• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.795-806
• /
• 1996

A structure which transmits and receives 3 subscribers packet data through an optical splitter node in an optical subscriber network of PON wave suggested and realized. All the functions which are necessary to use PON structure such as 155.52Mb/s multiplexer/demultiplexer of down-stream signal, 25.92Mb/s multiplexer/demultiplexer of up-stream signal, frame synchronizer, and phase aligner for aligning phase of the clock and received data have been integrated within 2 ICs using CMOS technonology. TDMAtechnology was suggested for up-stream transmission. In the optical up-stream transmission of the urst signals transmissionquality degradataion by APC and AGC of optical tranceiver was observed. By compensating the degradation, more than 17dB of link budget which is enough to satisfy 11.2dBthat is required in SWAN of PON architecture has been obtained with optical transceiver whose power and sensitivity are -17dBm and -34dBm respectively.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1785-1794
• /
• 2000

This paper presents a computational object model supporting CM(Continuous Media) stream interfaces including QoS(Quality of Service) required in the distributed application method for the proposed stream interface including QoS. A stream interface consists of a data channel and a control channel. In this paper, the CORBA supporting communication channel is used as the control channel and various transport protocols can be used as the dta channel of the stream interface. Also, specifications of the application QoS are included in stream interface specification. In implementation, FIFO queues and timers are used to support transmission rate, delay and jitter control mechanisms of he stream interface.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.100-108
• /
• 2007

Currently, multimedia stream services are provided in various network environments such as wireless networks. It is crucial to address QoS problem for multimedia service in heterogeneous networks. This paper suggests the scheme to increase the efficiency for the transmission of multimedia data. We also propose the adaptive algorithm that switch between UDP and TCP based on the size of the transmitted multimedia data. In addition, it presents the method that duplicates the multimedia data for the efficiency of transmission. We designed the MPEG stream service and conducted the simulation to verify our adaptive MPEG stream service.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2013

This paper proposes real-time video transmission system by the car-mounted cameras based on MOST Network. Existing vehicles transmit videos by connecting the car-mounted cameras in the form of analog. However, the increase in the number of car-mounted cameras leads to development of the network to connect the cameras. In this paper, DSP is applied to process MPEG 2 encoding/decoding for real-time video transmission in a short period of time. MediaLB is employed to transfer data stream between DSP and MOST network controller. During this procedure, DSP cannot transport data stream directly from MediaLB. Therefore, FPGA is used to deliver data stream transmitting MediaLB to DSP. MediaLB is designed to streamline hardware/software application development for MOST Network and to support all MOST Network data transportation methods. As seen in this paper, the test results verify that real-time video transmission using proposed system operates in a normal matter.

• The KIPS Transactions:PartB
• /
• v.12B no.7 s.103
• /
• pp.745-754
• /
• 2005

This paper proposes an information hiding algorithm using channel coding technique which can be used to detect transmission errors and to protect copyright for MPEG-2 video The watermark signal is generated by applying copyright information of video data to a convolutional encoder, and the signal is embedded into macro blocks in every frame while encoding to MPEG-2 video stream In the decoder, the embedded signal is detected from macro blocks in every frame, and the detected signal is used to localize transmission errors in the video stream. The detected signal can also be used to claim ownership of the video data by decoding it to the copyright Information. In this stage, errors in the detected watermark signal can be corrected by channel decoder. The 3 video sequences which consist of 300 frames each are applied to the proposed MPEG-2 codec. Experimental results show that the proposed method can detect transmission errors in the video stream while decoding and it can also reconstruct copyright information more correctly than the conventional method.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.235-240
• /
• 2006

Stream Control Transmission Protocol (SCTP) provides the multi-homing feature, which allows each SCTP endpoint to use two or more IP addresses for data transmission. In this paper, the SCTP multi-homing feature is experimented and analyzed in terms of throughput over Linux platforms based on the NISTNET network emulator. We perform the experimental analysis of SCTP throughputs by SCTP multi-homing for the various network conditions: different packet loss rates, network bandwidths, and transmission delays. From the experimental results, it is shown that the SCTP multi-homing gives much better throughout gun over the SCTP single-homing case in the networks with a high packet loss rate. In the meantime, the other factors including network bandwidth and transmission delay do not seem to give a significant impact on the performance of the SCTP multi-homing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.347-356
• /
• 1987

This paper is to propose a new line code suitable for a high speed unipolar pulse transmission system, such as a high speed optical digital transmission system. The original information speed can be converted into the transmission speed $\frac{(m+1)}{m}$ by the speed converter. Then this code, named mBiZ code, is generated by means of an Exclusive NOR between the bit stream inserted a space into every m bits and the bit stream delayed by the time slot allocated a single bit at the output coded sequence. Therefore, a mBiZ code can reduce a redundancy in the line code for transmission and its conversion circuits can be devised easily. The mBiZ code can also suppress undesirable long consecuitive identical digits and make line code balance in the mark and space ratio. Therefore, high frequency and low frequency components in power spectrum of a mBiZ code can be suppessed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2328-2340
• /
• 1996

Until now, the transmission of data for VOD(Video on Demenad) was based on a real time modelling of video data. Markow Modulated Fluid Sources(MMFS) and Markow Modulated Poisson Sources(MMPS) are the most widely used modelling methods. But the charactersitics of the VBR(Variable Bit Rate) signal prevents modelling from actually being "real-time". Also these methods call for the use of large buffers for the abolishment of cell loss. These modelling methods are, of course, useful i case of teleconferences where a real time modelling of video traffic is inevitable, but they are insufficient in cases where the characteristic infomation of video traffic can be obtained beforehand-cases such as VOD. Video data is speial in that if one file is preprocessed all other products can simply be copied from that onepreprocessed file. This characteristic helps reduce the overhead arising from the job of drawing out characteristic information to almost zero. But still, compared to the existing real time modelling method data transmission using characteristic information succeeds in raising the efficiency of data transmission. In tis paper we will outline a method of dta transmission which use the characteristic information of each video stream, and evaluate this method through some experiments.periments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.54-60
• /
• 2007

The Digital Multimedia Broadcasting(DMB) system is developed to offer high quality multimedia content to the mobile environment. The system adopts the MPEG-4 standard for the main video, audio and other media format. For providing interactive contents, it also adopts the MPEG-4 scene description that refers to the spatio-temporal specifications and behaviors of individual objects. With more interactive contents, the scene description also needs higher bitrate. However, the bandwidth for allocating meta data, such as scene description is restrictive in the mobile environment. On one hand, the DMB terminal renders each media stream according to the scene description. Thus the binary format for scene(BIFS) stream corresponding to the scene description should be decoded and parsed in advance when presenting media data. With this reasoning, the transmission delay of the BIFS stream would cause the delay in transmitting whole audio-visual scene presentations, although the audio or video streams are encoded in very low bitrate. This paper presents the effective optimization technique in adapting the BIFS stream into the expected bitrate without any waste in bandwidth and avoiding transmission delays inthe initial scene description for interactive DMB content.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.93-98
• /
• 2008

Full-scale fire extinguishment tests were conducted to develop loaded stream fire extinguishing systems for protecting underground transmission cables. The dimension of test mock-up was 5.5m height${\times}3m$ width ${\times}6m$ length, and six 154kV OF cables were piled up. Gasoline was used to ignite cates. Linear heat detection cables were installed on top of 154 kV OF cable and discharge nozzles were installed on the top and sidewalls, respectively. As a result, both surface fires and deap-seated fires were extinguished successfully within the specified 3 minutes by discharging loaded stream agent.