• 제목/요약/키워드: strains, damage index

검색결과 13건 처리시간 0.031초

철근콘크리트기둥의 손상지표 설정과 손상도 평가 (Damage Assessment and Establishment of Damage Index for Reinforced Concrete Column)

  • 윤일로;권용길
    • 한국산업융합학회 논문집
    • /
    • 제10권3호
    • /
    • pp.149-155
    • /
    • 2007
  • Damage assessment and Damage index for RC members failed in flexure was investigated by using the nonlinear finite element analysis, included with nonlocal constitutive law, which is analyzed for the localization of the failure on the post-peak region. In the nonlcal constitutive law, The local strains obtained at gauss points were averaged over a particular length, i.e. characteristic length and it was used to evaluate the damage of RC column member. As the analysis results, The value of nonlocal strain shows less mesh sensibility. In the damage assessment, It was confirmed that evaluations of damage of RC member were able to use nonlocal compressive strain on a cover concrete and a core concrete of the member. Moreover it was confirmed that damage process for the statically indeterminate structure was able to evaluate the damage context of the component members of the structure.

  • PDF

정적 변형률을 이용한 플로팅 구조물의 손상탐지 (Damage Detection in Floating Structure Using Static Strain Data)

  • 박수용;전용환
    • 한국항해항만학회지
    • /
    • 제36권3호
    • /
    • pp.163-168
    • /
    • 2012
  • 최근 물 가까이에서 생활하고 여가를 보낼 수 있는 친수공간에 대한 욕구가 증가하면서 플로팅 구조물에 대한 관심이 커져가고 있다. 이에 본 연구에서는 정적 변형률을 이용한 플로팅 구조물의 손상탐지기법을 제안하였다. 손상을 탐지하기 위한 손상지수는 기존의 모달 변형에너지를 이용한 손상지수 법을 변형률을 적용할 수 있도록 확장하여 손상 전과 손상 후의 변형률로 나타내었으며, 손상지수 계산 후 손상부위를 결정하는 손상탐지는 패턴인식을 이용하였다. 제안된 이론의 정확성과 타당성은 플로팅 구조물의 축소모형을 제작하고 계측된 변형률 데이터에 적용하여 검증하였다.

Advancing behavioral understanding and damage evaluation of concrete members using high-resolution digital image correlation data

  • Sokoli, Drit;Shekarchi, William;Buenrostro, Eliud;Ghannoum, Wassim M.
    • Earthquakes and Structures
    • /
    • 제7권5호
    • /
    • pp.609-626
    • /
    • 2014
  • The capabilities of a high-resolution Digital Image Correlation (DIC) system are presented within the context of deformation measurements of full-scale concrete columns tested under reversed cyclic loading. The system was developed to have very high-resolution such that material strains on the order of the cracking stain of concrete could be measured on the surface of full-scale structural members. The high-resolution DIC system allows the measurement of a wide range of deformations and strains that could only be inferred or assumed previously. The DIC system is able to resolve the full profiles of member curvatures, rotations, plasticity spread, shear deformations, and bar-slip induced rotations. The system allows for automatic and objective measurement of crack widths and other damage indices that are indicative of cumulated damage and required repair time and cost. DIC damage measures contrast prevailing proxy damage indices based on member force-deformation data and subjective damage measures obtained using visual inspection. Data derived from high-resolution DIC systems is shown to be of great use in advancing the state of behavioral knowledge, calibrating behavioral and analytical models, and improving simulation accuracy.

비탄성 지진 해석을 통한 박스 터널의 손상 상태 및 손상 지수 규명 (Identification of damage states and damge indices of single box tunnel from inelastic seismic analysis)

