• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.135-142
• /
• 2021

This study provided a new research perspective for processing and analyzing AE data to evaluate rock failure. Cluster method and information entropy theory were introduced to investigate temporal and spatial correlation of acoustic emission (AE) events during the rock failure process. Laboratory experiments of granite subjected to compression were carried out, accompanied by real-time acoustic emission monitoring. The cumulative length and dip angle curves of single links were fitted by different distribution models and distribution functions of link length and directionality were determined. Spatial scale and directionality of AE event distribution, which are characterized by two parameters, i.e., spatial correlation length and spatial correlation directionality, were studied with the normalized applied stress. The entropies of link length and link directionality were also discussed. The results show that the distribution of accumulative link length and directionality obeys Weibull distribution. Spatial correlation length shows an upward trend preceding rock failure, while there are no remarkable upward or downward trends in spatial correlation directionality. There are obvious downward trends in entropies of link length and directionality. This research could enrich mathematical methods for processing AE data and facilitate the early-warning of rock failure-related geological disasters.

• Corrosion Science and Technology
• /
• 제22권4호
• /
• pp.297-303
• /
• 2023

This study aimed to evaluate hydrogen permeation behaviors of pre-strained twinning-induced plasticity steel with or without Zn coating using electrochemical permeation technique. In contrast to un-strained and 30% strained samples, permeation current density was measured in the 60% strained sample. Tensile pre-straining at 60% involved microstructural modifications, including a high level of dislocation density and stacking fault with a semi-coherent twin boundary, which might provide a high diffusion path for hydrogen atoms. However, reproducibility of measurements of hydrogen permeation current was low due to non-uniform deformation and localized stress concentration. On the other hand, the permeation current was not measured in pre-strained TWIP steel with Zn coating. Instead, numerous blisters with some cracks were observed on the surface of the coating layer. In locally damaged Zn coating under tensile straining, hydrogen atoms could relatively easily permeate through the coating layer. However, they were trapped at the interface between the coating layer and the substrate, which might delay hydrogen penetration into the steel substrate.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.253-270
• /
• 2013

본 연구에서는 파쇄대의 공간적 분포 특성이 터널의 거동에 미치는 영향에 대한 내용을 다루었다. 이를 위해 발파굴착 공법이 적용되는 터널을 대상으로 다양한 파쇄대 조건을 도출하고 이에 대한 2차원 및 3차원 해석을 수행하여 파쇄대의 주향 및 경사, 터널과의 이격거리, 토피고, 측압계수 등에 대한 매개변수 연구를 실시하였다. 해석결과를 토대로 매개변수 조건에 대한 터널 변위 및 지보재 부재력의 변화경향을 고찰하였으며 그 결과 파쇄대의 경사각 및 주향에 따라 터널의 변위 및 지보재 부재력에서 큰 차이를 보였으며 전반적으로 터널의 심도가 깊어질수록 그리고 초기측압계수가 클수록 파쇄대의 공간적 분포 특성에 따른 터널 거동의 차이가 더 심화되는 것으로 나타나 대심도 터널의 경우가 저심도 터널에 비해 파쇄대의 영향이 가중될 수 있는 것으로 검토되었다.

• Molecules and Cells
• /
• 제44권10호
• /
• pp.770-779
• /
• 2021

Transgenic Arabidopsis thaliana expressing an anti-rabies monoclonal antibody (mAb), SO57, was obtained using Agrobacterium-mediated floral dip transformation. The endoplasmic reticulum (ER) retention signal Lys-Asp-Glu-Leu (KDEL) was tagged to the C-terminus of the anti-rabies mAb heavy chain to localize the mAb to the ER and enhance its accumulation. When the inaccurately folded proteins accumulated in the ER exceed its storage capacity, it results in stress that can affect plant development and growth. We generated T₁ transformants and obtained homozygous T₃ seeds from transgenic Arabidopsis to investigate the effect of KDEL on plant growth. The germination rate did not significantly differ between plants expressing mAb SO57 without KDEL (SO plant) and mAb SO57 with KDEL (SOK plant). The primary roots of SOK agar media grown plants were slightly shorter than those of SO plants. Transcriptomic analysis showed that expression of all 11 ER stress-related genes were not significantly changed in SOK plants relative to SO plants. SOK plants showed approximately three-fold higher mAb expression levels than those of SO plants. Consequently, the purified mAb amount per unit of SOK plant biomass was approximately three times higher than that of SO plants. A neutralization assay revealed that both plants exhibited efficient rapid fluorescent focus inhibition test values against the rabies virus relative to commercially available human rabies immunoglobulins. KDEL did not upregulate ER stress-related genes; therefore, the enhanced production of the mAb did not affect plant growth. Thus, KDEL fusion is recommended for enhancing mAb production in plant systems.

