• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.13 no.2
• /
• pp.134-145
• /
• 2010

Purpose: The serologic diagnosis of rotaviral infections is not commonly used in clinical practice, but is used in seroepidemiologic studies. In this study, the usefulness of Escherichia coli-expressed recombinant VP6 proteins of group A rotavirus in the serodiagnosis of rotavirus infections by ELISA was evaluated. Methods: The recombinant VP6 proteins of group A rotavirus expressed in E. coli Rosetta II strain were purified and identified. One hundred sera from 22 children (4 healthy neonates, 13 healthy children, and 5 immunocompromised children) who had serial sera samples prior to and after rotavirus infections were provided by the Gyeongsang National University Hospital, a member of the National Biobank of Korea. IgG, IgA, and IgM antibodies against rVP6 were analyzed by ELISA in all of the patients and Western blot analysis in 4 neonates. Results: ELISA tests using rVP6 proteins of group A rotavirus as antigen revealed that IgG, IgA, and IgM antibodies increased after rotaviral infections in most neonates and healthy children. IgG antibodies also increased after rotaviral infections in most immunocompromised children without an adequate increase in IgM or IgA antibodies. Western blot analysis in four neonates revealed very early IgM antibody responses, even in the sera with low optical densities in ELISA tests. Conclusion: Our study showed that ELISA using rVP6 as an antigen is a valid diagnostic tool for seroepidemiologic studies of rotavirus infections and Western blot analysis is a sensitive test in detecting IgG, IgA, and and IgM antibodies in patients with rotavirus infections.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.393-398
• /
• 2016

The objective of this study was to isolate pathogenic Escherichia coli from fresh vegetables with selective media and Petrifilm, and identify a suspicious colony using biochemical identification. Twenty gram of lettuce, twenty gram of cabbage and ten gram of sprout were prepared, and a 5-strain mixture of pathogenic E. coli (Enterohemorrhagic E. coli NCCP11142, Enterotoxigenic E. coli NCCP14037, Enteropathogenic E. coli NCCP14038, Enteroaggregative E. coli NCCP14039, Enteropathogenic E. coli NCCP15661) was inoculated to obtain 1, 2 and 3 log CFU/g. Eighty to ninety milliliter of buffered peptone water (BPW) was placed and pummeled for 60 s. As a results, the Petrifilm method was all positive, but enrichment method of qualitative analysis was negative except for 3-log CFU/g inoculated lettuce. Regarding biochemical identification of pathogenic E. coli, the identification rates were dependent on type of methods and vegetables; lettuce: API 20E 100% (44/44), Microgen GNA 100% (44/44) and Food System 66.7% (10/15), cabbage: API 20E 64.7% (22/34), Microgen GNA 50% (16/32) and Food System 60% (9/15), sprout: API 20E 65.1% (28/43), Microgen GNA 62.3% (27/43) and Food System 53.3% (8/15). These results could be useful in determining an appropriate method to detect pathogenic E. coli in fresh vegetables.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.25-38
• /
• 2011

After the financial crisis, what has been the rapidly growth of large supermarkets, stores, and restaurants linked to concerns that have already reached saturation point, but the new opening large supermarkets is expected to continue into the future. The major supermarkets are continue to grow outward but growth slowed. And that is expected to continue differentiation of the product, acceptance the customer needs, acquiring high margin of sales products. Then the ongoing development of PB brand is to be positioned effective marketing strategy for overcoming the period of slow growth. In addition, big three local supermarkets continue to launch a clothing PB brand, expansion and operation strategy for the situation and based on this study and the success of the domestic large-Mart's PB and PB identifying problem and the need for differentiation and profit for the successful strategy is to discuss in this study. This research looks at the concept of major market's private brand, the strategy, the success example and the prospects, and views the globally rapid-growing private brands, not only having the limited role of distributing the products as retailers, but also having a control of the distribution channel as a manufacturing company. World's major advanced distribution companies, to differentiate their companies' products and increase the profitability, are putting a lot of efforts into private brand products, and there are many good examples that are globalizing, externally expanding, and creating high financial results. In this research, we presented three major domestic discount stores as examples to show that there is a need for a differentiated private brand management strategy in the saturated discount store industry in Korea. Also, we aim to provide a new product strategy for the future that has been saturated with discount stores to the limit, by providing suggestions that private brand products can be used as weapons with the strongest competiveness in the retail industry through pursuing store differentiations from thorough market analysis and product researches, meeting the customers' needs, and obtaining high margins. PB products, particularly clothing design, a thorough market analysis and product development trends and customer needs to reflect the acquisition of High margin differentiated powerful products and sustainable growth through the stores, large supermarkets, congested, a new breakthrough that can give a good opportunity to provide implications discount stores, new product strategy based on ways to limit proposed. This study discount the major three companies studied, the less strain is a generalization. In the future, domestic and local discount store brand PB, SPA brand that the multinational comparative analysis of the value of the PB expansion strategy centered on clothing, additional studies will be needed.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.487-494
• /
• 2009

