• Korean Journal of Agricultural Science
• /
• v.11 no.2
• /
• pp.207-217
• /
• 1984

Seasonal growth performances or root collar diameter and seedling height of Quercus acutissima. Q. mongolica and Q. variabilis were measured at regular intervals of 10 or 15 days after the treatments of some combinations of soil water regime ${\times}$ fertilization. The treatments of soil water regime and fertilization Influenced on the growth performances of seedlings differently with one another in course of time lapse. The growth performances revealed highly significant differences between soil water regimes, between fertilizations and between their interactions after unlike time lapses by species. The effects of soil water regime were exhibited in retard compared with those of fertilization, and to be different outstandingly in the treatments of N or N+P+K fertilization. The limit of soil water potential influencing critically on the growth performances might be estimated to be in -3~-6 bar in all the species. The growth responses were significantly different between N or N+P+K treatment and P or K treatment or control in all the species, and the treatment effects represented more great differences in moist soil water regime than in dry soil water regime. The interactions of soil water regime ${\times}$ fertilization were revealed s lowly with time lapse in all the treatments. The statistical differences of growth responses of root collar diameter according to the treatments were observed in earlier stage compared with those of seedling height. By comparison of the growth responses of the species studied, Q. variabilis and Q. mongolica seemed to be more resistant to moisture stress than Q. acutissima.

• Journal of dental hygiene science
• /
• v.14 no.1
• /
• pp.22-28
• /
• 2014

This research aimed to understand the relevance between irritable bowel syndrome (IBS) and sleep quality for dental hygiene students in certain areas. It was conducted on 344 students from four universities in Jeollabuk-do from May to September 2013 using a structured questionnaire. The following are the results. 57.6% of the IBS bowel movement conditions were mixed type, 10.5% constipation type, 7.6% uncategorized, and 6.1% diarrhea type. For sleep quality based on the subjects' general characteristics, third years were 11.45, second years 10.90, and first years 9.53 (p=0.034). The sleep quality was statistically significantly lower as the years increased, and even for IBS (p=0.026), it was low and showed a significant difference. For difference in sleep quality based on IBS presence, habitual sleep efficiency, sleeping pill dosage (p=0.043), and day time functional disorder (p=0.007) showed statistically significant differences and lower sleep quality than the control group. For difference in sleep quality based on IBS bowel movement condition, mixed type was the highest for sleep disturbance at 6.86, constipation type was 1.00 for habitual sleep efficiency, constipation type was 1.42 for subjective sleep quality, uncategorized type was 0.15 for sleeping pill dosage but not statistically significant. In day time functional disorder, constipation type was the highest at 2.61 and showed a significant difference (p=0.012). The correlation between the sub-factors of sleep quality was positive. Based on the above study results, we learned that for IBS, sleep quality becomes lower as the year increases, and functional disorder was observed during day time due to low sleep quality. Education on IBS symptoms is needed, adequate stress management method to alleviate symptoms and prevention programs for correct diet must be developed to enhance sleep quality.

