 반응에 관여하는 산 촉매의 종류와 농도, 몰수에 의해 영향을 받고, 특히 산 촉매의 몰수에 의한 영향이 몰 농도에 의한 영향보다 크게 작용함을 확인하였다. 기존 방식으로 4M 염산 촉매를 첨가할 경우 비표면적이 $394m^2/g$, 기공의 부피가 2.20 cc/g, 평균 기공 지름이 22.3 nm이며 기공률이 92.53%인 실리카 에어로겔을 합성할 수 있었다. 반면 4M의 황산 촉매를 적정량의 몰수인 73 mmol로 투입하여 최종 물유리 기반 실리카 에어로겔을 제조할 경우 비표면적은 $516m^2/g$, 기공의 부피는 3.10 cc/g, 평균 기공 지름은 24.1 nm, 기공률은 96.1%로, 기존의 산 촉매를 투입하여 만든 물유리 기반 실리카 에어로겔보다 전반적으로 기공구조의 특성이 향상됨을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.55-62
• /
• 2008

본 연구는 실리카 퓸의 대체율을 4단계(시멘트 중량의 0, 5, 10 및 15%)로 달리하여 제조한 시멘트 모르타르의 황산마그네슘 침식 저항성을 평가하며, 침식에 의한 성능저하 원인을 조사하기 위하여 수행되었다. 실리카 퓸 혼합 모르타르를 5% 황산마그네슘 용액에 360일 동안 침지한 후, 재령별 압축강도 및 팽창을 측정하였으며, XRD, SEM 및 DSC와 같은 여러 기기분석법을 활용하여 침식에 의한 시멘트 경화체의 성능저하 원인을 고찰하였다. 실험 결과에 의하면, 실리카 퓸을 혼합한 시멘트 경화체의 황산마그네슘 침식은 주로 gypsum, thaumasite 및 brucite 등의 반응생성물과 깊은 관련이 있는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.153-162
• /
• 2001

This paper presents the fundamental study on rational manufacture of Ultra High Strength(VHS) concrete using industrial by-products as like silica fume, slag and fly ash. In this study, we had tested various mixing cases to manufacture the UHS concrete(target compressive strength : over $1,000kgf/cm^2$) which is easily workable (target slump flow : $60{\pm}10cm$). The main variables are studied: 1) to find the optimum replacement ratio of mineral admixture. 2) to find a rational water-binder ratio and a proper binder content. 3) to find the method for reduction of slump loss. From the test results, it is concluded that the rational mix design can be made by using 40% slag, 10% silica fume. We found that compressive strength of UHS concrete increases according to decreasing W/B ratio but in W/B ratio 18~20%, the difference is vague and the compressive strength does not necessarily increase according to increasing binder content over 700kg.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.488-494
• /
• 1991

In this study, the effects of catalyst and DCCA content were investigated in order to determine the optimum conditions of monolithic silica gel formation through sol-gel process. Formamide, oxalic acid, glycerol and dimethylformamide are used as DCCA. To observe the phenomena in drying and heat-treating of gels, we examined structural exchange of gels using FT-IR, TG-DTA and XRD. Monolithic gels were obtained by adding formamide and dimethylformamide as DCCA. According to the heat treatment schedule, silica glass is prepared by heat-treatment up to 1050$^{\circ}C$.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.34-41
• /
• 2024

In this study, the effects of the type and content of silica on the mechanical and tear properties of chloroprene rubber (CR), which is mainly used as a jacket material for mining cables, were studied. The crosslinking density (ΔM) and reinforcing factor (α_f) defined using cure characteristics increased with increasing silica content, whereas the cure rate decreased. The hardness, tensile strength, and modulus of the CR compounds increased depending on the silica content and structural development. The reinforcing behavior of the silica-filled CR compounds according to the silica type and content showed the best fit with the Thomas equation of the predictive model. Tear strength was evaluated using two standard test methods, ASTM D470 and DIN VDE 0472-613, and the results were compared. The tear strength increased as the silica content increased, regardless of the test method, and the different tear strengths obtained by the two standard test methods showed a linear relationship with each other, indicating a high correlation.