• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2325-2331
• /
• 2012

UHF 대역인 860MHz~960MHz에서 동작하는 RFID 시스템용으로 도체스트립을 이용한 평판사각 스파이얼 안테나를 제안하고 분석하였다. 도체스트립의 공통선 길이, 분리간격, 선폭, 선간격, 스파이럴 회전수를 변화시켜서 안테나 입력임피던스와 RFID 테그칩 간을 정합스터브 없이 소형으로 설계하고, 최적화된 안테나를 제작하였다. 최적화된 결과로부터, VSWR<2인 범위의 주파수대역은 RFID 초고주파 대역인 100MHz를 포함한다. 안테나 이득은 910MHz 중심주파수에서 3.5DBi이고, 빔패턴은 수직과 수평방향으로 지향성 패턴을 갖는다. 따라서 제안된 안테나는 규정된 입력임피던스를 갖는 다양한 형태의 테그칩을 요구하는 실질적인 RFID 응용에 적합하다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.359-362
• /
• 1998

The electromagnetic properties of leaky-waves guided by metal-strip grating configurations can be phrased in rigorous modal theory. Such a modal solution expressed by simple electrical transmissionline networks is utilized to analyze the leakage and filtering characteristics of metal-strip gratings. In particular, the modal transmission-line theory can serve as a template for computational algorithms that systematically evaluate the radiation effects that are not readily obtained by other methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1141-1146
• /
• 1993

The problem of tension control in metal-strip processing line is discussed. A new mathematical dynamic model which relates tension change, motor-speed change and roll-gap change is developed. Through the computer simulation of this model, parameter sensitivity, the tension transfer phenominon, and static and dynamic characteristics of strip tension were studied. Guidelines are developed to help one selecting locations of the master-speed drive in multi-drive speed control for tension adjustment and reducing the effect of interaction between tension and roll gap control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.503-509
• /
• 1999

This paper proposes a new speed and tension control algorithm for multi-span continuous strip processing line. In this algorithm the speed reference of each roll is adjusted to make the output force follow the load balance reference using an outer loop controller in cascade. Using the information of the output force of the adjacent roll, it is shown that the strip tension between two rolls can be controlled as the desired value without tension sensor. An experimental set-up which consists of 4 driven and 3 measuring rolls is designed and built for the multi-span speed and tension control. The experimental result reveals conspicuous improvement of tension control performance by the proposed algorithm comparing to the conventional tension feedback controller.

• 한국정보통신학회논문지
• /
• 제23권6호
• /
• pp.740-747
• /
• 2019

본 논문에서는 WLAN과 WiMAX 대역에서 동작 가능하도록 삼중대역 안테나를 설계 제작 및 측정하였다. 마이크로스트립 선로를 사용하여 급전하였으며 패치면에 두 개의 분기된 선로를, 그리고 접지면에 사각슬릿을 삽입하여 삼중대역 특성을 갖도록 설계하였다. 그리고 임피던스 대역폭의 특성을 개선하기 위해 접지면에 수직 스트립 선로를 추가하였다. 제안된 안테나는 유전율 4.4 그리고 두께 1.0mm인 유전체 기판 위에 $18.0mm(W1){\times}37.3mm$ (L4+L5+L7) 의 크기로 설계되었다. 제작 및 측정 결과로부터 2.4/2.5 GHz에서는 480 MHz (2.32~2.80 GHz), 3.5 GHz 대역에서는 810 MHz (3.22 ~ 4.03 GHz), 그리고 5.0 GHz 대역에서는 1,820 MHz (5.05 ~ 6.87 GHz)의 대역폭을 얻었다. 또한 측정된 3D 방사패턴을 제시하였으며 요구되는 주파수 대역에서 측정된 이득값을 제시하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.180-183
• /
• 2003

In this research, on-line model for prediction of effective strain distribution hi strip on finishing mill process is prescribed. It has been developed using several selected non-dimensional parameters and previously made average effective strain model via series of finite element process simulations, $\Delta$$\varepsilon$ was introduced to describe the effective strain distribution in strip. To confirm adequate non-dimensional variables uniqueness test was done. And to decide the order of polynomial in on-line model equation tendency test for each variables was done. The prediction accuracy of the proposed model is examined through comparison with finite element calculation results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.329-335
• /
• 2004

An, FE-based, on-line model is presented for the rapid and precise prediction of roll thermal profile in hot strip rolling. The validity of the model is demonstrated through comparison with FE-based off-line model which was verified by measurements. Also demonstrated is its capability of reflecting the effect of diverse process variables.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.111-118
• /
• 1999

This article describes the basic engineering concepts to be considered in the application of an induction heating furnace in the hot-dip galvanizing line. Experience in the Dongkuk project in Pohang, has shown that this arrangement has many advantages over the conventional method of using a combustion-gas heated furnace. Investment and operating costs are lower, the line length is much shorter, line operation is more convenient, air pollution is reduced, and the coated strip at of top-quality. As these benefits become well known, it is anticipated that the concept of induction heating will be more widely used in both new and revamped process lines. Induction heating is suitable for the production of Commercial Quality hot galvanized coils. More research is required to extend the present concept to the production of higher forming grades such as Drawing, Deep Drawing and Extra Deep Drawing Quality steels. A combination of induction heating and combustion-gas heating may lead to the way to the processing of these qualities of strip.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.435-438
• /
• 1988

The purpose of this study is to evaluate the discontinuity effects of two kinds of transmission lines. i.e. the strip line and the microstrip line which are popular transmission structures.