• 지질공학
• /
• 제26권1호
• /
• pp.101-115
• /
• 2016

관정의 시멘팅 재료로 사용될 수 있는 두 시멘트 물질(KS-1 보통 포틀랜드, Class G)의 물/고체(고체=시멘트) 중량비와 첨가제인 비산재의 부피함량 변화에 따른 이들 물질들의 물리역학적 물성 변화를 파악하기 위해 실내물리역학실험을 실시하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체(고체=시멘트) 중량비를 변화시키며, Class G 시멘트의 경우 물/고체(고체=비산재+시멘트)을 고정한 채 비산재:시멘트의 부피비를 변화시키며 시료를 제작하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체 중량비가 증가할수록, Class G 시멘트의 경우 비산재의 함량이 증가할수록, 공극률 증가, 밀도감소, 음파속도(P, S파) 감소. 탄성상수(영율, 포아송비) 감소, 압축 및 인장강도 저하, 열전도도 감소, 비열 증가의 경향을 보였다. 또한 구속압(σ₃)의 증가와 비산재 함량의 증가는 재료의 소성파괴거동을 초래하였다. 이 실내실험결과를 이용하여, 여러 주입공 페라미터(케이싱, 시멘트층의 두께, 주입압, 주입공 경사방향 및 경사각, 주입공 심도)등을 변화 시키면서, 시멘트층의 안정성 분석을 실시하였다. 분석결과 낮은 주입압과 경사정 혹은 수평정에서는 시멘트층이 안정하였으나, 다른 조건에서는 시멘트층에서 주로 인장파괴가 관찰 되었다.

• 비파괴검사학회지
• /
• 제31권5호
• /
• pp.487-493
• /
• 2011

비표지 방식의 압전 마이크로캔틸레버 질량센서를 이용하여 간세포암의 혈청표지물질인 알파태아단백(alpha fetoprotein, AFP)을 정상 농도인 10 ng/ml까지 정량적으로 검출하였다. 압전 마이크로캔틸레버 질량센서는 캔틸레버의 질량변화에 의하여 센서의 공진주파수가 변화되는 원리를 이용하여 센서에 붙은 물질의 질량을 측정하며, 센서의 공진주파수는 컨덕턴스 스펙트럼을 이용하여 전기적으로 측정한다. 제작된 센서는 공진 주파수가 약 1.34 MHz, 질량 민감도가 약 175 Hz/pg이며 단백질이 붙을 때 캔틸레버의 표면 스트레스 변화에 대한 센서의 공진 주파수 변화를 줄일 수 있도록 설계되어 질량센서로써 신뢰도를 높였다. 'Dip and dry' 방법으로 캔틸레버의 프로브 영역을 시약과 반응시켜서 AFP 항체를 고정화하고 AFP 항원을 검출하는 실험을 수행하였다. 10 ng/ml과 50 ng/ml농도의 항원에서 10분간 항원-항체 면역반응을 시켰을 때 센서에 검출된 항원의 질량이 각각 6.02 pg과 10.67 pg이다.

• 자원환경지질
• /
• 제13권3호
• /
• pp.141-158
• /
• 1980

A geologic structure could be formed through various processes, because there are a number of factors which control the deformation of the Earth's crust. In geology, we could call it geological epistemology to describe exactly a geologic structure, and call it geological logics to infer logically the deforming process through which the geologic structure had been formed. Degree of legitimacy of geological logics depends upon the degree of exactness of geological epistemology. This study described quantitatively 3-dimensional Hambaek Syncline through computer analysis, and examined qualitatively into its deforming mechanism based on the results of 3-dimensional analysis of the structure. Input data for the computer analysis are dips and dip directions of bedding planes of the structure. The Hambaek Syncline disclose a minor fold group of NE-SW or NNE-SSW trend and a large scale fold of E-W trend. The conclusions of this study are as follows: (1) The fold of E-W trend is primary fold $(F_1)$ and the minor fold group of NE-SW or NNE-SSW trend secondary fold $(F_2)$. (2) Hambaek Syncline is cylindrical type fold. (3) Apparent axial trace of Hambaek syncline does not coincide with true axial trace. The apparent axial trace is $N70^{\circ}-80^{\circ}W$ in Gohan and Sabuk area, and changes to $N70^{\circ}-80^{\circ}E$ in the westward of the area, while the true axial trace is $N40^{\circ}-70^{\circ}W$ in the former, and $N60^{\circ}-80^{\circ}E$ in the latter area. (4) Westward dipping of axial plane of the minor fold group of NE-SW or NNE-SSW trend can be attributed to simple shear movements along overthrusts. (5) Angle between axial trace and the directional trace of the maximum principal compressive stress $({\sigma}_1)$ may not be perpendicular each other. The angle between them is governed by the following factors; 1) the plunge of fold axis 2) the dip of axial surface 3) cylindrisity (6) The mean axial trace of Hambaek Syncline $(F_1)$ is $N45.6^{\circ}W$, and the directional trace of ${\sigma}_1$ is $N52.4^{\circ}E$ (7) The mean axial trace of the minor fold group of NE-SW or NNE-SSW trend $(F_2)$ is $N21^{\circ}E$, and the directional trace of ${\sigma}_1$ is $N22^{\circ}W$.

