• Investigative Magnetic Resonance Imaging
• /
• 제3권2호
• /
• pp.159-166
• /
• 1999

Purpose : To evaluate the effect of rotational correlation time (${\tau}_R$) and the possible related changes of other parameters, ${\tau}_M,{\;}{\tau}_S,{\;}and{\;}(\tau}_V$ of gadolinium (Gd) chelate on T1 relaxation enhancement in two pool model. Materials and Methods : The NMRD (Nuclear Magnetic Relaxation Dispersion) profiles were simulated from 0.02 MHz to 800 MHz proton Larmor frequency for different values of rotational correlation times based on Solomon-Bloembergen equation for inner-sphere relaxation enhancement. To include both unbound pool (pool A) and bound pool (pool B), the relaxivity was divided by contribution from unbound pool and bound pool. The rotational correlation time for pool A was fixed at the value of 0.1 ns, which is a typical value for low molecular weight complexes such as Gd-DTPA in solution and ${\tau}_R$ for pool B was changed from 0.1 ns to 20 ns to allow the slower rotation by binding to macromolecule. The fractional factor of was also adjusted from 0 to 1.0 to simulate different binding ratios to macromolecule. Since the binding of Gd-chelate to macromolecule cab alter the electronic environment of Gd ion and also the degree of bulk water access to hydration site of Gd-chelate, the effects of these parameters were also included. Results : The result shows that low field profiles, ranged from 0.02 to 40 MHz, and dominated by contribution from bound pool, which is bound to macromolecule regardless of binding ratios. In addition, as more Gd-chelate bound to macromolecule, sharp increase of relaxivity at higher field occurs. The NMRD profiles for different values of ${\tau}_S$ show the enormous increase of low field profile whereas relaxivity at high field is not affected by ${\tau}_S$. On the other hand, the change in ${\tau}$V does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximum relaxivity value. The results shows a parabolic dependence of relaxivity on ${\tau}_M$. Conclusion : Binding of Gd-chelate to a macromolecule causes slower rotational tumbling of Gd-chelate and would result in relaxation enhancement, especially in clinical imaging field. However, binding to macromolecule can change water enchange rate (${\tau}_M$) and electronic relaxation ($T_le$) vis structural deformation of electron environment and the access of bulk water to hydration site of metal-chelate. The clinical utilities of Gd-chelate bound to macromolecule are the less dose requirement, the tissue specificity, and the better perfusion and intravascular agents.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.355-363
• /
• 1999

The experiments were carried out to elucidate the varietal variation of retrogradation in aged cooked rice and its association with some physicochemical properties of milled rice. The fifteen rice materials were selected from forty-three low-amylose japonica and Tongil-type rice cultivars based on palatability and retrogradation of cooked rice stratified by preliminary sensory evaluation of warm and cooled cooked rice. One japonica glutinous rice variety was included for comparison of retrogradation of cooked rice. The $\alpha$-amylase-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The desirable checking time for evaluating the varietal difference in deterioration of aged cooked rice was four hours after storing in room temperature and two hours after preserving in refrigerator based on the largest coefficients of variations in degree of retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, showed the relatively fast deterioration of cooked rice. The retrogadation index represented by the percentage of retrogradation difference between warm and cooled cooked rice to original estimates of warm cooked rice was significantly affected by the degree of retrogradation of cooled cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogradation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked nce. The varietal difference in retrogradation of cooked rice can be effectively classified by scatter diagram on the plane of upper two principal components based on some retrogradation properties of cooked rice. The deteriorated structural change in cooled cooked rice by observing through the scanning electron microscope was more conspicuous in the fastly retrograded cooked rice than in the slower one.

• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.46-51
• /
• 2015

스테인레스강은 고온, 고압에서 부식에 효과적인 재료로써 액화수소, 가스 등을 저장하는 저장용기 및 고온의 유체들을 이송하는 배관재료로 널리 사용되고 있다. 일반적으로 스테인레스강의 용접은 TIG용접이 이용되어지고 있으며 용접후 용접부위에 발생하는 초기 용접결함 및 사용중 발생하는 열적 피로균열 등이 재료의 신뢰성을 저하하는 요인들로 지적되고 있다. 본 논문에서는 레이저 유도초음파를 이용하여 초기 용접결함에 대한 초음파 특성 규명을 위하여 스테인레스강의 용접부에 인공균열의 크기를 5 mm, 10 mm, 20 mm 길이로 가공후 유도초음파의 결함 길이 변화에 따른 특성을 평가하였다. 배관의 두께 등을 고려하여 L(0,1)모드와 L(0,2)모드를 이용하였으며 각각의 모드가 결함의 길이 변화에 따라 변화를 보였지만 L(0,2)모드가 L(0,1)모드보다 결함 길이에 더욱 민감하게 반응하였다. 본 연구에서는 L(0,1)모드와 L(0,2)모드의 진폭비를 구하여 결함과의 연관성을 평가한 결과 결함 길이와 선형적인 관계를 나타냄으로써 각 모드를 단독적으로 평가하는 것보다는 두 모드의 진폭비를 이용하여 결함을 평가하는 것이 더욱 효과적임을 알 수 있었다.

• 동의생리병리학회지
• /
• 제25권5호
• /
• pp.765-772
• /
• 2011

Knowledge which is represented by formal logic are widely used in many domains such like artificial intelligence, information retrieval, e-commerce and so on. And for medical field, medical documentary records retrieval, information systems in hospitals, medical data sharing, remote treatment and expert systems need knowledge representation technology. To retrieve information intellectually and provide advanced information services, systematically controlled mechanism is needed to represent and share knowledge. Importantly, medical expert's knowledge should be represented in a form that is understandable to computers and also to humans to be applied to the medical information system supporting decision making. And it should have a suitable and efficient structure for its own purposes including reasoning, extendability of knowledge, management of data, accuracy of expressions, diversity, and so on. we call it ontology which can be processed with machines. We can use the ontology to represent traditional medicine knowledge in structured and systematic way with visualization, then also it can also be used education materials. Hence, the authors developed an Shanghanlun ontology by way of showing an example, so that we suggested a methodology for ontology development and also a model to structure the traditional medical knowledge. And this result can be used for student to learn Shanghanlun by graphical representation of it's knowledge. We analyzed the text of Shanghanlun to construct relational database including it's original text, symptoms and herb formulars. And then we classified the terms following some criterion, confirmed the structure of the ontology to describe semantic relations between the terms, especially we developed the ontology considering visual representation. The ontology developed in this study provides database showing fomulas, herbs, symptoms, the name of diseases and the text written in Shanghanlun. It's easy to retrieve contents by their semantic relations so that it is convenient to search knowledge of Shanghanlun and to learn it. It can display the related concepts by searching terms and provides expanded information with a simple click. It has some limitations such as standardization problems, short coverage of pattern(證), and error in chinese characters input. But we believe this research can be used for basic foundation to make traditional medicine more structural and systematic, to develop application softwares, and also to applied it in Shanghanlun educations.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.39-46
• /
• 2010

2007년부터 아이오와 주 교통국에서는 고속도로와 국도에서 FWD 장비를 이용하여 네트워크 레벨에 필요한 조사를 실시하였고 처짐 자료와 포장 구조분석 결과를 데이터베이스로 구축하는 작업을 시작하였다. 축적된 데이터베이스에 정보는 포장에 구조적 문제점을 발견하고 포장에 잔류 공용수명을 예측하여 포장에 유지보수 시점을 결정하는데 사용한다. 현재 아이오와 주 교통국에서 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜은 포장 표면에 3번에 하중을 각각 재하하여 8개에 지오폰으로부터 측정한 처짐량을 이용, 역 계산을 통해 포장구조 해석을 수행하고 있으며 조사지점 수는 조사하는 도로의 구간 길이에 따라 결정하고 있다. 그러나, 현재 사용하고 있은 FWD 네트워크 레벨 조사 프로토콜은 1년 동안 아이오와 주 전체 도로 네트워크에 약 20%만을 조사할 수 있는 것으로 나타났다. 따라서, 해마다 아이오와 주 도로 네트워크에 20% 이상을 조사하기 위해서는 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜을 간소화해야 할 필요가 있다. 본 연구에 목적은 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜에서 FWD 측정 데이터에 영향을 미치지 않는 범위내에서 최소 하중 재하 수와 조사지점 수를 결정하기 위한 것이다. 83개에 합성포장 구간을 대상으로 측정한 FWD 네트워크 레벨 조사에서는 FWD 네트워크 레벨 조사 프로토콜에서 하중 재하 수와 조사지점 수를 줄여도 포장 구조해석 결과에는 크게 영향을 미치지 않는 것으로 나타났다. 간소화된 FWD 네트워크 레벨 조사 프로토콜은 FWD 측정 결과에 영향을 미치지 않으면서 측정 조사율을 높일 수 있을 뿐만 아니라 교통 통제로 인한 간접비용도 절감시킬 수 있을 것으로 기대하고 있다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• 한국해안·해양공학회논문집
• /
• 제23권1호
• /
• pp.34-42
• /
• 2011

