• Journal of Korea Water Resources Association
• /
• v.49 no.8
• /
• pp.673-683
• /
• 2016

An Idea to estimate flexible criteria for river water use permits was proposed that takes the spatio-temporal flow variation along the river into account, which was applied to the Keumho River, one of the tributary of the Nakdong River in Korea. This idea implies the temporal division of four periods with different criteria, combining flood/non-flood seasons and irrigation/non-irrigation periods, while a single one has been applied throughout the year in the current practice. Through flow regime analysis of daily natural flow simulations at Dongchon and Seongseo, the control points of the study area, Q355 and 1Q10 for non-flood and non-irrigation period, Q275 for non-flood and irrigation period, Q185 for flood and irrigation period were suggested respectively. So, those values that subtract instream flow were determined as the flexible criteria in each season. From the comparison of current practice and the proposed method, it was estimated that $10.6\;million\;m^3/year$ is available for more water use permits without additional development of water storage. Therefore, it is conceived that flexible criteria for river water use permission suggested in this study can contribute to improve the national policies for more efficient water resources management in the future.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.249-256
• /
• 2012

The changes in the volatile organic compounds in plum after its electron beam irradiation and storage were determined using the simultaneous distillation extraction method and gas chromatograph-mass spectrometry. There were 44, 46, 45, 47, and 38 volatile compounds in the 0-, 0.25-, 0.5-, 0.75-, and 1 kGy irradiated samples, respectively. Also, the volatile flavor components of the plum that was stored for 30 days were identified as 48, 40, 40, 39, and 40 components. The compositions of the volatile compounds of the control and irradiated samples showed a similarity after the storage. Especially, the more important volatile flavor of the plum was identified as hexanal of the C6compounds, (E)-2-hexenal and (Z)-3-hexenal. In particular, hexanal, (E)-2-hexenal, and (Z)-3-hexen-1-ol increased in all the doses, where as hexanol and (E)-2-hexen-1-ol decreased. Among the lactone compounds, ${\gamma}$-hexalactone, ${\gamma}$-octalactone, and ${\gamma}$-decalactone were identified during the storage period in the raw samples. Hexanonic acid and 2-hexenoic acid were not identified during the storage of the samples, and 2-methylprrole was detected only when the storage samples were irradiated at a dose higher than 0.5kGy. Therefore, it was shown that there was no effect on the variation of the volatile organic component suntil 1 kGy in the plum was irradiated with an electron beam.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.633-638
• /
• 2017

The amount of radioactive waste has been rapidly increased with development of radiation treatment in medical field. Recently, it has been a common practice to use I-131 for thyroid cancer, F-18 for PET/CT and Tc-99m for diagnosis of nuclear medicine. All the wastes concerned have been disposed of by means of the self-disposal method, for example incineration, after storage enough to decay less than clearance level. IAEA proposed criteria for clearance level of waste which depends on the individual ($10{\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, specific radioactivity of radioactive waste contaminated with Re-186 was measured to confirm whether it meets the clearance level. Re-186 has long half life of 3.8 days relatively and emits beta and gamma radiation, therefore it can be applied in treatment and imaging purposes. The specific radioactivity of contaminated gloves weared by radiation workers was measured by MCA(Multi-channel Analyzer) which was calibrated by reference materials in accordance with the measuring procedure. As a result, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and physical half-life was considered, and it is showed that the physical half-life is longer than induced half-life. Therefore, the storage period of radioactive waste for self-disposal may be curtailed in case of application of induced half-life. The result of this study will be proposed as ISO standard.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.8-15
• /
• 2011

Purpose: This study evaluated the bonding strength of direct relining resin to Co-Cr denture base material according to surface treatment and immersion time. Materials and methods: In this study, Co-Cr alloy was used in hexagon shape. Each specimen was cut in flat surface, and sandblasted with $110\;{\mu}m$ $Al_2O_3$ for 1 minute. 54 specimens were divided into 3 groups; group A-control group, group B-applied with surface primer A, group C-applied with surface primer B. Self curing direct resin was used for this study. Each group was subdivided into another 3 groups according to the immersion time. After the wetting storage, shear bond strength of the specimens were measured with universal testing machine. The data were analyzed using two-way analysis of variance and Tukey post hoc method. Results: In experiment of sandblasting specimens, surface roughness of the alloy was the highest after 1 minute sandblasting. In experiment of testing shear bond strength, bonding strength was lowered on group B, C, A. There were significant differences between 3 groups. According to period, Bonding strength was the highest on 0 week storage group, and the weakest on 2 week storage group. But there were no significant differences between 3 periods. According to group and period, bonding strength of all group were lowered according to immersion time but there were no significant differences on group B and group C, but there was significant difference according to immersion time on group A. Conclusion: It is useful to sandblast and adopt metal primers when relining Co-Cr metal base dentures in chair-side.