• Journal of Haehwa Medicine
• /
• v.11 no.1
• /
• pp.137-149
• /
• 2002

Dong-Eui-Bo-Gham Oriental medicine clinic on the purpose of losing their weight, from March 1, 2001 to March 1, 2002. The characteristics studied were gender, average weight, average height, distribution of body fat rate, base body metabolism rate, distribution of bmi, purpose of losing weight, treatment history, cause of gaining weight, clinical symptoms, distribution of Sahsang constitution, and change of body constituent. The conclusions drawn from this study were: 1. Among patients who came to the clinic for weight loss, there were 16 females (80%), and 4 males (20%). The ratio of gener was 1 to 4 (male to female) The distribution of their ages were 1 in one's teens (5%), 6 in their 20s (30%), 7 in their 30s (35%), and 6 in their 40s (30%). 2. The average weight of the patients was 72.155kg, and their average height was 163.2 cm. 3. The body fat rates of patients were distributed as: 2 were below 25 (10%), 3 were 25 to 30 (15%), 8 were 30 to 35 (40%), 5 were 35 to 40 (25%), and 2 were 40 to 45 (10%). 4. The base body metabolism rates of the patients were distributed as: 1 was below 1000Kcal (5%), 6 were 1100 to 1200Kcal (30%), 5 were 1200 to 1300Kcal (25%), 6 were 1300 to 1400Kcal (30%), and 2 were 1400 to 1500Kcal (10%). 5. The distribution of the patients bmi was: 4 were below 20 (20%), 5 were 20 to 25 (5%), 11 were 25 to 30 (55%), and 4 were 30 to 35 (20%). 6. The patients visited the clinic to lose their weight for the follwoing purposes: 5 were related to health concerns (25%), and 15 were to imprve their physical apprearnce (75%). Among patients who wanted to lose their weight becase of health concerns, 4 were married (20%) and 1 was single (5%). Among patiens who wanted to lose their weight to improve their physical appearance, 6 were married (30%) and 9 were single (45%). 7. As for the past treatment methods, physical exercises were most frequently used (19 patiens, 43%). 14 tried diet (32%), 8 used food substitues (19%), 1 was treated through Western medicine, and 1 was not related to any of these (2%). 8. Main reasons for weight gains were: 12 were related to overeating (40%), 10 were stress (33%), and 8 were lack of physical exercise (27%). 9. Physical symptoms included: 15 were fatigue (29%), 14 were constipation (26%), 13 were body swelling (25%), 3 were headache (5%), menstruation pain (4%), one was stomach upset (2%), 2 were related to physical structure, and 2 were related to other (4%). 10. As for the distribution of Sahsang constitution, 10 were Taeum (50%), 9 were Sohyang (45%), and 1 was Sohum (5%). 11. The average muscle weight was 44.87kg, average abdomen fat rate was 0.8999, and average base body metabolism rate was1369.2Kcal. 12. For the 5-week period, The body fat rate changes were 35.93 1.56% to 30.40 1.98% for A group, and 34.27 1.19% to 31.73 1.38% for B group. The abomen fat rate changes were 0.90 0.02% to 0.86 0.03 for A group, and 0.89 0.02% to 0.83 0.02% for B group. The body fat weight changes were 26.92 2.04kg to 20.74 1.98kg for A group, and 27.86 3.37kg to 24.58 3.02kg for B group. The body weight chages were 72.36 3.18kg to 64.54 2.55kg for A group, and 72.48 3.14kg to 67.74 3.11kg for B group. The muscle rate changes were 43.86 1.63kg to 43.10 1.76kg for A group, and 42.72 1.22kg to 41.60 1.86kg for B group. Overall, A group was superior to B group. 13. After being treated for obesity, 13 patients used exercise treatment (65%), 5 continued to receive obesity treatment (25%), and 2 used diet (10%). Based on these results, we could conclude that the importande of setting a criterion of obesity and weight control have changed according to changes in social and cultural values, and that treatment of obesity through Oriental medicine and research should keep up with changes in esthetic and psychological values.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.546-555
• /
• 2014

The final aim of this study is to develop a biofiltration system integrated with plant vegetation for improving indoor air quality effectively depending on indoor space and characteristics. However, to approach this final goal, several requirements such as constant pressure drops (PDs) and soil moisture contents (SMCs), which influence the capacity design for a proper ventilation rate of biofiltration system, should be satisfied. Thus, this fundamental experiment was carried out to adjust a proper wind speed and to ensure a stabilization of initial SMCs within biofilter for uniform distribution of SMCs and PDs, and for normal plant growth, especially avoiding root stress by wind. Therefore, we designed horizontal biofliter models and manufactured them, and then calculated the ventilation rate, air residence time, and air-liquid ration based on the biofilter depending on three levels of wind speed (1, 2, and $3cm{\cdot}s^{-1}$). The relative humidity (RH) and PD of the humidified air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of lettuce and duffy fern grown within biofilter were measured depending on the three levels of wind speed. As a result of wind speed test, $3{\cdot}sec^{-1}$ was suitable to keep up a proper RH, SMC, and plant growth. Thus, the next experiment was set up to be two levels of initial SMCs (low and high initial SMC, 18.5 and 28.7%) within each biofilter operated and a non-biofiltered control (initial SMC, 29.7%) on the same wind speed ($3cm{\cdot}sec^{-1}$), and measured on the RH and PD of the air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of Humata tyermani grown within biofilter. This result was similar to the first results on RHs, SMCs, and PDs keeping up with constant levels, and three SMCs did not show any significant difference on plant growth parameters. However, two biofiltered SMCs enhanced dry weights of the plants slightly than non-biofiltered SMC. Thus, the stability of this biofiler system keeping up major physical factors (SMC and PD) deserved to be adopted for designing an advanced integrated biofilter model in the near future.

• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.193-206
• /
• 2004

Geophysical data including chirp (3 7 kHz) subbottom profile and detailed bathymetry were obtained over three seamounts in the Ogasawara Fracture Zone (OFZ) of the western Pacific, as a part of manganese crust survey onboard R/V Onnuri in 2003. The OFZ is a 150-km-wide, 600-km-long rift zone, which separates the East Mariana and Pigafetta Basin. The OFZ is unique in that it includes many seamounts (e.g., Magellan Seamounts andseamounts on the Dutton Ridge). The sub-seafloor acoustic echoes obtained near the OFZ were classified into following types on the basis of their characteristics: types I-1(pelagic sediment with parallel or subparallel reflectors), I-2 (pelagic sediment with no internal reflectors), and III-1 (reef build-up complex) on summit; types II-1 and III-2 (basement outcrop) on flank rift zone and upper slope, respectively; type III-3 (slump) on the lower slope and embayment between the flank rift zones; types II-2 (debrite) on the base of slope and basin floor; and types II-3 (turbidite or pelagic sediment) and II-4 (turbidite) on the basin floor. The mass-wasting that produced the complex of type II-2 debrite and III-3 slump on the lower slope and basin may have been caused by (1) strong tensional stress in the OFZ which may cause the numerous fissures or basement faults and (2) complex of the faults on the summit and steep upper slope. The variations in the echo type of pelagic sediment in the summit of seamounts may be related with the changes in the depositional and/or erosional environments. Type I-2 pelagic sediment, which is characterized by a thin and intermittent coverage, was probably deposited at a sheltered area when the current was strong, whereas type I-1 pelagic deposit occurred during a stage of progressive sedimentation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.171-183
• /
• 2016