• 지질공학
• /
• 제29권1호
• /
• pp.1-12
• /
• 2019

지진은 진원지 주변의 지반의 응력상태를 변화시키고, 암반의 단열계에 영향을 미칠 수 있다. 국내에서 2016년 9월 12일과 2017년 11월 15일에 각각 발생한 지진규모 5.8의 경주지진과 지진규모 5.4의 포항지진은 양산단층대와 관련되며, 양산단층대 및 인근 지역 암반의 단열계에 영향을 미쳤을 가능성이 있다. 본 연구에서는 동해안 지역에 위치하는 중 저준위 방사성폐기물 처분장 부지 내 암반의 단열계 특성(방향성, 주향에 따른 절리개수, 절리간격, 절리간극, 경사각, 심도 구간별 절리빈도, 상대 암반강도)이 경주지진 및 포항지진에 의해서 영향을 받았는지를 분석하기 위하여 부지내 감시공에서 2005년과 2018년에 실시한 초음파 주사검층자료를 비교 분석하였다. 초음파 주사검층 분석 결과, 주향에 따른 절리개수, 절리간극, 심도 구간별 절리빈도는 2005년보다 2018년에 대체로 증가하였다. 이러한 증가는 지진의 영향으로 인한 단열체계의 변화로 인한 영향이거나, 2005년 감시공 설치 이후 10년 이상의 오랜 기간 나공 상태에서 공벽의 풍화로 인한 것일 수도 있다. 또한 KB-14공에서 전체 절리의 방향성과 절리의 평균 간격이 2005년과 2018년 사이에 다소 차이를 보이고 있으나, 절리면 경사와 상대 암반강도는 전반적으로 2005년과 2018년이 유사하게 나타났다.

• 자원환경지질
• /
• 제28권6호
• /
• pp.579-585
• /
• 1995

삼광광산은 옥천대의 서부에 위치하는 백악기의 금-은 광상으로서 선캠브리아기의 화강편마암내에 배태되어 있다. 광산의 금과 은의 품위는 각각 8.4 g/t, 13.6 g/t으로서 가채 매장장은 335.000 MT으로 추정된다. 이 광상은 Au-Ag광물 이외에 유비철석, 방연석, 섬아연석, 황동석, 황철석, 자류철석을 함유하는 열수성 석영맥상광상이다. 광상을 이루는 맥들의 구조를 근거로 할 때 광화작용의 구조규제는 $N40^{\circ}-80^{\circ}E$ 주향과 $55^{\circ}SE$-수직의 경사를 보이는 본맥의 생성, EW주향과 $30^{\circ}-80^{\circ}S$의 경사를 보이는 상반맥의 발달 그리고 $N25^{\circ}-40^{\circ}W$ 주향과 $65^{\circ}-80^{\circ}SW$ 경사를 갖는 국성맥의 생성 등 3가지로 나눌 수 있다. 광상배태의 구조운동은 이 지역에 발달하는 주향이동단층의 최소응력축$({\sigma}_3)$과 관련이 있으며 광맥은 이때에 발생한 열극을 충진한 것으로서 다음과 같이 5단계로 해석된다. (1) NS계의 불연속면에 예각으로 작용한 주응력 $({\sigma}_1)$에 의한 주단층$(F_1)$의 생성, (2) 이와 동시에 발달한 인장파쇄대 $(T_1)$를 충진한 국성맥의 생성. (3) 단층의 계속적인 성장과 $T_1$의 경사가 커짐에 따른 $T_2$(대홍맥)의 계속적 발달, (4) ${\sigma}_1$이 우수향을 보일 때 발달하는 $T_3$(염기성 암맥)의 관입, (5) 역단층의 활동에 의한 국사봉액으로부터 상반액의 생성이 있었던 것으로 보인다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.