• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.453-458
• /
• 2011

We study the effect of mechanical machining and heat treatment on the surface residual stress of TP 316L stainless steel. Electrical discharge machining (EDM), milling and grinding were applied to TP 316L plate specimens. The residual stress and hardness were measured and the effect of heat treatment on the surface residual stress was examined. The residual stress was measured by the X-ray diffraction method, which showed that the surface residual stress was related only to the stress magnitude and was independent of the compressive or tensile component. The surface residual stress was greatly decreased by the heat treatment, but it was not removed completely.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.146-152
• /
• 1997

Development of shoot and root, leaf water potential and photosynthetic rate affected by water stress in early growing stage of tobacco were surveyed to interpret stress response in terms of plant physiological and agricultural aspects. The growth of shoot and root was highly suppressed by water stress and the difference in dry weight by rewatering was smaller in root than in shoot. The total root length was highly decreased by water stress and the lengths of root for water stress and non-stress were 74m and 84m, respectively, after rewatering. The root growth treated by water stress was increased between 2nd and 3rd day after treatment indicating that temporary water stress at early growing stage might have increased of root zone activity for early growth stage. The leaf water potentials were decreased to -7.63MPa, -9.47MPa, -11.89MPa, -13MPa at the 2nd, 3rd, 4th and 5th day by water stress. The relative water contents were 75%, 62% and 57% at the 3rd, 4th and 5th day after treatment. Photosynthesis was reduced largely by water stress. The photosynthetic rate after treatment at 2nd day and 3rd day was dropped to 18.15$\mu$mol. $CO_2$/$m^2$ㆍsec$^{-1}$ and 9.35$\mu$mol. $CO_2$/$m^2$ㆍsec$^{-1}$. It was never recovered to the normal, even after rewatering. Stomatal conductance had been reduced since 2nd day after treatment and increased after rewatering.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.1
• /
• pp.10-19
• /
• 2008

To investigate the effect of ultrasonic nano-crystalline surface modification (UNSM) treatment on rolling contact fatigue and residual stress properties of bearing steels, this paper carried out a rolling contact fatigue test, measured residual stress and retained austenite, performed a wear test, observed microstructure, measured micro hardness, and analyzed surface topology. After the UNSM treatment, it was found that the surface became minute by over $100{\mu}m$. The micro surface hardness was changed from Hv730~740 of base material to Hv850~880 with about 20% improvement, and hardening depth was about 1.3 mm. The compressive residual stress was measured as high as -700~-900 MPa, and the quantity of retained austenite was reduced to 27% from 34%. The polymet RCF-6 ball type rolling contact fatigue test showed over 4 times longer fatigue lifetime after the UNSM treatment under 551 kgf load and 8,000 rpm. In addition, this paper observed the samples, which went through the rolling contact fatigue test, with OM and SEM, and it was found that the samples had a spalling phenomenon (the race way is decentralized) after the UNSM treatment. However, before the treatment, the samples had excessive spalling and complete exploration. Comparison of the test samples before and after the UNSM treatment showed a big difference in the fatigue lifetime, which seems to result from the complicated effects of micro particles, compressive residual stress, retained austenite, and surface topology.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.3
• /
• pp.141-147
• /
• 2003

The effects of heat treatment on the fatigue life and welding residual stress of welded plates were investigated in this study. The plates were welded by flux cored arc welding process, and post weld heat treated at $600^{\circ}C$ for 1 hour. The residual stresses of welded plates before and after post weld heat treatment were measured by hole drilling method. To measure the fatigue life of welded plates, low cycle fatigue tests under strain control and high cycle fatigue tests under load control were performed respectively, by using cylindrical specimens containing weld metal and heat affected zone. The obtained result shows that the post weld heat treatment reduces the residual stress, and resultantly changes the fatigue life of welded plate. Goodman diagrammatic analysis has also been performed to study the effect of post weld heat treatment on the high cycle fatigue life.

• BMB Reports
• /
• v.35 no.4
• /
• pp.409-413
• /
• 2002

Thioltransferase, also known as glutaredoxin, is an enzyme that catalyzes the reduction of a variety of disulfide compounds. In Schizosaccharomyces pombe, two thioltransferases were reported and the cDNA of one of the thioltransferases (thioltransferase-1) was cloned. Using a Northern blot assay, we investigated the thioltransferase transcription in response to various stress conditions. When the culture was shifted to a high temperature, the thioltransferases transcription was not significantly changed compared to the unshifted $30^{\circ}C$ culture. Treatment of zinc chloride to exponentially-growing cells remarkably increased the thioltransferase transcription, whereas the treatment of mercury chloride greatly reduced the transcription. Treatment of hydrogen peroxide and cadmium chloride caused no significant effects on the transcription of the thioltransferase. These results suggest that the transcription of thioltransferase-1 in S. pombe is induced in response to metal stress that is caused by zinc chloride, but not in response to heat stress or oxidative stress that is caused by hydrogen peroxide.

