• 전산구조공학
• /
• 제10권2호
• /
• pp.149-160
• /
• 1997

본 연구에서는 경계부 및 연결부를 지닌 기계 구조물의 유한요소모델 수립시 상대적으로 불확실성이 많은 경계부 및 연결부를 정확히 모델링하여 전체 구조계에 대한 해석적 모델의 신뢰도를 제고하는데 그 목적을 두고, 현장에서 간단히 측정할 수 있는 측정 데이터와 축약된 형태의 유한요소모델을 이용하는 S.I.기법을 제시하였다. 제시된 방법은 연결부를 제외한 연속체를 유한요소법으로 모델링하고 연결부의 동적 계수를 변수 상태로 하여 시간 영역에서의 비선형 상태 방정식을 구성하였으며 계수 규명 문제를 비선형 상태 방정식의 상태 추정 문제로 변환하여 해결하였다. 두 가지 예제에 대한 수치 해석을 통하여 제시된 기법의 타당성을 검증하였다.

• 한국전산구조공학회논문집
• /
• 제21권1호
• /
• pp.83-90
• /
• 2008

본 논문에서는 프리스트레스 콘크리트(PSC) 거더교의 긴장력 손실을 예측하기 위한 진동기반 모니터링 체계를 제안하였다. 제안한 체계는 긴장력 손실 경보 단계와 긴장력 손실 정도를 평가하는 단계로 구성하였다. 먼저, 긴장력 손실 경보를 위해 두 위치에서 취득된 주파수 응답의 변화를 사용하여 긴장력 손실의 발생을 모니터링하는 새로운 전역적 손상경보기법을 제안하였다. 제안된 기법은 응답신호의 파워스펙트럼만을 이용하기 때문에 별도의 모드해석과정 없이 실시간으로 손상경보가 가능하다. 다음으로, 긴장력 손실 정도를 평가하기 위하여 고유진동수의 변화로부터 긴장력의 상대적인 손실 정도를 평가할 수 있는 긴장력 손실 예측 기법을 선정하였다. 제안된 체계의 유용성을 축소 모형 PSC 거더에 대한 실험을 통해 평가하였다.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.719-743
• /
• 2011

A hybrid damage monitoring scheme using parallel acceleration-impedance approaches is proposed to detect girder damage and support damage in steel plate-girder bridges which are under ambient train-induced excitations. The hybrid scheme consists of three phases: global and local damage monitoring in parallel manner, damage occurrence alarming and local damage identification, and detailed damage estimation. In the first phase, damage occurrence in a structure is globally monitored by changes in vibration features and, at the same moment, damage occurrence in local critical members is monitored by changes in impedance features. In the second phase, the occurrence of damage is alarmed and the type of damage is locally identified by recognizing patterns of vibration and impedance features. In the final phase, the location and severity of the locally identified damage are estimated by using modal strain energy-based damage index methods. The feasibility of the proposed scheme is evaluated on a steel plate-girder bridge model which was experimentally tested under model train-induced excitations. Acceleration responses and electro-mechanical impedance signatures were measured for several damage scenarios of girder damage and support damage.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.309-325
• /
• 2013

Environmental and operational variables are inevitable concerns by researchers and engineers when implementing the damage detection algorithm in practical projects, because the change of structural behavior could be masked by the conditions in a large extent. Thus, reliable damage detection methods should have a virtue of immunity from environmental and operational variables. In this paper, the pair cointegration method was presented as a novel way to remove the effect of environmental variables. At the beginning, the concept and procedure of this approach were introduced, and then the theoretical formulation and numerical simulations were put forward to illustrate the feasibility. The jump exceeding the control limit in the residual indicates the occurrence of damage, while the direction and magnitude imply the most potential damage location. In addition, the simulation results show that the proposed method has strong ability to resist the noise.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권3호
• /
• pp.147-156
• /
• 2003

본 논문에서는 모드형상을 이용한 트러스 구조물의 손상탐지 방법을 소개하였다. 트러스 부재에 대한 손상탐지 이론은 손상 전과 손상 후의 모달 변형에너지의 차이점을 이용하여 정립하였으며, 이론의 타당성을 조사하기 위하여 1:6 축척의 6각형 트러스 구조물의 실험 데이터에 이론을 적용하였다. 손상 실험은 총 17가지의 시나리오로 구성되어 있으며, 손상 타입은 3가지로 구성되어있다. 17가지 실험 데이터에 대한 손상평가 결과, 본 연구에서 제안한 방법으로 트러스 부재의 손상을 성공적으로 탐지할 수 있었으며, 비교적 작은 손상의 경우 계측 데이터의 노이즈가 손상탐지 성능에 많은 영향을 미친다는 것을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.394-399
• /
• 2005

