• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.53-56
• /
• 2015

A combined experimental and numerical study has been conducted to investigate the downstream interaction between simulated SNG-air premixed flames in fuel composition of 91% $CH_4$ + 6% $C_3H_8$ + 3% $H_2$. In this study, the effects of fuel molar concentration(lean-rich) and strain rate($a_g$) were major parameters. A main focus is to investigate flames behavior and chemical interaction at flames downstream. The numerical results were calculated by OPPDIF application. The reaction mechanism adopted was USC-II model including C3 reaction.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.215-224
• /
• 1998

In this study, total strain was measured by LVDTs and local strains on the surface of specimens were measured by strain gauges. And axi-symmetrically elastoplastic FEM analyses was carried out for cylindrical specimens. Considering the influence of the restraint induced by the loading platen, in the case of H/D=1, the strain distribution on the side of a specimen is obviously affected by the condition of platen contact. Furthermore, it is clear that the larger H/D ratio becomes, the smaller the influence to the strain distribution is. For the smooth contact condition, the strain on the side is not influenced by the stiffness of the specimen, the shape and the scale effect, the strain distribution coincides with the nominal total strain. Whereas, in the case of rough contact condition, the strain distribution is remarkably affected. It is made clear that strain responses of hard rock specimens may more sensitive than these of soft rock specimens as a results of interaction between loading platens and specimen and the uniaxial strength of specimens may strongly depends on this interaction and stress-strain relation is affected by the contact condition.

• Journal of the Korean Society of Combustion
• /
• v.20 no.1
• /
• pp.6-14
• /
• 2015

Numerical study was conducted to clarify effects of added $H_2O$ for the downstream interaction between $H_2$-air and CO-air premixed flames in counterflow configuration. The reaction mechanism adopted was Davis model which had been known to be well in agreement with reliable experimental data. The results showed that both lean and rich flammable limits were reduced in increase of strain rate. The most discernible difference between the two with and without having $H_2O$ and/or $H_2$ addition into $H_2$-air and CO-air premixtures was two flammable islands for the former and one island for the latter at high strain flame conditions. Even a small amount of $H_2$, in which $H_2$-air premixed flame cannot be sustained by itself, participates in CO oxidation, thereby altering the CO-oxidation reaction path from the main reaction route $CO+O_2{\rightarrow}CO_2+O$ with a very long chemical time in CO-air flame to the OH-related reaction routes including $CO+OH{\rightarrow}CO_2+H$ with very short chemical times. This intrinsic nature alters flame stability maps appreciably. The results also showed that chemical effects of added $H_2O$ help lean flames at relatively low strain rate be sustained, and suppress the flame stabilization at high strain rates.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.95-102
• /
• 2002

The present study focuses on the relation of the attitudes of university students to disabled by using modified disability factor scales(DFS, Siller). As for the attitude areas, it relies on the eight categories DFS provides. The 8 categories that specify each attitude area are: generalized rejection, distressed identification, inferred emotional consequences, imputed functional limitation, authoritarian virtuousness, rejection of intimacy, interaction strain, mainstreaming. This study is based on a series of questionnaire researches conducted on 322 students, over the period from October 19th to November 14th, 2001. The questionnaire carries 50 items, covering the 8 attitude areas and each item has 5 choices. The subjects' responses to each of the areas are examined in their relations to the four conditions, as they are analysed by t-test and one way ANOVA. The conclusion drawn from the research are as follows: 1. There is no significant difference between the students of the department concerned with the problem of disability, and those of the department unconcerned. But the responses are significantly different in the three areas of generalized rejection, rejection of intimacy and interaction strain(1st condition, P<.05). 2. The responses are significantly different in 6 areas except for the two, distressed identification and inferred emotional consequences, between the students who have volunteered services as helpers of the disabled and those who have no such experiences(2nd condition, P<.05). 3. the responses are significantly different between those who have volunteered long-time services and those who are far less experienced(3nd condition, P<.05). 4. There is no significant difference, whether the subjects have disabled persons around them or not. But generalized rejection, authoritarian virtuousness, rejection of intimacy, interaction strain & mainstreming show significant differences(4th condition, P<.05). 5. Generalized rejection, rejection intimacy and interaction strain show significant differences in every pair of the 4 condition. 6. Distressed identification and inferred emotional consequence show no significant difference between the two conditions in every pair of the 4 considerations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3424-3432
• /
• 1996