• Journal of Plant Biotechnology
• /
• v.30 no.2
• /
• pp.201-206
• /
• 2003

Differential responses of red pepper plant and cultured cells to enhanced ${\gamma}$-ray($^{60}$ Co) and ultraviolet(UV) stress were investigated. In seed treatment, 1 Gy of ${\gamma}$-ray increased seedling dry weight up to 19.1%, but 50 Gy treatment markedly ingibited seed germination and subsequent growth of seedling. UV treatment to seed did not change the germination ability of seeds and the growth of seedlings regardless of duration of UV treatment until 24 hrs. In case of UV treatment to seedlings, plant injury was seriously progressed even after the seedlings were returned to no UV condition, and eventually all the leaves showed chlorosis by the stress. However, progress of plant injury by ${\gamma}$-ray stress slower than that caused by UV stress, and even at the high dose of ${\gamma}$-ray 50 Gy, did not caused the cholrosis of stressed plant leaf. Amount of electrolytes leakage from plant leaf by UV treatment for 24hrs was increased up to 28.8 folds in comparison with untreated control, whereas that of 50 Gy of ${\gamma}$-ray was increased only 1.2 folds. UV stress induced the production of capsidiol, antimicrobial phytoalexin, by activation of gene expression involved in capsidiol biosynthesis, such as sesquiterpene cyclase and cyclase and cytochrome P450 hydroxylase in the leaf and cultured cell, but ${\gamma}$-ray stress induced neither the production of capsidiol nor expression of the genes.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.337-341
• /
• 2013

The effects of gypenosides (GPS) on electric footshock (EF)-induced acute stress in mice were investigated. Mice were treated orally with GPS (30-400 mg/kg) once a day for 5 days. After 2 days of GPS treatment, mice were exposed to EF stimuli (intensity, 2 mA; interval, 10 s; duration, 3 min) for acute stress for 3 days. Spontaneous locomotor activity was increased by acute EF stress, which was decreased by treatment with GPS (100 and 400 mg/kg). In addition, the increased levels of dopamine and serotonin by acute EF stress in the brain were reduced by treatment with GPS (100 and 400 mg/kg). The serum levels of corticosterone increased by acute EF stress were also reduced by GPS (100 and 400 mg/kg). These results suggest that GPS shows the ameliorating effects on acute EF stress by modulating the activity of dopaminergic and serotonergic neurons, and the serum levels of corticosterone. Clinical trials of GPS need to be conducted further so as to develop promising anti-stress agents.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.2
• /
• pp.147-158
• /
• 1996

Generally, analytical consideration on the behaviour of metallic structures during quenching process, and analysis on the thermal stress and deformation after heat treatment are very important in presumption of crack and distorsion of quenched material. In this study a set of constitute equations relevant to the analysis of thermo elasto-viscoplastic materials with strain hysteresis during quenching process way presented on the basis of contimuum thermo-dynamics mechanics. The thermal stresses were numerically calculated by finite element technique of weighted residual method and the principle of virtual work. In the calculation process, the temperature depandency of physical and mechaniclal properties of the material in consideration. On the distribution of elasto-viscoplastic thermal stresses according to radial direction, axial and tangential stress are tensile stress(50MPa, 1.5GPa and 300MPa) in surface and compressive stress(-1.2GPa, -1.14GPa and -750MPa) in the inner part on the other hand, radial stress is tensile stress(900MPa) in area of analysis. According to axial direction, tangential stress gradients are average 60MPa/mm on the whole. The reversion of stress takes place at 11.5 to 16.8mm from the center in area of analysing.

• The Journal of Korean Physical Therapy
• /
• v.2 no.1
• /
• pp.65-74
• /
• 1990

This study was carried out to measure the degree of work-related stress and to identify factors influencing the excessive stress among clinical physical therapists. One thousand and five physical therapists surveyed nationwide met the established criteria for inclusion in the study. The respondents were an average age of 27.1 years, $34.5\%$ were married, and $61.2\%$ were female. Most of the respondent $(48.1\%)$ worked in local clinics. The average stress score was 50.9. Analysis-of-variance test demonstrated significant difference in the degree of stress among treatment facilities. There was a significant relationship between treatment facilities (general hospital, local hospital, clinic), number of patients treated per day, job satisfaction, low back pain and work-related stress, respectively. Work-related stress was unrelated to matters of sex, marital status, education. Hospital administrators, physical therapydirectors, directors, and individual therapists should work within their organizations to reduce work stress and its detrimental effects. Further research is necessary to investigate preventive measures to decrease the work-related stress.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.35 no.4
• /
• pp.105-120
• /
• 2022

Objectives: The purpose of this study is to investigate the perception of Korean Medicine (KM) doctors toward infertility treatment evaluation tools and develop a standard evaluation tool for mental and physical function improvement following Korean medicine treatment. Methods: An online survey (Moaform) was conducted, and responses were analyzed for members of the Society of Korean Medicine Obstetrics and Gynecology and KM doctors who participated in the 2021-2022 traditional Korean medicine treatment infertility support program in Gyeonggi-do. Results: In fertility treatment, the most effective indicators that KM doctors wanted to evaluate other than pregnancy and childbirth were reproductive health indicators, overall health improvement, and stress improvement (33.1%, 21.2%, 18.9%). Furthermore, 45.1% of the respondents had experience using the presented infertility stress evaluation tools. For each evaluation tool, 52.1% and 54.6% of the respondents answered that it 'does not reflect the changing circumstances of the times' and that there were 'too many questions'. As for the developing a standard evaluation tool for infertility treatment in KM, KM doctors expected a simple and clear tool focusing on the pregnancy rate. They also wanted the tool to include a reproductive health index, overall function improvement and stress improvements. Conclusions: The survey confirmed the need to evaluate indicators for reproductive health, mental health, and infertility stress in addition to pregnancy rate to assess the effectiveness of KM infertility treatment. It also confirms the necessity of developing an infertility stress evaluation tool with simplified questions that reflects the changing time.