  • 박두희;이태형;김한섭;박정선
    • 한국터널지하공간학회 논문집
    • /
    • 제18권2호
    • /
    • pp.119-128
    • /
    • 2016
  • 성능기반 설계에서 구조물의 안정성은 손상 상태와 이를 수치화한 손상 지수에 의해 평가한다. 지상 구조물에 대해서는 이들이 비교적 명확하게 정의되어 있으나 지중 구조물에 대한 연구 수행 사례는 매우 제한적이다. 본 연구에서는 국내 지하철 시스템에 널리 사용되는 박스형 개착식 터널에 작용하는 지진하중에 의한 손상 상태와 손상 지수를 일련의 비탄성 프레임 해석을 통하여 규명하였다. 터널의 3 단계 손상 상태는 구조물에 발생한 소성 힌지의 수에 의해 정의하였다. 손상 지수는 터널 구조 부재의 탄성 모멘트와 항복 모멘트의 비로 정의하여 탄성 해석만으로도 비탄성 거동과 파괴 메커니즘의 모사가 가능하도록 하였다. 또한 손상 지수를 자유장 전단 변형률의 함수로도 제시하였다. 전단 변형률은 1 차원 지반응답해석으로 쉽게 계산할 수 있으므로 이를 이용하여 간편하게 박스형 터널의 초기 내진 안정성 평가가 가능할 것으로 판단된다. 보다 일반적이고 보편적인 적용성 확보를 위해서는 추후 포괄적인 해석을 수행하여 다양한 형태의 터널과 지반에서의 전단 변형률 분포와 불확실성에 대한 연구가 진행되어야 할 것이다. 본 연구에서 제시된 터널 내진설계를 위한 손상 상태, 손상 지수, 그리고 전단파 속도 및 전단변형률 간의 상호관계 플래트폼은 새로운 아이디어를 담고 있으며 추후 설계에 널리 활용될 수 있을 것으로 판단된다.

Structural damage detection by principle component analysis of long-gauge dynamic strains

  • Xia, Q.;Tian, Y.D.;Zhu, X.W.;Xu, D.W.;Zhang, J.
    • Structural Engineering and Mechanics
    • /
    • 제54권2호
    • /
    • pp.379-392
    • /
    • 2015
  • A number of acceleration-based damage detection methods have been developed but they have not been widely applied in engineering practices because the acceleration response is insensitive to minor damage of civil structures. In this article, a damage detection approach using the long-gauge strain sensing technology and the principle component analysis technology is proposed. The Long gauge FBG sensor has its special merit for damage detection by measuring the averaged strain over a long-gauge length, and it can be connected each other to make a distributed sensor network for monitoring the large-scale civil infrastructure. A new damage index is defined by performing the principle component analyses of the long-gauge strains measured from the intact and damaged structures respectively. Advantages of the long gauge sensing and the principle component analysis technologies guarantee the effectiveness for structural damage localization. Examples of a simple supported beam and a steel stringer bridge have been investigated to illustrate the successful applications of the proposed method for structural damage detection.

지반보강용 주입재의 성능향상을 위한 초음파 에너지의 활용 (Application of ultrasonic energy to enhance capability of soil improving material)

  • 문준호;;정강복;김영욱
    • 한국터널지하공간학회 논문집
    • /
    • 제19권4호
    • /
    • pp.567-576
    • /
    • 2017
  • 본 연구에서는 지반보강용 시멘트-페이스트에 초음파를 조사하여 온도변화, 점도, 일축압축강도, 육안관측 시험을 통해 초음파가 시멘트-페이스트에 어떠한 물리적 특성을 변화시키는지에 대하여 고찰하였다. 실험에 사용된 w/c는 50~100%까지 다양하게 진행하였으며, 그라우트재의 온도변화는 ${\pm}2^{\circ}C$내에서 범위를 벗어나지 않도록 조절하여 실험을 진행하였다. 실험결과 온도변화는 초음파 조사시간에 비례하여 일정하게 증가하였고, 초음파를 조사한 지반보강용 시멘트-페이스트 점도는 최대 40%까지 감소하는 것으로 나타났다. 일축압축강도는 평균 30% 증가하였으며 육안관측시험에서도 초음파를 조사한 시멘트-페이스트의 단면이 공극이 많이 감소하는 양상을 보였다.

Seismic deformation demands on rectangular structural walls in frame-wall systems

  • Kazaz, Ilker
    • Earthquakes and Structures
    • /
    • 제10권2호
    • /
    • pp.329-350
    • /
    • 2016
  • A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

The Probiotic Effects of the Saccharomyces cerevisiae 28-7 Strain Isolated from Nuruk in a DSS-Induced Colitis Mouse Model