Purpose: Small size of recombinant scFv antibody has many advantages such as rapid blood clearances and improved targeting antibodies to tumor region. On the other hand owing to small size, number of amino group is insufficient in conjugation with chelator and fluorescence labeling. This study is to introduce poly lysine tag to the C-terminal end of scFv lym-1 sequence for fluorescence chelator conjugation. Materials and Methods: Poly lysine scFv lym-1 gene, cloned into pET-22b (+) vector, was expressed in E. coli BL21 (DE3) strain. Antibody purification was performed with Ni-NTA column and then size exclusion column chromatography. Expression and purification levels of poly lysine tagged scFv lym-1 antibody were confirmed by western blot analysis. I-124, I-125, I-131 and Tc-99m were used for radiolabeling of purified poly lysine scFv lym-1. Flow cytometry analysis of FIT( conjugated poly lysine scFv lym-1 was performed for confirmation of immunoreactivity of human Burkitt's lymphoma cells. Results: Poly lysine scFv lym-1 antibody was purified through two steps and identified as molecular weight of 48 KDa. Radiolabeling yields of I-124, I-125, I-131 and Tc-99m into poly lysine scFv lym-1 were >99%, >99%, >95% and >99%, respectively. Flow cytometry analysis of poly lysine scFv and scFv lym-1 was showed similar immunoreactivity to human Burkitt's lymphoma cells. Conclusion: Poly lysine tag was useful for the sufficient number of amino groups to scFv lym-1 antibody for chelator conjugation with minimizing loss of immunoreactivity.

• Journal of the Korean Geographical Society
• /
• v.38
• /
• pp.15-36
• /
• 1988

In this paper, I consider the development of methods in contemporary human geography in terms of a dialectical relation of action and structure, and try to draw a new horizon of method toward which geographical research and spatial theory would develop. The positivist geography which was dominent during 1960s has been faced both with serious internal reflections and strong external criticisms in the 1970s. The internal reflections that pointed out its ignorance of spatial behavior of decision-makers and its simplication of complex spatial relations have developed behavioural geography and systems-theoretical approach. Yet this kinds of alternatives have still standed on the positivist, geography, even though they have seemed to be more real and complicate than the previous one, The external criticisms that have argued against the positivist method as phenomenalism and instrumentalism suggest some alternatives: humanistic geography which emphasizes intention and action of human subject and meaning-understanding, and structuralist geography which stresses on social structure as a totality which would produce spatial phenomena, and a theoretical formulation. Human geography today can be characterized by a strain and conflict between these methods, and hence rezuires a synthetic integration between them. Philosophy and social theory in general are in the same in which theories of action and structural analysis have been complementary or conflict with each other. Human geography has fallen into a further problematic with the introduction of a method based on so-called political ecnomy. This method has been suggested not merely as analternative to the positivist geography, but also as a theoretical foundation for critical analysis of space. The political economy of space with has analyzed the capitalist space and tried to theorize its transformation may be seen either as following humanistic(or Hegelian) Marxism, such as represented in Lefebvre's work, or as following structuralist Marxism, such as developed in Castelles's or Harvey's work. The spatial theory following humanistic Marxism has argued for a dialectic relation between 'the spatial' and 'the social', and given more attention to practicing human agents than to explaining social structures. on the contray, that based on structuralist Marxism has argued for social structures producing spatial phenomena, and focused on theorising the totality of structures, Even though these two perspectives tend more recently to be convergent in a way that structuralist-Marxist. geographers relate the domain of economic and political structures with that of action in their studies of urban culture and experience under capitalism, the political ecnomy of space needs an integrated method with which one can overcome difficulties of orthhodox Marxism. Some novel works in philosophy and social theory have been developed since the end of 1970s which have oriented towards an integrated method relating a series of concepts of action and structure, and reconstructing historical materialism. They include Giddens's theory of structuration, foucault's geneological analysis of power-knowledge, and Habermas's theory of communicative action. Ther are, of course, some fundamental differences between these works. Giddens develops a theory which relates explicitly the domain of action and that of structure in terms of what he calls the 'duality of structure', and wants to bring time-space relations into the core of social theory. Foucault writes a history in which strategically intentional but nonsubjective power relations have emerged and operated by virtue of multiple forms of constrainst wihthin specific spaces, while refusing to elaborate any theory which would underlie a political rationalization. Habermas analyzes how the Western rationalization of ecnomic and political systems has colonized the lifeworld in which we communicate each other, and wants to formulate a new normative foundation for critical theory of society which highlights communicatie reason (without any consideration of spatial concepts). On the basis of the above consideration, this paper draws a new norizon of method in human geography and spatial theory, some essential ideas of which can be summarized as follows: (1) the concept of space especially in terms of its relation to sociery. Space is not an ontological entity whch is independent of society and has its own laws of constitution and transformation, but it can be produced and reproduced only by virtue of its relation to society. Yet space is not merlely a material product of society, but also a place and medium in and through which socety can be maintained or transformed.(2) the constitution of space in terms of the relation between action and structure. Spatial actors who are always knowledgeable under conditions of socio-spatial structure produce and reproduce their context of action, that is, structure; and spatial structures as results of human action enable as well as constrain it. Spatial actions can be distinguished between instrumental-strategicaction oriented to success and communicative action oriented to understanding, which (re)produce respectively two different spheres of spatial structure in different ways: the material structure of economic and political systems-space in an unknowledged and unitended way, and the symbolic structure of social and cultural life-space in an acknowledged and intended way. (3) the capitalist space in terms of its rationalization. The ideal development of space would balance the rationalizations of system space and life-space in a way that system space providers material conditions for the maintainance of the life-space, and the life-space for its further development. But the development of capitalist space in reality is paradoxical and hence crisis-ridden. The economic and poltical system-space, propelled with the steering media like money, and power, has outstriped the significance of communicative action, and colonized the life-space. That is, we no longer live in a space mediated communicative action, but one created for and by money and power. But no matter how seriously our everyday life-space has been monetalrized and bureaucratised, here lies nevertheless the practical potential which would rehabilitate the meaning of space, the meaning of our life on the Earth.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.87-103
• /
• 1999