지구온난화로 인한 태풍 강도 증가와 장기해수면 상승에 대처하기 위하여 호안 및 방파제의 마루높이를 고정식으로 증가시키는 것이 일반적이다. 그러나 이와 같은 대처방식은 월파저지에는 효과적이나 수변공간의 바다 조망권을 저하시키는 단점을 가지고 있다. 본 연구에서는 황천 시에 전개시키고 평상 시 격납하여 월파저지와 조망권 확보 기능을 동시에 달성할 수 있는 일종의 동적 가변형 구조물인 고무막체 파라펫의 개발을 시도하였다. 본 구조물은 순전히 공기의 주입 및 배출에 의하여 제어되는 무인 작동 구조물로서 해황에 따라 원격제어가 가능하다. 고무막체 파라펫의 여러 최적형상이 도출되었으며 비선형 유한요소 프로그램을 사용한 수치해석 및 수리모형실험을 통하여 이들 파라펫들의 전개 및 격납 과정, 그리고 월파발생시의 거동 및 구조적 안정성을 검토하였다.

• 한국광물학회지
• /
• 제15권4호
• /
• pp.243-257
• /
• 2002

Ca-형과 Na-형 벤토나이트는 물성의 차이로 인하여 그 용도를 달리하며, 국내에서는 Ca-형 벤토나이트만 산출되기 때문에 산업체에서는 Na-형으로 변환시켜 토목용이나 주물용으로 활용되고 있다. 이 연구는 Ca-형과 Na-형 벤토나이트의 몇 가지 물성을 비교하여 그 차별성을 명확히 밝히고자 한다. 또한 HDTMA(Hexadecyltrimethylammonium)나 CP(Cetylprydinium)와 같은 유기양이온을 Ca-형과 Na-형 벤토나이트에 치환시켜 유기 양이온과 벤토나이트와의 흡착 특성을 비교 하고자 시도되었다. Na-형 벤토나이트는 Ca-형 벤토나이트에 비해 강한 알카리성, 매우 높은 팽윤성과 점도를 나타내나, 양이온 교환능과 MB(Methylene Blue) 흡착양은 변화를 보이지 않는다. 탁도는 Na-형 벤토나이트가 높으며 시간의 변화에 따라서도 거의 변화가 초래되지 않았으나, Ca-형 벤토나이트는 단시간 내 급격하게 응집이 초래되었다. 열 분석 결과 큰 차이는 보이지 않으나 흡착수와 층간수의 분해는 Na-형 벤토나이트가 보다 저온에서 빨리 일어나며, 완전한 구조의 분해는 Ca-형 벤토나이트가 Na-형 벤토나이트보다 저온에서 용이하게 일어났다. HDTMA와 CP를 벤토나이트에 치환케 되면 대체적으로 강한 층간팽창이 초래되어 저면 간격이 40 $\AA$ 이상 늘어남으로써 공간을 제공하여 연속적인 흡착이 초래되었다. HDTMA의 흡착은 양이온 교환능의 200% 이상을 치환하였을 때 거의 포화상태에 달하여 저면 간격이 $37～38\AA$으로 팽창이 초래되었으나, CP의 흡착은 양이온 교환능의 140% 이상을 치환케 되면 저면 간격이 $40\AA$에 달하여 거의 포화되었다. 이는 CP가 HDTMA보다 용이하게 층간팽창을 초래시키고 흡착이 일어남을 의미한다. CP와 Ca-형 및 Na-형 벤토나이트와의 흡착거동은 L형의 흡착등온선을 나타내었으며, 매우 규칙적이고 일관성 있게 흡착이 일어남으로써 안정한 상태를 유지하였다. 또한 층간 교환성 양이온 종에 관계없이 유기양이온 흡착거동은 거의 동일하게 일어났다.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.262-269
• /
• 2007