In this paper, a structural damage identification method (SDIM) is developed to identify the line crack-like directional damages generated within a cylindrical shell. First, the equations of motion fur a damaged cylindrical shell are derived. Based on a theory of continuum damage mechanics, a small material volume containing a directional damage is represented by the effective orthotropic elastic stiffness, which is dependent of the size and the orientation of the damage with respect to the global coordinates. The present SDIM is then derived from the frequency response function (FRF) directly solved from the dynamic equations of the damaged cylindrical shell. In contrast with most existing SDIMs which require the modal parameters measured in both intact and damaged states, the present SDIM requires only the FRF-data measured in damaged state. By virtue of utilizing FRF-data, one may choose as many sets of excitation frequency and FRF measurement point as needed to acquire a sufficient number of equations fer damage identification analysis. The numerically simulated damage identification tests are conducted to study the feasibility of the present SDIM.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권3호
• /
• pp.203-211
• /
• 1999

This study is to examine the feasibility of carbon fiber sheet(CFS), a kind of fiber reinforced plastic(FRP), for a repair and reinforcement of R/C beams. The flexural strength of R/C beams, that were preloaded and then the cracks were repaired, maintains that of the uncracked R/C beams. The flexural strength of R/C beams increases with the reinforcement of CFS. In order to practically apply the repair and reinforcement method, further research is needed for the distribution, amount, and bond of CFS. In this study, an experiment was conducted for R/C beams reinforced with CFS, for various wrapping method and amounts of CFS. Experimental results showed the wrapping method increasing the bond area and amount of CFS layer caused the increase in the strength of the beams. It is found that the strength of CFS should be used as 70% of the maximum strength in retrofitting reinforced concrete beams in evaluating flexural capacity on the basis of ultimate strength design method.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.653-664
• /
• 2014

Wind fragility analysis provides a quantitative instrument for delineating the safety performance of civil structures under hazardous wind loading conditions such as cyclones and tornados. It has attracted and would be expected to continue to attract intensive research spotlight particularly in the nowadays worldwide context of adapting to the changing climate. One of the challenges encumbering efficacious assessment of the safety performance of existing civil structures is the possible incompleteness of the structural appraisal data. Addressing the issue of the data missingness, the study presented in this paper forms a first attempt to investigate the feasibility of using the expectation-maximization (EM) algorithm and Bayesian techniques to predict the wind fragilities of existing civil structures. Numerical examples of typical linear or hysteretic shear frames are introduced with the wind loads derived from a widely used power spectral density function. Specifically, the application of the maximum a posteriori estimates of the distribution parameters for the story stiffness is examined, and a surrogate model is developed and applied to facilitate the nonlinear response computation when studying the fragilities of the hysteretic shear frame involved.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.669-679
• /
• 2018

In this paper the behavior of reinforced concrete (RC) beam-column connections under cyclic loading was analyzed. The specimens, manufactured in a reduced-scale were made of (a) recycled aggregate concrete (RAC) by replacing 30% of natural coarse aggregate (NCA) with recycled coarse aggregate (RCA) and (b) RAC incorporating Polyethylene terephthalate (PET) fiber i.e., PET fiber-reinforced concrete (PFRC) at the joint region. PET fiber (aspect ratio=25) of 0.5% by weight of concrete used in the PFRC mix was obtained by hand cutting of post-consumer PET bottles. A reference specimen was also prepared using 100% of NCA and subjected to similar loading sequence. Comparing the results the structural behavior under cyclic loading of RAC specimens are quite similar to the reference specimens. Damage tolerance, load resisting capacity, stiffness degradation, ductility, and energy dissipation of the RAC specimens enhanced due to addition of PET fibers at the joint region. PFRC specimens also presented a lower damage indices and higher principal tensile stresses as compared to the RAC specimens. The results obtained gave experimental evidence on the feasibility of RAC for structural use. Using PET fibers as a discrete reinforcement is recommended for improving the seismic performance of RAC specimens.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.45-56
• /
• 2019

A modified mechanical model of pre-pressed spring self-centering energy dissipation (PS-SCED) brace is proposed, and the hysteresis band is distinguished by the indication of relevant state variables. The MDOF frame system equipped with the braces is formulated in an incremental form of linear acceleration method. A multi-objective genetic algorithm (GA) based brace parameter optimization method is developed to obtain an optimal solution from the primary design scheme. Parameter sensitivities derived by the direct differentiation method are used to modify the change rate of parameters in the GA operator. A case study is conducted on a steel braced frame to illustrate the effect of brace parameters on node displacements, and validate the feasibility of the modified mechanical model. The optimization results and computational process information are compared among three cases of different strategies of parameter change as well. The accuracy is also verified by the calculation results of finite element model. This work can help the applications of PS-SCED brace optimization related to parameter sensitivity, and fulfill the systematic design procedure of PS-SCED brace-structure system with completed and prospective consequences.