Purpose: This study was undertaken to quantitatively estimate the degree of the damage and recovery of the irradiated rat condylar cartilage using the Image Analyzer. Materials and Methods: Experimental animals were 16 male rats of the Sprague-Dawley strain at the age of 20 day irradiated with the dose of 10 Gy in their head and neck region. Four rats were sacrificed at the each of the following time intervals - 1, 4, 7 and 14 days, respectively. The same number of control group animals were sacrificed at the each age of 21. 24, 27 and 34 days, respectively. The specimens were stained with 0.5％ toluidine blue and examined with light microscope. The condylar cartilage was divided into 4 zones; fibrous zone, proliferating zone, upper hypertrophic zone, and lower hypertrophic zone. And then, the proliferating zone was subdivided into 2 layers - upper and lower layer, and upper and lower hypertrophic zone were subdivided into three layers, respectively - upper, middle and lower layer. With the aid of Image Analyzer, morphometric analysis was performed. The thickness, the numerical density of cells, the cell area density, the extracellular matrix area density, the mean area of single cell, the mean area of extracellular matrix per single cell were measured and analysed. Results: In the experimental group, the thickness of the fibrous zone was slightly increased and that of the proliferating zone and the upper and the lower hypertrophic zone was markedly decreased. With time, the thickness of the fibrous zone was gradually increased and that of the proliferating zone and the upper and the lower hypertrophic zone was steadily in the decreased state. The numerical density of cells of the proliferating zone was increased on post-irradiated 1 day, but decreased after post-irradiated 4 day, and that of the upper hypertrophic zone was decreased. The numerical density of cells of the lower hypertrophic zone was decreased in the early stage and then was decreased or not significantly different from that of the control group with time. In the experimental group, the cell area density of the fibrous zone and the proliferating zone was decreased in the early stage and then gradually increased or not significantly different from that of the control group with time. The cell area density of the upper and the lower hypertrophic zone was varied with time. The extracellular matrix area density value were totally opposite to the cell area density values: The mean area of single cell of the fibrous zone and the proliferating zone was .decreased on post-irradiated 1 day, and increased after post-irradiated 4 day. The mean area of single cell of the upper hypertrophic zone was varied with each layer and time. In the experimental group, the mean area of extracellular matrix per single cell of the fibrous zone was not significantly different with control group, and that of the proliferating zone was decreased on post-irradiated 1 day, and increased after post-irradiated 4 day. The mean area of extracellular matrix per single cell of the lower hypertrophic zone was increased in the early stage. and that of upper hypertrophic zone was varied with each layer and time. Conclusion: The condylar cartilages of rats were affected by irradiation, but the changes were vaned with each layer and time. By morphometric analysis. the changes of the cells of the condylar cartilage of irradiated rat could be calculated quantitatively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.109-123
• /
• 2009

