• 한국강구조학회 논문집
• /
• 제26권2호
• /
• pp.81-89
• /
• 2014

국내에서 진행되는 전단 접합부 상세 설계 프로세스를 고찰한 결과 구조 설계자와 제작도면 작성자 및 제작자간의 상호 정보 교류에 많은 문제점이 있으며, 작업 진행상에서도 불필요한 업무들이 존재하는 것으로 파악되었다. 이에 본 연구에서는 이러한 접합부 상세 설계시 문제점을 개선하기 위해 구조설계자가 접합부 구조설계부터 최종 도면화 작업까지를 일괄적으로 관리할 수 있는 개선된 설계프로세스를 제안하였으며, 이를 위해 강구조건축 접합부 표준상세 지짐의 내용을 활용하여 접합부 설계에 표준화 및 전산화를 도입할 수 있도록 하였다. 이를 통하여 구조적 안전성과 제작 및 시공성이 확보된 접합상세를 효율적으로 설계 및 도면화 할 수 있으며 기존 설계 프로세스에서 야기될 수 있는 문제점을 근본적으로 차단할 수 있었다.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.105-111
• /
• 2003

승용차의 휠은 타이어와 차체 무게를 지지하며, 회전력과 정지력을 노면으로 전달한다. 휠의 경량화는 차량의 연료효율에 효과적이므로, 스틸휠이 무게를 최소화하도록 디스크 홀이 형상을 최적화 하였다. 설계모델은 Pro/ENGINEER를 사용하여 설정하고, 설계모델의 해석은 ANSYS를 이용하였다. 범용 소프트웨어간의 직접적인 자료의 전달이 어려우므로 두 프로그램을 병합 사용하기 위해, 반응표면법을 이용한 근사함수를 구하였다. 5수준의 요인배치법의 실험값을 사용하여 최대응력과 최대 변위를 추출하였다. 초기 모델은 14인치 승용차용 스틸휠을 사용하였고, 디스크 홀의 폭을 설계변수로 선택하였다. 순차이차계획법과 활성화제약조건을 사용하는 PLBA(Pahenichny-Lim-Belegundu-Arora) 알고르즘을 이용하여 최적해를 구하였다.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.841-849
• /
• 2023

최근 건축물 해체공사 중 많은 사고가 발생함에 따라 건축물 해체에 대한 관심이 증가하고 있다. 이 연구에서는 국내와 국외의 사례를 통해 건축물 해체공사 전문인력에게 요구되는 기본역량을 분석하였다. 이를 위해 국내의 건축물 해체공사감리교육과 국가직무능력표준(NCS)의 구조물해체 직무의 능력단위에서 요구하는 능력을 조사하였고, 일본, 미국, 영국의 해체 공사 전문인력 자격시험 과목 및 관련 교육내용을 조사하였다. 연구결과, 해체공사 전문인력을 위한 요구역량을 법규, 구조, 안전, 계획, 운영, 시공, 환경의 7가지 분야로 분류하고, 기능직, 기술직, 관리직의 단계별로 분류할 필요성을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.34-41
• /
• 2006

A 3-dimensional stress measurement system based on the bore hole bottom deformation method, which is one of the stress relief methods, was developed. A pilot bore hole is drilled from the bottom of a bore hole and the stress meter is inserted into the pilot bore hole in the method. The bore hole is advanced as an over coring and the deformations in seven directions are measured by cantilever type-sensors. Using the cantilever type-sensors saves time for hardening of glue. No cable connection between the stress meter and a data logger is necessary since a compact data logger is installed in the stress meter. The accuracy of the stress meter was confirmed by a biaxial test for a Shikotsu welded tuff block although in-situ tests have not been carried out yet.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.698-705
• /
• 2004

Application of structural load on soft ground can cause lateral movement as well as ground break due to pressing and shearing of ground. Especially, abutment supported by pile foundation can make pile deformed due to lateral movement of ground in order to have harmful effect on structure. According to the result of this study, it is required to consider disturbance of weak soil layer when using lateral movement countermeasure method by EPS construction method as a result of performing study on safety review and EPS construction method with respect to this based on site where lateral movement occurs due to backside soil filling load at bridge abutment installed on weak ground, and it is required to sufficiently consider soil reduction during design of EPS construction method due to lateral movement deformation of soft clay layer by losing ground horizontal resistance force due to plasticity of ground around pile as well as combination part damage with pile head and expansion foundation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.128-131
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures. changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied and successfully applied to HDD cover model. To check the effectiveness of this surface grooving technique, the grooved HDD cover design was manufactured using rapid prototyping and experimentally tested to prove the effectiveness of the grooving method as one of SDM techniques. And the modal strain energy and eigenvalue sensitivity method for choosing the initial starting point are compared.