  • Lee, Jang Eun;Lee, Eunjung
    • Journal of Microbiology and Biotechnology
    • /
    • 제32권7호
    • /
    • pp.877-884
    • /
    • 2022
  • Probiotics are microorganisms that can benefit host health when ingested in a live state, and lactic acid bacteria are the most common type. Among fungi, Saccharomyces boulardii (SB) is the only strain known to have a probiotic function with beneficial effects on colitis; however, information on other probiotic yeast strains is limited. Therefore, this study aimed to discover yeast strains expressing intestinal anti-inflammatory activities by exhibiting probiotic properties in dextran sodium sulfate (DSS)-induced colitis mice model. Nuruk (Korean traditional fermentation starter) containing various microbial strains was used as a source for yeast strains, and S. cerevisiae 28-7 (SC28-7) strain was selected with in vitro and in vivo characteristics to enable survival in the intestines. After 14 days of pretreatment with the yeast strains, DSS was co-administered for six days to induce colitis in mice. The results revealed that the disease activity index score was lowered by SC28-7 treatment compared to the DSS group, and the colon length and weight/length ratio were recovered in a pattern similar to that of the normal group. SC28-7 administration significantly reduced the secretion of pro-inflammatory cytokines in the serum and modified the mRNA expression of inflammatory cytokines (interleukin-1β, transforming growth factor-β, and interferon-γ) and proteins involved in gut barrier functions (mucin 2, mucin 3, zonula occludens-1, and occludin) in colon tissues. These results indicate that SC28-7 attenuates DSS-induced colon damage and inflammation, supporting its future use as a probiotic yeast for treating and preventing intestinal inflammatory diseases such as inflammatory bowel disease.

Comparative experimental study on seismic retrofitting methods for full-scale interior reinforced concrete frame joints

  • Yang Chen;Xiaofang Song;Yingjun Gan;Chong Ren
    • Structural Engineering and Mechanics
    • /
    • 제86권3호
    • /
    • pp.385-397
    • /
    • 2023
  • This study presents an experiment and analysis to compare the seismic behavior of full-scale reinforced concrete beam-column joint strengthened by prestressed steel strips, externally bonded steel plate, and CFRP sheets. For experimental investigation, five specimens, including one joint without any retrofitting, one joint retrofitted by externally bonded steel plate, one joint retrofitted by CFRP sheets, and two joints retrofitted by prestressed steel strips, were tested under cyclic-reserve loading. The failure mode, strain response, shear deformation, hysteresis behavior, energy dissipation capacity, stiffness degradation and damage indexes of all specimens were analyzed according to experimental study. It was found that prestressed steel strips, steel plate and CFRP sheets improved shear resistance, energy dissipation capacity, stiffness degradation behavior and reduced the shear deformation of the joint core area, as well as changed the failure pattern of the specimen, which led to the failure mode changed from the combination of flexural failure of beams and shear failure of joints core to the flexural failure of beams. In addition, the beam-column joint retrofitted by steel plate exhibited a high bearing capacity, energy consumption capacity and low damage index compared with the joint strengthened by prestressed steel strip, and the prestressed steel strips reinforced joint showed a high strength, energy dissipation capacity and low shear deformation, stirrups strains and damage index compared to the CFRP reinforced joint, which indicated that the frame joints strengthened with steel plate exhibited the most excellent seismic behavior, followed by the prestressed steel strips.

인양홀을 이용한 외부 강선 보강 철근 콘크리트 보의 거동 특성 (Structural Behavior of RC Beam Strengthened with External Tendons Using Lifting Hole Anchorage System)

  • 이석훈;홍성남;한경봉;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권4호
    • /
    • pp.98-106
    • /
    • 2008
  • 인양홀을 이용한 정착장치는 손상된 구조물에 내하력을 증가시키기 위해 사용되어지며, 시공이 간편하고 보강효율이 좋은 경제적인 방법이다. 본 논문에서는 구조물에 손상을 입히지 않으면서 충분한 보강효과를 가져 올 수 있는 인양홀 이용 정착장치를 선정하여 그에 대한 적용 가능성을 연구하였다. 실무에서 시공빈도가 높은 인양홀 이용 단부 정착 장치가 적용된 3개의 실험체를 제작하였고, 이에 대한 휨 실험을 수행하여 처짐, 변형률 및 파괴양상을 분석하였다. 인양홀 이용 정착장치가 구비된 철근 콘크리트 보의 보강 성능을 실험적으로 규명하기 위하여 각 실험체의 균열하중, 항복하중, 극한하중, 강선의 응력 증가량, 처짐 및 연성 등을 비교 분석하였다.