• Journal of Ginseng Research
• /
• v.22 no.2
• /
• pp.102-113
• /
• 1998

This experiment used chlorophyll fluorescence techniques to assess the effect of irradiant during leaf development on photoinhibition of photosynthesis in Panax ginseng. Seedlings of p. ginseng were grown in the 91asshouse at four shade levels. The maximum mid-day irradiant in each treatment between emergence (January 4) and completion of the experiment (February 25) was 1220, 485, 235, 125 $\mu$mol/$\textrm{m}^2$/s. To assess the rapidity of photosynthetic readaptation to changes in light levels, fluorescence parameters (Fo, F, Fm, Fm', AF/Fm;, Fv/Fm) were measured for three days before and after transfer of plants (on February 21) from each light treatment into each of the other light treatments. Before transfer, dark adapted values of Fv/Fm in the 1220 (0.699) and 485 (0.739) treatments were different from each other and lower than values in the 235 (0.764) and 125 (0.768) treatments, indicating mild photoinhibition. Patterns of change in F during the day also differed between treatments, with low light treatments tracking irradiant levels, but F in the high light treatment (1220) declined in the morning, presumably due to fluorescence quenching. Although plants grown at high irradiant had relatively low photosynthetic efficiency, relative electron transport rate was greater than in lower irradiant treatments. After transfer, plants adopted the daily pattern of change in F of the treatment to which they were moved with little change in absolute levels of F, except in plants transferred from the highest (1220) to the lowest light level (125), where F increased over the course of the three days following transfer. After plants were transferred, Fm' converged on values similar to those in plants raised in the treatments to which they were moved. Values of Fv/Fm in plants moved from low to high light declined dramatically, but there was no decline in plants from 485 moved to 1220. Values of Pv/Fm in plants that were moved from high light to lower light increased to values above those recorded in plants raised in the lower light treatments. Reductions in quantum efficiency caused by photoinhibition at high irradiant may be more than compensated for by higher electron transport rates, although evidence suggests that under high irradiant this tends to be balanced by reduced leaf area and earlier senescence. Chlorophyll fluorescence techniques appear capable of indicating effects of irradiant induced stress in ginseng, yielding results comparable to those obtained with gas exchange techniques but in less time and with greater replication.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.217-228
• /
• 2014

The purpose of this study is to grasp inconveniences and improvements by examining wearing condition and satisfaction of protective clothing targeting 114 Korean farmers and to suggest basic data for enhancement of pattern and wearing satisfaction of protective clothing by understanding problems of pesticide-proof clothing through comparative analysis on the size of its commercial products. Most of male subjects were in charge of spraying pesticide, whereas female were most likely to play an assistant role to hold the hose of pesticide applicator. Both of female and male subjects were very aware of the harmful effect of pesticide on human body and tried to take off the clothes immediately after spraying it to reduce possible damage caused by pesticide. As a result of examining wearing condition, the farmers avoided wearing protective clothing because that it feels hot, stuffy, and uncomfortable to move. This hesitant response of wearing the clothing was not shown significantly in case of female subjects who play an assistant role for spraying. Although the farmers wore protective equipments such as mask or gloves in a proper way as compared to protective clothing, they seemed to choose alternative way rather than best way to block pesticide completely. The satisfaction regarding to the fitting of protective clothing which the subjects showed low in all items of upper-lower clothes except waistline. It is necessary to improve the functionality such as relief from heat stress and convenience for movement rather than design or economic in protective clothing development. As a result of comparing the size of five kinds of commercial protective clothing, the farmers got confused to choose the product since designation method of size across companies showed a significant difference in an identical clothing size. In addition, the sizing system developed on a basis of a well-built man has become a hindering factor in wearing satisfaction of female farmers.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.173-181
• /
• 2004

To delay the onset of apoptosis in the culture, transformed Tn 5B1-4 cells harboring anti-apoptotic genes, bcl-2 and baculovirus p35, have been established and analyzed for their anti-apoptotic ability in suspension culture using spinner flasks. In the suspension culture at agitation speeds of 100 rpm and 200 rpm, the cell growth of cell clone expressing Bcl-2 protein was much higher than other two clones and the maximum cell density of the clone was 6.0 ${\times}$ 10$^{6}$ cells/ml and 6.2 ${\times}$ 10$^{6}$ cells/ml at day three of the incubation. On the other hand, the cell growth of cell clone expressing baculovirus protein P35 was much higher than other two clones in suspension culture at agitation speed of 300 rpm and the maximum cell density of the clone was 6.1 ${\times}$ 10$^{6}$ cells/ml at day three of the incubation. Based on the pattern of genomic DNA laddering and the microscopic observation of apoptotic bodies, the more apoptotic bodies are induced in Tn 5B1-4 control cell clone at higher agitation speed. This result shows that the shear stress can be a main factor in inducing apoptosis in spinner flask culture. At low agitation speed, cell clone expressing Bcl-2 was more effective in delaying the onset of apoptosis than the cell clone expressing P35. On the other hand, at high agitation speed, cell clones expressing baculovirus P35 was more effective in delaying the onset of apoptosis than the cell clone expressing Bcl-2. Therefore, anti-apoptotic genes, bcl-2 and baculovirus p35, can playa distinct role depending on agitation speed in the suspension culture.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.599-608
• /
• 1997

