• Earthquakes and Structures
• /
• v.19 no.5
• /
• pp.395-409
• /
• 2020

With verifications through many relevant researches in the past few decades, adopting the equivalent lateral force procedure for designing seismically isolated structures as a preliminary or even final design approach has become considerably mature and publicly acceptable, especially for seismic isolation systems that mechanically exhibit bilinear hysteretic behavior. During the design procedure, in addition to a given seismic demand, structural designers still need to previously determine three parameters, such as mechanical properties of seismic isolation systems or design parameters and performance indices of seismically isolated structures. However, an arbitrary or improper selection of given parameters might cause diverse or even unacceptable design results, thus troubling structural designers very much. In this study, first, based on the criterion that at least either two design parameters or two performance indices of seismically isolated structures are decided previously, the rationality and applicability of design results obtained from different conditions are examined. Moreover, to consider variations of design parameters of seismically isolated structures attributed to uncertainties of mechanical properties of seismic isolation systems, one of the conditions is adopted to perform bounding analysis for seismic isolation design. The analysis results indicate that with a reasonable equivalent damping ratio designed, considering a specific variation for two design parameters (the effective stiffness and equivalent damping ratio) could present more conservative bounding design results (in terms of isolation displacement and acceleration transmissibility) than considering the same variation but for two mechanical properties (the characteristic strength and post-yield stiffness).

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1355-1360
• /
• 2008

Effects of dietary ${\delta}$-aminolevulinic acid (ALA) supplementation on serum iron status, blood characteristics, egg production and quality were examined in laying hens in an 8-week feeding trail. Two hundred and forty (Hy-line brown, 40-week-old) layers were randomly assigned to four dietary treatments with ten replications (six layers in adjacent three cages). Dietary treatments included: 1) CON (basal diet), 2) ALA1 (CON+ALA 5 ppm), 3) ALA2 (CON+ALA 10 ppm) and 4) ALA3 (CON+ALA 15 ppm). All nutrient levels of diets were formulated to meet or exceed NRC (1994) recommendations for laying hens. During the entire experimental period, differences of serum iron concentration and total iron binding capacity (TIBC) were significantly increased in ALA1 supplemented treatment (quadratic effect, p<0.05). The difference of total protein between 8 and 0 weeks was significantly higher in ALA2 treatment than CON treatment (quadratic effect, p<0.05). No significant effects were observed on hemoglobin, WBC, RBC, lymphocyte and albumin concentrations. Egg production and egg weight were not influenced by the ALA supplementation. Egg yolk index was also significantly higher in ALA3 treatment than CON treatment at the end of 4 and 8 weeks (linear effect, p<0.05). Haugh unit was increased in ALA3 treatment compared to CON and ALA1 treatments at the end of 8 weeks (linear effect, p<0.05). However, egg shell thickness, breaking strength and yolk color unit were not affected by the ALA supplementation. In conclusion, dietary ALA supplementation at a level of 5 ppm can affect iron concentration in serum while higher levels (10 or 15 ppm) have some beneficial influences on blood profiles and egg quality.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.529-543
• /
• 2003

Deep-sea surface sediments, acquired from 1997 to 2002 in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were analyzed for index and geotechnical properties to provide background information for the design of manganese nodule minor. The sediments were classified into 16 types based on the measured properties and evaluated in terms of miner maneuverabillity and potential environmental impacts arising from mining activities. It was found that the middle part of the study area covered with coarse siliceous sediments is more favorable to the commercial production than the northern part of pelagic red clay. In particular, Area B2 in the middle part is considered the best mining site since it shows the highest abundance as well as it consists mostly of normally to over consolidated (types B, C, D) coarse siliceous sediments that are appropriate for effective minor movement and accompany weak environmental impacts. Taking account of all the analyzed core logs, the average shear-strength values are proposed as a practical guideline fur movements of a manganese nodule miner: 6.0 kPa at 10cm and 7.0kPa at 40cm below the seabed.

• Composites Research
• /
• v.14 no.2
• /
• pp.13-21
• /
• 2001

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece driveshafts composed of carbon/epoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesive joint was used to join the composite shaft and the aluminum yoke. The torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element analysis and compared with the experimental result. Torque transmission capability was based on the Tsai-Wu failure index fur composite shaft and the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and the finite element analyses, it was found that the static torque transmission capability of the composite driveshaft was highest at the critical yoke thickness, and saturated beyond the critical length. Also, it was found that the one-piece composite driveshaft had 40% weight saving effect compared with a conventional two-piece steel driveshaft.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.4
• /
• pp.516-523
• /
• 2005

The experiment was conducted to study the effect of dietary combinations of vitamin A (VA), vitamin E (VE) and methionine (Met) on growth performance, meat quality and immunity in commercial broilers. Ross chicks (n=3,630) were allocated to five experimental treatments with three replicates per diet. The dietary treatments were: VA 8,000 IU, VE 10 IU (diet 1); VA 12,000 IU, VE 10 IU (diet 2); VA 8,000 IU, VE 100 IU (diet 3); VA 12,000 IU, VE 100 IU (diet 4) and; VA 12,000 IU, VE 100 IU/kg diet and 20% Met higher than other groups (diet 5). The Met content in diet 1 to diet 4 were as per the requirement suggested by NRC. Separate vitamin premixes were prepared for each treatment diet as per the requirement of study. The 35 d study revealed significantly (p<0.0001) higher weight gains in broilers fed diet 3 and diet 5, than in the rest of the groups during starter phase (0-3 weeks) only. The feed intake did not vary significantly at all phases of study, but feed efficiency was significantly (p<0.05) lower in diet 1 during starter and overall phase (4-5 weeks). The bone strength and bone composition, except bone calcium, remained unaffected due to experimental diets studied after 35 d of experimental feeding. The thio-barbituric acid reactive substances (TBARS) were significantly (p=0.0013) lower in the breast meat in group 5, followed by group 3, than in the rest of the groups. The immune studies conducted, antibody titers to sheep red blood cells, thickness index to phytohaemagglutinin-P, and heterophil: lymphocyte ratio, did not show any significant difference among treatments. It could be concluded that supplementation of VA, VE and Met at higher levels could be beneficial to broilers only during the starter phase.