The blur phenomenon obscuring the boundary between the field of designers and that of users may be the key paradigm in the 21st century. However, we observed a number of chair design cases that could be considered as the results of blur pheonomenon in the furniture design field from mid 1960s. The backgrounds include the repulsion against the uniform functionalism, deliberation on the life in the future and the development of plastic materials and their processing methods. Under such backgrounds, the designers pursued the new and futuristic furniture design. In that process, what is about the "freedom" that the consumers as well as the designers should have in using the furniture was the important concept. This concept enabled the creation of chair design inducing the participation of consumers. They created various kinds of shapes, functions and structures that the consumers became interested in as if they had fun with toy blocks by mainly using the new material "plastic". In a formative aspect, the entire shape is classified into the organic shape and geometric shape. The unit types are divided into two kinds; type that the unit of simple shape is repeated only with size difference and irregular combination type of the units comprised of more than two shapes. In the functional aspect, some cases showed the transformation and expansion of the function more variously. Other cases changed the function of chairs to tables, cabinets, or objects. In the structural aspect, on the basis of the method assembling each unit, one method is to assemble using the hardware and the other is to assemble only with intrinsic units of chair. The chair design created by the blur phenomenon between the designers and the users as described above causes the blur phenomenon between the furniture and the space where the furniture is installed. Accordingly, it is expanding the furniture design sphere including the case that the furniture is not selected as the rifle article depending on the characteristics of interior space but it becomes the element leading the characteristics of space. This study aims to estimate the change of interior space and the furniture that my cause the blur phenomenon by examining the cases above appropriate for the paradigm of the 21st century. Furthermore, this study will enable the discussion oil the directions of future furniture design based on its results.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1381-1389
• /
• 2012

본 논문에서는 쇼트피닝 가공한 알루미늄 7075-T6 재료의 부식피로향상에 대한 연구를 하였다. 사용된 알루미늄 금속은 상대적으로 가볍고 강한 재료의 특성으로 항공기 주요부품의 재료로 사용되고 있으며, 많은 연구를 통해 알루미늄을 사용하면 약 50%의 무게 감소효과를 낼 수 있다고 한다. 재료의 부식은 인장환경에서 재료의 파단시점을 앞당기고 구조물의 수명을 심각하게 감소시킨다. 따라서 알루미늄 금속의 부식 환경에서의 재료의 부식저항을 향상 시킬 수 있는 연구가 요구된다. 쇼트피닝 가공은 재료 표면에 압축잔류응력을 인가하여 재료의 피로수명을 늘리고 나아가 재료의 신뢰성을 확보하는 기술로 반복하중을 받는 많은 부품들에 이미 적용되어 사용되고 있다. 부식 환경에서는 가공 후 거칠어진 표면으로 인해 공식부식을 야기하지만, 피닝가공에 의한 표면 직하에 압축잔류응력이 부식을 억제하여 부식저항을 증가시킨다. 본 연구에서의 쇼트피닝가공된 시험편에 대한 실험결과와 선행연구에서의 쇼트피닝 가공하지 않은 알루미늄 합금 재료의 부식피로특성을 비교하였다. 실험 결과 쇼트피닝 가공은 알루미늄합금의 피로수명향상에 영향을 미치고, 압축잔류응력은 부식피로수명을 증가시킴을 알 수 있었다.