We studied on change of lens accommodation and pupil light reflex caused by VDT work in six women and compared them with those of other office works. The results were as follows. 1. In VDT work the accommodation contraction velocity decreased during the first 2-hr VDT task, then recovered markedly by the end of the one-hour lunch break, and decreased again by the end of the 2nd 2-hr VDT task. Changes of relaxation velocity showed similar pattern although it was less typical than that of contraction velocity 2. There was no marked change in accommodation contraction velocity and amplitude of accommodation in general office work and near-distance office work, and in the near-distance office work accommodation relaxation velocity decreased according to work load without recovery after lunch break. 3. Initial pupil diameter, initial pupil area of light reflex decreased significantly during VDT task only in VDT work and didn't recover after lunch break. These results suggest possibility that changes of accommodation contraction velocity, accommodation relaxation velocity, near point distance, and pupil diameter and area are useful in evaluating characteristics of VDT work. For this, more research adjusted individual differences, circadian rhythm, emotional stress needs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.499-508
• /
• 2016

Injection molding is a method for manufacturing many products, wherein a plasticized resin is injected into a mold at high pressure and hardened. According to the method, the product can be manufactured into various forms, and the mass production of up to tens of thousands of products is possible. The purpose of this study was to determine the process conditions for manufacturing a door latch for automobiles, through an analysis of the injection molding method. To calculate an appropriate injection flow for injection molding, a primary analysis for comparing the injection time, pressure, flow pattern, consolidation range, shear stress, shear rate, and weld line, as well as a secondary analysis for determining the conditions for stabilizing the molding temperature, holding pressure, and cooling process, were conducted. The characteristics of injection molding, and their influence on the product quality are discussed. No weld line and pores were observed on the products that had been manufactured based on the process conditions determined above. In addition, there were no flaws regarding the deformation compared to the prototype. Therefore, the manufacture of a product under the conditions determined in this study can reduce the defect rate compared to the existing production, and the process is also more competitive due to reduced production time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1523-1528
• /
• 2007

The feeding effects of mugwort (Artemisia vulgaris L.) extracts (ME) on the anti-oxidative actions of ICR mouse skin was investigated. To study the antioxidative effects of ME on ICR mouse skin, female ICR mice were grouped into basic diet group (control), ascorbic acid diet group (AA-2.5, AA-5.0, AA-10.0 and AA-20.0 mg/kg BW/day) as a positive control and experimental diet group (mugwort extract; ME-25, ME-50, ME-100, and ME-200 mg/kg BW/day) and fed for 10 weeks. Protein contents in ME-50, ME-100, and ME-200 feeding group were increased ($3.1%{\sim}11.1%$) and hydroxyl radical contents were significantly decreased ($10.4%{\sim}17.4%$) compared to control group. Oxidative stress signals and oxidized protein contents were significantly reduced to the range of 15.3 to 17.1% in ME-100 and ME-200 groups. Also, superoxide dismutase (SOD) activity was significantly increased to the range of 15.0% to 23.3% in ME-100 and ME-200 groups. Catalase activities were significantly increased ($14.0%{\sim}36.9%$) in all groups in a dose-dependent pattern. Antioxidative ability of ME showed similarity to that of ascorbic acid.