• Korean Journal of Poultry Science
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2001

This study conducted to investigate the effects of feeding Fermkito 50 on the egg production and egg quality hens. One hundred forty four, 50 weeks old ISA brown commercial layer, were used in a 28 d growth assay. Dietary treatments included 1) control(basal diet), 2) FERMO.5(based diet+0.5% Fermkito), 2) FERM1.0(basal diet+1.0% Fermkito), 3) FERM+YU(basal diet+0.5% Fermkito and 0.05% yucca extract). Overall (d 0 to 28), egg production tended to increase as the concentration of Fermkito 50 in the diets was increased without significant difference(P〈0.05). As adding level of Fermkito 50 increased in the diets, egg weight tended to increase. Laying hens fed FERM+YU diet were higher egg weight than laying hens fed control diet(P〈0.05). Egg shell breaking strength was not influenced by Fermkito 50. As adding level of Fermkito 50 was increased in the diets, yolk color tended to increase. Laying hens fed FERM+YU diet had improved egg yolk index compared to laying hens fed control diet. Total-cholesterol of egg yolk in FERM1.0 and FERM+YU treatments was significantly decreased compared to that in control diet(p〈0.05). Total-cholesterol and triglyceride concentrations in serum tended to increase as the concentration of Fermkito 50 in the diets was decreased(P〈0.05). Also, HDL-cholesterol concentration in serum with FERM1.0 and FEUM+YU treatments was significantly higher than control diet(P〈0.05). However, LDL-cholesterol concentration in serum with FERM1.0 and FERM0.5+YU treatments was significantly lower than control diet(P〈0.05). In conclusion, supplemental Fermkito 50 in laying hen diets can be used to improve egg quality.

• Journal of Korean Society on Water Environment
• /
• v.30 no.5
• /
• pp.491-502
• /
• 2014

As meteorology is the driving force for lake thermodynamics and mixing processes, the effects of climate change on the physical limnology and associated ecosystem are emerging issues. The potential impacts of climate change on the physical features of a reservoir include the heat budget and thermodynamic balance across the air-water interface, formation and stability of the thermal stratification, and the timing of turn over. In addition, the changed physical processes may result in alteration of materials and energy flow because the biogeochemical processes of a stratified waterbody is strongly associated with the thermal stability. In this study, a novel modeling framework that consists of an artificial neural network (ANN), a watershed model (SWAT), a reservoir operation model(HEC-ResSim) and a hydrodynamic and water quality model (CE-QUAL-W2) is developed for projecting the effects of climate change on the reservoir water temperature and thermal stability. The results showed that increasing air temperature will cause higher epilimnion temperatures, earlier and more persistent thermal stratification, and increased thermal stability in the future. The Schmidt stability index used to evaluate the stratification strength showed tendency to increase, implying that the climate change may have considerable impacts on the water quality and ecosystem through changing the vertical mixing characteristics of the reservoir.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.339-350
• /
• 2007

Content, swelling, concentration, drainage of clay are critical factors that could control rock failures as well as discontinuous geological structures like faults and joints. Especially, the proportional components of clay minerals can be one of few direct indicators to a rock failure caused well by rainfall. Criticality of the role of clay mineral contents gets bigger in the slope and tunnel design. This study, using a horizontal boring core of pelitic/psammitic phyllite from the OO tunnel construction site, aims to investigate mineral composition changes related to fault distribution and their mechanical effects to the activity of these discontinuous layers (i.e., clay-filled fault layers), and eventually to define correlation among rock compositions, weathering products and rock instabilities. Field survey and lab tests were carried out for the composition and strength index of fault clay minerals within the core samples and microscopic analysis of fresh and weathered rock samples.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.111-118
• /
• 2010

Reinforced steel corrosion due to concrete carbonation is one of main factors on the durability of RC structure. The carbonation velocity have an effect on carbon dioxide density, concrete quality and structural shape. Specially, these problems have increased in urban area. This study investigates the carbonation status of the bridges and quantifies the effect of carbonation based on various domestic field data. The failure probability of durability is evaluated on the basis of reliability concept. According to experimental results of the carbonation depth, the carbonation depth increased with structural age and carbonation velocity decreased with high strength of concrete. In most cases, the failure probability of durability by carbonation was more than 10%. Also, The results requires the minimum cover thickness of 70-80mm for target safety index(${\beta}$=1.3) proposed by Korean concrete specification.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.1-4
• /
• 2007

This study investigated the applicability of insulation curing method with double layer bubble sheets to the man concrete subjected to cold weather. Temperature history of the mass concrete indicated that the highest temperature of center section was exhibited at $34^{\circ}C$ while the that of surface section was $25^{\circ}C$. Difference between center and surface was shown to be less $10^{\circ}C$ when the temperature of center section was peak section, and thereby associated temperature cracking index was calculated 1.5, and occurrence probability of temperature cracking was 5%, so there was no temperature cracking caused by internal restraint. No temperature crack was observed by naked eye. It was clear that early frost demage and temperature cracking could be restrained due to reducing temperature difference between inner part and outside in the case double bubble sheets applied to insulation curing method in cold weather. The maturity of mass concrete is higher than outside about $72\sim89^{\circ}$ DD, so it was demonstrated to prevent early frost demage and ensure strength excellently. Insulation curing method with double bubble sheets was more economic than heating curing method.