• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.289-300
• /
• 2000

Stretchable textile materials are getting more widely used in clothing industry. Among others are two obvious reasons which make it so desirable to young female customers, i.e., better confort with motion and more closely fitted silhouette. But these two points cannot get along well always. If a manufacturer try hard to make his products too closely fit, then the products are even less comfortable than made of non-stretchable material. On the other hand, if a stretchable garment are developed to be too comfortable with plenty of size tolerance. it cannot attract customers who are looking for something closely fit. So the study was aimed to investigate appropriate size tolerances.

• Fashion & Textile Research Journal
• /
• v.6 no.4
• /
• pp.485-491
• /
• 2004

The purpose of this study is to analyze the wearing fitness of middle aged women's jacket with non-Stretchable Fabric and stretchable fabric. We surveyed the size of jackets and process of pattern making with stretchable fabric in companies which produce the clothing mainly for middle aged women. Based upon the result of process of pattern making, two kind of experimental jacket with non-stretchable and stretchable fabric were made. We measured space length between body and garment using 3D scanner and analyzed the clothing pressure 7 parts of body with 3 kinds of arm raising. The result were as follows : 1. Most parts of space length except bust were higher in non-stretchable jacket than in stretchable jacket. 2. Clothing pressure showed greater value with non-stretchable fabric jacket than with stretchable fabric jacket. Clothing pressure in upper arm point areas increased as the angle of the arm raising increased. Therefore, the sleeve width and armhole depth should he considered when the amount of wearing ease were reduced in jacket with stretchable fabric.

• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.265-275
• /
• 2007

The purpose of this study is to analyze the ease of stretchable jackets which has been common since the mid-1990s and the whole actual conditions in making the lining fabrics. This can be done by investigating the actual conditions of domestic clothes businesses about the consumers. The outcomes of this study are as follows; The result of the survey in the differences of the ease between regular and stretchable fabrics shows that the pattern of designing stretchable fabrics needs diminishing the width of shoulder is 0.42cm, the whole girth chest is 1.83cm, the whole girth of waist is 0.88cm. It also shows that designing the ease of the whole girth of chest is 1.91cm to 2.54cm in the regular lining fabrics and is from 0 to 1.27cm in the stretchable fabrics more than the right side of fabrics. The ease of the whole girth of waist is similar to the round chest, in which the bottom sweep for garment is almost equal to the right side of fabrics in both regular lining fabrics and stretchable fabrics. The result of investigating the actual conditions of making the lining fabrics of stretchable jacket fabrics shows that 80% of a woman's wear brand produces and gives the pattern of the lining fabrics only for the special designing to the cooperative clothes manufactures. The business which always provides the patterns for the lining fabrics in the main office is only limited to 20%. Also, it shows that using the lining fabrics of stretchable jacket fabrics and regular lining fabrics together is 46.7%, the stretchable lining fabrics is 40% and the regular lining fabrics is 13.3% only.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1038-1052
• /
• 2007

The purpose of this study is to analyze present the pattern making of the lining fabrics calculating the right ease and rising quantities of arm-hole when the pattern of the lining fabrics of stretchable jacket fabrics is produced. The outcomes of this study are as follows. The right ease of lining fabrics was not room of 0cm as patterns being same the right side of fabrics in the girth of the chest, waist, and the edge of a garment and gets the most excellent valuation, and then the girth of the chest, and waist was applied to 2cm and around the edge of a garment 0cm in regular lining fabrics. In addition to, although the ease of patterns of the lining fabrics was more, it was not necessarily to satisfy. The result of the valuation according to the quantities of rising arm-hole of the pattern of the lining fabrics showed that the making lining fabrics that the quantities of rising arm-hole was 0.8cm in the body and 1.2cm in the sleeve in the both the stretchable fabrics and regular lining fabrics was the most excellent thing, and then 0cm in the body and 2cm in the sleeve, and then 0cm in the body and 0cm in the sleeve. The valuation of external appearance on the quantities of rising arm-hole was recognized similarly because of being rarely significance level, but around the chest and waist was recognized as being significance level in wearing satisfaction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.969-980
• /
• 2003

The aim of the study is to develop a jean jacket and pants of easy-to-move for schoolgirls of 11 years old. The research was carried out as follows; 1. Using a manufacturer's pattern, a jean jacket and pants were made. 2. Based on the survey of 108 schoolgirls, interviews with 4 designers of children's wear, and wearing test, three trial garments were developed. -Certain areas such as knee, elbow, and hip should be altered to have better extensibility. -The weight of the garment would be better to be reduced. 3. Three trial garments were developed using following techniques, which were found in fashion magazines for kids very often. -Alter the location and the shape of the seam line so that the areas mentioned above can adjust the movement of the body better. -Match stretchable material at the areas which require better extensibility. -Use various trimmings to make the garment more size adaptable and easy-to-move. 4. These garments were tested by 26 schoolgirls, and they answered the questionnaires focused on the design preference and easy-to-move. 5. From the results of the wearing test of three trial garments, more effective techniques were selected. Using these techniques, prototype garment was developed. The prototype garment was approved by the wearing test of 26 schoolgirls.