• Journal of Oral Medicine and Pain
• /
• v.31 no.1
• /
• pp.91-99
• /
• 2006

This study was performed to investigate about sleep quality and orofacial pain pattern between experimental and control group. 101 subjects with temporomandibular disorders without any psychologic and neurologic problem were selected from the patients presented to Wonkwang University dental hospital. Routine clinical examination for TMD was carried out, especially for the frequency of headache and the craniocervical muscles were also done by the author in the first visit. All the subjects filled out the questionnaires, that was, for the evaluation of sleep quality using Pittsburgh sleep quality index(PSQI), and for the analysis of behavioral pain scale questionnaires. Data obtained were statistically processed by the SPSS Windows program and the results of this study were as follows: 1. Subjective sleep index, sleep latency, sleep disturbance, global score in control group were significantly lower than 2. Subjective sleep index, sleep disturbance, global score in subject with headache were significantly lower than subject without headache(P<0.05). 3. Medicine taker have sleeping drug. Caffeine drinkers was significantly higher in daytime dysfunction, global score than no drinker. 4. It have more frequent head and neck pain, pain spreading, daily life difficult in poor sleeper than good sleeper.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.174-182
• /
• 2018

Background: In this study, we observed their growth and physiological responses using a variety of duty ratio under the mixed light using red, blue, and white lights. The red+blue mixed light was treated with 95%, 90%, 85%, 80%, and 75% duty ratios and red+blue+white mixed light with 85% and 70% duty ratios. We examined the width and length of leaves, total number of leaves, and number of shoots to examine their growth responses. The physiological responses were studied by measuring their photosynthetic rate, transpiration rate, stomatal conductance, water use efficiency, chlorophyll content, and fluorescence ($F_o$, $F_m$, and $F_v/F_m$). Results: We found that lower duty ratio caused the length and width of the leaves to grow longer under red+blue mixed light but that it did not cause any difference in the red+blue+white mixed light condition. In addition, there was no difference in the number of leaves and shoots among all treatments. In the red+blue mixed light condition, the photosynthetic rate was no difference, but both transpiration rate and stomatal conductance were the highest at 95% duty ratio than in other ratios. Water use efficiency pattern was similar to that of photosynthetic rate; water use efficiency was no difference. Chlorophyll content was the highest at 95% duty ratios, and it was the least at 90%, 85%, and 75% duty ratio. $F_o$ and $F_m$ values were relatively high at 85% and 80% duty ratio and low at 90% duty ratio while $F_v/F_m$ showed no difference. Conclusions: Under the red+blue+white mixed light, all physiological items showed no difference between 70 and 85% treatments. But, photosynthetic rate, water use efficiency, chlorophyll content, and $F_v/F_m$ were relatively greater in the red+blue+white mixed light than in the red+blue mixed light. Therefore, red+blue+white mixed light treated with 70% duty ratio could lessen the environmental stress and save more power when cultivating Silene capitata in a plant factory.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.87-92
• /
• 2019

In this paper, we have verified a low-voltage EM(elasto-magnetic) sensing technique for tensile force management of PSC(prestressed concrete) internal tendon in order to apply the technique to actual construction sites where stable power supply is difficult. From observation of past domestic and overseas PSC structural accident cases, it was found that PS tension is very important to maintain structural stability. In this paper, we have tried to measure the tensile force from a magnetic hysteresis curve through EM sensors according to voltage value by using relation between magnetostriction and stress of ferromagnetic material based on elastic-magnetic theory. For this purpose, EM sensor of double cylindrical coil type was fabricated and tensile force test equipment for PS tendon using hydraulic tensioning device was constructed. The experiment was conducted to confirm relationship between changes of permeability and tensile force from the measurement results of the maximum / minimum voltage amount. The change of magnetic hysteresis curve with magnitude of tensile force was also measured by reducing amount of voltage step by step. As a result, the slope of estimation equation in accordance with magnitude of magnetic field decreases with the voltage reduction. But it was confirmed a similar pattern of change of magnetic permeability for the magnetic hysteresis loop. So, in this study, it is considered that it is possible to manage the tensions of PSC internal tendon using EM sensing technique in low-voltage state.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.77-84
• /
• 2021

In this study, flexural tests of prestressed high strength spun concrete (PHC) piles reinforced with infilled concrete and longitudinal rebars were conducted, where the longitudinal rebar ratio and the presence of sludge formed on the inner surface of PHC pile were set as key test variables. A total of six PHC pile specimens were manufactured, and their flexural behaviors including failure mode, crack pattern, longitudinal strain distribution in a section and end slip between external PHC pile and infilled concrete were measured and discussed in detail. The test results revealed that the flexural stiffness and strength increased as the longitudinal rebar ratio became larger, and that the sludge formed on the inner surface of PHC pile did not show any detrimental effect on the flexural performance. In addition to the experimental approach, this study presents a nonlinear flexural analysis model considering compatibility conditions and strain and stress distributions of the PHC piles and infilled concrete. The rationality of the nonlinear flexural analysis model was verified by comparing it with test results, and it appeared that the proposed model well evaluated the flexural behavior of PHC piles reinforced with infilled concrete and longitudinal rebars with a good accuracy.