For mechanical system operating at high temperature, damage due to the interaction effect of creep and fatigue plays an important role. The objective of this paper is to develop a modified creep-fatigue damage model which separately analyzes the pure creep damage for hold time and the creep-fatigue interaction damage during startup and shutdown period. The creep damage was calculated by the general creep damage equation and the creep-fatigue interaction damage was calculated by the modified equation which is based on the frequency modified strain range method with strain rate term. In order to verify the proposed model, a service of high temperature low cycle fatigue tests were performed. The test specimens were made from inconel-718 superalloy and the test parameters were wave shape and hold time. A good agreement between the predicted lives based on the proposed model and experimentally obtained ones was observed.

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.53-60
• /
• 1995

Inoculation with the compatible strain Ds 1 of Xanthomonas campestris pv. vesicatoria caused brownish ad water-soaked lesions, but incompatible strain Bv5-4a produced hypersensitive symptoms with local necrosis on tomato (cv. Kwangyang) leaves. Bacterial populations of the compatible strains Ds 1 propagated more greatly than the incompatible strain Bv5-4a at the frist onset, but no differences were observed 5 days after inoculation. The bacterial infection induced the synthesis and accumulation of soluble proteins in tomato leaves, especially in the incompatible interaction. Native-polyacrylamide gel electrophoresis distinguished the soluble proteins in the tomato leaves infected by the compatible or incompatible strains. A protein of low molecular weight occurred only in the incompatible interaction. Some pathogenesis-related (PR) proteins, especially the 15, 18, 23, 26 and 54 kDa proteins, were detected only in the infected tomato leaves. In the two-dimensional electrophoresis, some proteins with different molecular weights (Mr. 21∼29 kDa) and the pI 8∼9 appeared more distinctly only in the incompatible interaction. These data suggest that the de novo synthesis of some PR proteins in tomato may be significant in defense against X. c. pv. vesicatoria.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.19-30
• /
• 2002

The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.13-13
• /
• 2014

Species belonging to the genus Fusarium are widely distributed and cause diseases in many plants. Isolation of fungal strains from air or cereals is necessary for disease forecasting, disease diagnosis, and population genetics [1]. Previously we showed that Fusarium species are resistant to toxoflavin produced by the bacterial rice pathogen Burkholderia glumae while other fungal genera are sensitive to the toxin, resulting in the development of a selective medium for Fusarium species using toxoflavin [2]. In this study, we have tried to elucidate the resistant mechanism of F. graminearum against toxoflavin and interaction between the two pathogens in nature. To test whether B. glumae affects the development of F. graminearum, the wild-type F. graminearum strains were incubated with either the bacterial strain or supernatant of the bacterial culture. Both conditions increased the conidial production five times more than when the fungus was incubated alone. While co-incubation resulted in dramatic increase of conidial production, conidia germination delayed by either the bacterial strain or supernatant. These results suggest that certain factors produced by B. glumae induce conidial production and delay conidial germination in F. graminearum. To identify genes related to toxoflavin resistance in F. graminearum, we screened the transcriptional factor mutant library previously generated in F. graminearum [3] and identified one mutant that is sensitive to toxoflavin. We analyzed transcriptomes of the wild-type strain and the mutant strain under either absence or presence of toxoflavin through RNAseq. Expression level of total genes of 13,820 was measured by reads per kilobase per million mapped reads (RPKM). Under the criteria with more than two-fold changes, 1,440 genes were upregulated and 1,267 genes were down-regulated in wild-type strain than mutant strain in response to toxoflavin treatment. A comparison of gene expression profiling between the wild type and mutant through gene ontology analysis showed that genes related to metabolic process and oxidation-reduction process were highly enriched in the mutant strain. The data analyses will focus on elucidating the resistance mechanism of F. graminearum against toxoflavin and the interaction between the two pathogens in rice. Further evolutionary history will be traced through figuring out the gene function in populations and in other filamentous fungi.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.219-223
• /
• 2004

Korea Railroad Research Institute(KRRI) propelled sensing and measurement techniques development for measure of Lateral Force and Vertical Force With Italy to international cooperation research project for laser technology for measurement of wheel/rail interaction force. In this paper, we compared the laser technology for measurement of wheel/rail interaction force with the existing method. And then, we suggests interaction force measurement system procedure of hereafter.