• Korean Journal of Human Ecology
• /
• v.23 no.4
• /
• pp.665-680
• /
• 2014

The purpose of this study was to develop the construction process of orthopedic compression garments (OCG) for balancing of the left and right lumbar muscle power and strength to prevent low back pain. One male subject having low back pain was involved for investigating of the lumbar muscle power. EMG (Telemyo DTS2, Noraxon, U.S.A) was measured with/ without 3 types of waist assistant belt around the waist area of the subject. Based on the electromyogram value of left and right body, OCG were constructed as follows. Firstly, stretchable t-shirts type with supportive waist belt was selected for the convenience of wearing and laundering the OCG. The design lines of the front and back waist parts were created depending on the anatomy of the torso. Secondly, 3D pattern was developed using 3D Clo, RapidForm XOR, 2C-AN, and Yuka CAD program to increase the fit of the OCG. Finally, stretchable power-net was layered as linings in two ways, a single lining and double layered linings, and evaluated measuring lumbar muscle EMG by five subjects with low back pain. As the results, they were effective to balance the left and right lumbar muscle power and strength. Also the OCG with the double layered power-net lining was superior to the one layered lining in terms of fit and comfort.

• Science of Emotion and Sensibility
• /
• v.20 no.3
• /
• pp.141-150
• /
• 2017

The purpose of this study was to analyze the effect of the shape and attached position of E-textile-based stretchable sensors on motion-sensing performance and to investigate the requirements for the optimal structure of clothes for sensing limb motions. An experimental garment was prepared with different sensor shapes, and attachment positions. A child subject, wearing the experimental garment, performed arm and leg bending and extension motions at $60^{\circ}$, $90^{\circ}$ and $120^{\circ}$ motion angles, at a rate of 60 deg/sec. The changes in voltage triggered by the stretching and contracting of the fabric-sensor were measured, and an acceleration sensor was utilized to verify that the experimental motions were correctly performed. Dummy arms and legs of a child were manufactured to perform an identical test, in order to compare the dummy results with the actual human body experiment results. The analysis showed that the reproducibility and reliability of the rectangular sensor, showing uniform and stable were higher than those of the boat-shaped sensor, in both the dummy and the human body experiments. The attachment position of the sensor was more reproducible and reliable when placed on 4 cm below the elbow and knee joints in the dummy test, when placed in the joints of the elbow and knee, in children experiment. The appropriate shapes and attached positions of the sensor for sensing the motions were analyzed, and the results proved that motion-sensing of the human body is possible by utilizing flexible fabric-sensors integrated into clothes.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• International Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.37-52
• /
• 2006

This study was designed to analyze the three-dimensional shapes of Hanbok Chima made with various fabrics and to clarify the relationship between fabric properties as well as the objective and subjective evaluations of the 3D shape. For 3D shape data, a dress form (9A2 (N; nude)) was scanned with eight Chima garments made with the same number of fabrics. The scanner used was a non-contact three-dimensional human body measuring system belonging to Bunka Women's University in Japan. Data concerning the objective evaluation of the 3D shape was obtained from the measurements of the vertical and horizontal sections: those for subjective evaluation were through the sensory test after exposure to photographs from a front and side view. Four fabric factors were extracted from fabric physical properties: softness, extension, thickness of threads, and weight of fabric. Such factors as expansion (volume), sag of rear train, shape of nodes were influential in explaining the 3D shape of Hanbok Chima. From the analysis of the 3D shape, it can be deduced that with the constituent fabric stiffer, lighter, and less stretchable, the more expanded the 3D shape appeared to be. Multiple regression results showed that vertical shape factors have a greater effect on the evaluation of the 3D shape. It also implies that dependent variables of this study such as the subjective evaluation and 3D shape can be derived from regression equations on independent variables as fabric property factors or 3D shape factors. These results can enable the manufacturers to predict the 3D shape of the garment as well as the human subjective assessment to improve the efficacy of production. The investigation method proposed in this study can also be applicable to other garment items.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.129-138
• /
• 2021

This study aimed to determine the effects of the shape and attachment position of stretchable textile sensors coated with carbon nanotube on their performance when used to measure children's joint movements. Moreover, the child-safe requirements for fabric motion sensors are established. The child participants were advised to wear integrated clothing equipped with the sensors of various shapes (rectangular and boat-shaped) and attachment positions (at the knee and elbow joints or 4 cm below the joints). The voltage change induced by the elongation and contraction of the fabric sensors was determined for arm and leg flexion-extension motions at 60 deg/s (three measurements of 10 repeats each for 60°and 90°angles, for a total of 60 repetitions). Their dependability was determined by comparing the fabric motion sensors to the associated acceleration sensors. The experimental results indicate that the rectangular-shaped sensor affixed 4 cm below the joint is the most effective fabric motion sensor for measuring children's arm and leg motions. In this study, we designed a textile sensor capable of tracking children's joint motion and analyzed the sensor shape and attachment position on motion sensing clothing. We demonstrated that flexible fabric sensors integrated into garments may be used to detect the joint motions of the human body.