The effects of weather variations on winter hulless barley were analyzed using data obtained from winter crop situation test at Iksan from 1985 to 2015. The wintering stage in the 16 years from 2000 to 2015 has become colder and shorter than that in the previous 15 years from 1985 to 1999. This has resulted in an early sequence of regrowth date, heading date, and ripening date. Heading date of hulless barley was mostly influenced by regrowth date and period of stem elongation. Futher, the regrowth date and period of stem elongation were strongly negatively correlated with the average air temperature in February and the maximum air temperature in March, respectively. The number of spikes per $m^2$ and 1000-grain weight of Saechalssal cultivated from 2003 to 2015 showed strong positive correlations with yield. In early heading years, yield increased with extended ripening period and with increased 1000-grain weight. There was a strong negative correlation between 1000-grain weight and the average temperature during the ripening period. In the 15 years from 1985 to 1999, warm winters contributed to yield increase with increase in the number of spikes per $m^2$ and a long ripening period. In contrast, in the recent 16 years from 2000 to 2015, the large variability in air temperature during the wintering stage, the decreasing number of spikes per $m^2$ and the steadily increasing air temperature and decreasing precipitation during the ripening stage have caused high temperature stress and yield loss in late heading years.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.240-240
• /
• 2017

Quinoa (Chenopodium quinoa Willd.) is one of the ancient crops cultivated in the Andes region at an altitude of 3,500-4000m in Chile and Bolivia from 5000 BC. It contains a large amount of protein, minerals and vitamins in comparison with other crops. The cultivation area has been increasing worldwide because of its excellent resistance to various abiotic stress such as salinity, drought and low temperature. ${\gamma}$-Ray radiation of high dose is often used as a tool to induce mutations in plant breeding, but it has a deleterious effect on organisms. However, the radiation may have a positive stimulatory effect of 'hormesis' in the low dose range. This experiment was carried out to investigate the optimum dose range for creating the quinoa genetic resources and to investigate the hormesis effect at low dose on the quinoa. This experiment was performed for 120 days from November, 2016 to February, 2017 in the greenhouse of Gyeongsang National University. ${\gamma}$-Ray radiation was irradiated to seeds at 0 Gy, 50 Gy, 100 Gy, 200 Gy, 300 Gy, 400 Gy, 600 Gy, 800 Gy and 1000 Gy for 8 hours. (50 Gy) using the low level radiation facility ($Co^{60}$) of Cooperative Research Institute of Radiation Research Institute, KAERI. Fifty seeds were placed on each petri dish lined with wet filter paper and germination rate was measured at a time interval of 2 hours for 40 hrs. The length of the root length was measured one week after germination. Each treatment was carried out in 3 replicates. The growth of seedlings were investigated for 10 days after transplanting of 30 day-old seedlings. The plant height, NDVI, SPAD, Fv/Fm, and panicle weight were measured. The germination rate was highest at 50Gy and 0Gy and the rate of seeds treated with 400Gy or higher rate decreased to 25% of the seeds treated with 50Gy. The emergence rate of seedling in pot experiment was higher at the dose of 200 Gy, 300 Gy and 400 Gy than at 0 and 50Gy. However, the rate was lower at strong radiation higher than 600Gy at which $1^{st}$ leaf was not expanded fully and dead due to extreme overgrowth at 44 days after treatment (DAT). The highest value of panicle weight was observed at 50Gy (6.15g) and 100Gy (5.57g). On the other hand, the weight at high irradiated dose of 300Gy and 400Gy was decreased by about 55% compared to low dose (50 Gy). NDVI measurement also showed the highest value at 50 Gy as the growth progressed. SPAD was the highest at 400 Gy and showed positive correlation with irradiation dose except 0 Gy. Fv/Fm was high at 50 Gy up to 30 DAT and no difference between treatments was observed except for 400 Gy from 44 DAT. The plant height was the highest in 50Gy during the growing period and was higher in the order of 50Dy, 100Gy, 0Gy, 200Gy, 300Gy and 400Gy in 88 DAT. In this experiment, the optimal radiation dose for hormesis was 50Gy and 100Gy, and the optimal radiation dose for mutagenesis seems to be 400 Gy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.