• Structural Engineering and Mechanics
• /
• 제67권6호
• /
• pp.671-682
• /
• 2018

The effect of earthquake induced torsion, due to mass eccentricities, is investigated with the objective of providing practical design guidelines for minimizing the torsional response of building structures. Current code provisions recommend performing three dimensional static or dynamic analyses, which involve shifting the centers of the floor masses from their nominal positions to what is called an accidental eccentricity. This procedure however may significantly increase the design cost of multistory buildings, due to the numerous possible spatial combinations of mass eccentricities and it is doubtful whether such a cost would be justifiable. This paper addresses this issue on a theoretical basis and investigates the torsional response of asymmetric multistory buildings in relation to their behavior when all floor masses lie on the same vertical line. This approach provides an insight on the overall seismic response of buildings and reveals how the torsional response of a structure is influenced by an arbitrary spatial combination of mass eccentricities. It also provides practical guidelines of how a structural configuration may be designed to sustain minor torsion, which is the main objective of any practicing engineer. A parametric study is presented on 9-story common building types having a mixed-type lateral load resisting system (frames, walls, coupled wall bents) and representative heightwise variations of accidental eccentricities.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.341-345
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied. In this work, the shape of base structure was modified to improve its dynamic characteristics such as natural frequencies via surface grooving technique. Grooving shape was formed by mergingthe neighboring small embossing elements after analyzing frequency increment sensitivities of all the neighboring emboss elements. For this process, Criterion Factor was introduced and the initial grooving was started from the element having highest strain energy and the grooving is expanded into neighboring element. The range of targeting grooving area to check its frequency variations restricted to their neighboring area to reduce the computation effort. This surface grooving technique was successfully applied to a hard disk drives (HDD) cover model to raise its natural frequency by giving some groove on its surface.

• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.381-390
• /
• 1999

In this study, a pseudo ship structure data model for the :.hip cargo hold structure based on STEP is proposed. The proposed data model is based on Application Reference Model of AP218 Ship Structure which is the model that specifies conceptual structures and constraints used to describe the information requirements of an application. And the proposeddata model refers the Ship Common Model framework for the model architecture which is the basis for ongoing ship AP development within the ISO ship-building group and the ship product definition information model of CSDP research project for analyzing the relationship between ship structure model entities. The proposed data model includes Space, Compartment. Ship Structural System, Structural Part and Structural Feature of cargo hold. To generate this data model schema in EXPRESS format, ‘GX-Converter’was used which enables user to edit a model in EXPRESS format and convert schema file in EXPRESS format. Using this model schema, STEP physical file containing design data for ship cargo hold data structure was generated through SDAI programming. The another STEP physical file was also generated containing geometry data of ship cargo hold which was extracted and calculated by SDAI and external surface/surface intersection program. The geometry information of ship cargo hold can be then transferred to commercial CAD system, for example, Pro/Engineer. Examples of the modification of the design information are also Presented.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.141-163
• /
• 2016

Fiber models have been developed and applied to various structural elements such as shear walls, beams and columns. Only scarcely have fiber models been applied to circular foundation systems such as cast in drilled holes shafts (CIDH). In pile foundations with constraint head boundary conditions, shear deformations can easily contribute to the lateral pile response. However, soil structure interaction formulations such as the p-y method, commonly used for lateral pile design, do not include structural shear deformations in its traditional derivation method. A fiber model that couples shear and axial-bending behavior, originally developed for wall elements was modified and validated on circular cross sections (columns) before being applied to a 0.61 m diameter reinforced concrete (RC) pile with fixed head boundary conditions. The analytical response was compared to measured test results of a fixed head test pile to investigate the possible impact of pile shear deformations on the displacement, shear, and moment profiles of the pile. Results showed that shear displacements and forces are not negligible and suggest that nonlinear shear deformations for RC piles should be considered for fixed-head or similar conditions. Appropriate sensor layout is recommended to capture shear deformation when deriving p-y curves from field measurements.