The aim of the study was to assess the influence of insertion torque of bone quality and to compare axial force, moment and von Mises stress using finite element analysis of plastoelastic property for bone stress and strain by dividing bone quality to its thickness of cortical bone, density of trabecular bone and existence of lower cortical bone when implant inserted to mandibular premolar region. The $Br{\aa}nemark$ MKIII. RP implant and cylindrical bone finite model were designed as cortical bone at upper border and trabecular bone below the cortical bone. 7 models were made according to thickness of cortical bone, density of trabecular bone and bicortical anchorage and von Mises stress, axial force and moment were compared by running time. Dividing the insertion time, it seemed 300msec that inferior border of implant flange impinged the upper border of bone, 550msec that implant flange placed in middle of upper border and 800msec that superior border of implant flange was at the same level as bone surface. The maximum axial force peak was at about 500msec, and maximum moment peak was at about 800msec. The correlation of von Mises stress distribution was seen at both peak level. The following findings were appeared by the study which compared the axial force by its each area. The axial force was measured highest when $Br{\aa}nemark$ MKIII implant flange inserts the cortical bone. And maximal moment was measured highest after axial force suddenly decreased when the flange impinged at upper border and the concentration of von Mises stress distribution was at the same site. When implant was placed, the axial force and moment was measured high as the cortical bone got thicker and the force concentrated at the cortical bone site. The influence of density in trabecular bone to axial force was less when cortical bone was 1.5 mm thick but it might be more affected when the thickness was 0.5 mm. The total axial force with bicortical anchorage, was similar when upper border thickness was the same. But at the lower border the axial force of bicortical model was higher than that of monocortical model. Within the limitation of this FEA study, the insertion torque was most affected by the thickness of cortical bone when it was placed the $Br{\aa}nemark$ MKIII implant in premolar region of mandible.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.229-250
• /
• 1993

This study was performed to investigate the morphological and structural changes of bone tissues and the effects of irradiation on the mandibular bodies of rats which were fed low calcium diets. In order to carry out this experiment, 160 seven-week old Sprague-Dawley strain rats weighing about 150 gm were selected and equally divided into one normal diet group of 80 rats and one low calcium diet group with the remainder. These groups were then subdivided into two groups, 40 were assigned rats for each subdivided group, exposed to radiation. The Group 1 was composed of forty non-irradiated rats with normal diet, Group 2 of forty irradiated rats with normal diet, Group 3 forty non-irradiated rats with low calcium diet, and Group 4 forty irradiated rats with low calcium diet. The two irradiation groups received a single dose of 20 Gy on the jaw area only and irradiated with a cobalt-50 teletherapy unit. The rats with normal and low calcium diet groups were serially terminated by ten on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After termination, both sides of the dead rats mandible were removed and fixed with 10% neutral formalin. The bone density of mandibular body was measured by use of bone mineral densitometer(Model DPX -alpha, Lunar Corp., U.SA). Triga Mark ill nuclear reactor in Korea Atomic Research Institute was used for neutron activation and then calcium contents of mandibular body were measured by using a 4096 multichannel analyzer (EG and G ORTEC 919 MCA, U.SA). Also the mandibular body was radiographed with a soft X-ray apparatus(Hitex Co., Ltd., Japan). Thereafter, the obtained microradiograms were observed by a light microscope and were used for the morphometric analysis using a image analyzer(Leco 2001 System, Leco Co., Canada). The morphometric analysis was performed for parameters such as the total area, the bone area, the inner and outer perimeters of the bone. The obtained results were as follows: 1. In the morphometric analysis, total area and outer perimeter of the mandibular bodies of Group 3 were a little smaller than that of Group 1. The mean bone width and bone area were much smaller than that of Group 1 and the inner perimeter of Group 3 was much longer than that of Group 1. The total area and outer perimeter of Group 2 and Group 4 showed little difference. The mean bone width and bone area of Group 4 were smaller than that of Group 2 and the inner perimeter of Group 4 was longer than that of Group 2. 2. The remarkable decreases of the number and thickness of trabeculae and also the resorption of endosteal surface of cortical bone could be seen in the microradiogram of Group 3, Group 4 since the 3rd day of experiment. On the 21st day of experiment, the above findings could be more clearly seen in Group 4 than in Group 3. 3. The bone mineral density of Group 3 was lesser than that of Group 1 and the bone mineral density of Group 4 was lesser than that of Group 2 on the 7th, 14th, 21st days. The irradiation caused the bone mineral density to be decreased regardless of diet. In the case of Groups with low calcium diet, the bone mineral density was much decreased on the 21st day than on the 3rd day of experiment. 4. The calcium content in mandible of Group 3 was smaller than that of Group 1 throughout the experiment. roup 4 showed the least amount of calcium content. The irradiation caused the calcium content to be decreased regardless of diet. In the case of Groups with low calcium diet, the calcium content was much decreased on the 21st day than on the 3rd day of experiment. In conclusion, the present study demonstrated that morphological changs and decrease of bone mass due to resorption of bone by low calcium diet, and that the resorption of bone could be found in the spongeous bone and endosteal surface of cortical bone. So the problem of resorption of bone must be considered when the old and the postmenopausal women are taken radiotherapy because the irradiation seems to be accelerated the resorption of osteoporotic bone.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.