• Journal of Dairy Science and Biotechnology
• /
• v.31 no.1
• /
• pp.35-49
• /
• 2013

The purpose of this study was to develop Mozzarella cheese analogues by using dairy products in the form of WPC 34, WPC 80, whey protein, demineralized whey powder, and lactose powder along with soy milk. Soy milk was separately blended with 5% WPC 34 (A), WPC 80 (B), DWP (C), WP (D), and LP (E) and also with 10% WPC 34 (F), WPC 80 (G), DWP (H), WP (I), and LP (J). Blending of soy milk and whey products showed that increase in the proportions of whey products (WPC 34, WPC 80, DWP, WP, and LP) led to increase in the protein, lactose, and SNF levels of the admixture. A decrease in fat content was observed for all cheeses prepared from mixtures, relative to those for the control cheese. The nitrogen content within analogue samples was higher than that in the control cheese and increased with increase in the proportions of whey products within soy milk. Higher water soluble nitrogen levels were observed in cheese prepared from whey-product-blended soy milk than in the control cheese. The non-protein nitrogen level within the control Mozzarella cheese was significantly lower than that in the Mozzarella analogues, and, in the case of cheese analogues, it increased with increase in the proportion of whey products in soy milk. With regard to the physicochemical and sensory qualities of the Mozzarella cheese analogues and control cheese, the pH of all analogue samples, with the exception of the cheese prepared from group G, was lower than that of the control Mozzarella cheese. Rheological studies showed that the hardness of Mozzarella cheese analogues was lower than that of the control Mozzarella, while the elasticity, cohesiveness, and brittleness of the analogues was higher. The control sample had a higher meltability level than any of the Mozzarella analogues. Mozzarella cheese prepared with the traditional method had higher browning and stretching levels than all the cheese analogues, but a lower oiling-off level.

• Korean Journal of Community Nutrition
• /
• v.11 no.5
• /
• pp.650-660
• /
• 2006

Recently, according to increase in production of pond snails resulting from the widespread organic farming, organic farmers are showing a lot of interests in the promotion of consumption and extending the market of pond snails. This study was performed to suggest the process of product development of the ready-to-eat pond-snail Mandu as a health food, to show the results of market test of the pilot product, and to investigate the change of the sensory characteristics during storage periods. For the market test of pond-snail Mandu, the survey was developed and delivered to consumers. The questionnaire consisted of 3 parts such as respondents demographic characteristics, customer's perception of pond-snail Mandu before tasting, and customer's perception of that after tasting. And the market test was carried out with university students, welfare institution residents and apartment residents in the Seoul and Gyeonggi areas. As a result of the test, the most important purchasing factors were determined in the order of taste (49.5%), hygienic quality (12.5%), nutritional value (10%) and price (9%). And only 4.2% of respondents selected brand name as an important purchasing factor. After tasting pond-snail Mandu, consumers had suggested the better taste (t=6.986, p<0.000) and price (t=2.082, p<0.05) than those of before tasting. In response to favorable impression of pond-snail Mandu, 54.5% of total respondents evaluated positively. The favorable impressions came from iron-rich Mandu (27.6%), high protein and nutritious Mandu (24.4%), calcium-rich Mandu (17.9%), diet Mandu (13.3%), and delicious Mandu (12.5%) respectively. Sensory characteristics of pond-snail Mandu were evaluated by professional panels in terms of the softness of Mandu skin, chewiness, moistness, toothpacking, color, aroma, saltiness, and degree of plain, taste, and aftertaste. The evaluation of sensory characteristics on a 7-point scale, showed that softness of mandu skin (4.44) and aftertaste (4.11) got a low scores. The statistical difference of the tastes (p>0.05) was not founded by storage period of 7, 14, 21 and 28 days. Based on the result, the improvement of these characteristics are desired in developing the pond-snail Mandu. Research method applied to this study can be useful for developing a new product.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.624-630
• /
• 2001

Two experiments on the effects of molasses additive on cassava tops silage quality to its feed intake and digestibility by growing Holstein$\times$local crossbred heifers were carried out. Sixteen plastic bags of one meter diameter and two meters length were allocated in a $2{\times}2$ factorial design with four replicates in the ensiling study, with and without the molasses additive and with two storage times (2 and 3 months). The silage produced in the first experiment was used in the feed intake and digestibility study. Six crossbred Holstein heifers, 160-180 kg live weight, were randomly allocated in a $3{\times}2$ change-over design to three treatments: Guinea grass ad libitum, 70% of grass ad libitum with a supplement of non-molasses cassava silage ad libitum, and 70% of grass ad libitum with a supplement of molasses cassava silage ad libitum. Ensiling was shown to be a satisfactory method for preservation of cassava tops. The HCN content was significantly reduced from $840mg\;kg^{-1}$ to 300 or $130mg\;kg^{-1}$, depending on storage period. The tannin content was not significantly changed. Molasses additive resulted in lower pH, Crude Protein (CP), NDF and higher DM content but did not otherwise affect chemical composition. The voluntary feed intake per 100 kg live weight of the heifers was 2.59, 2.65 and 2.91 kg DM of Guinea grass, non-molasses cassava tops silage and molasses cassava tops silage diet, respectively. Crude protein intake was significantly improved in the cassava tops silage diets. The apparent digestibility of DM, OM, CP, NDF and ADF decreased with the silage supplement diets. No significant difference in digestibility was found between the non-molasses and molasses silage diets. The digestibility coefficient of DM, OM, CP, NDF, ADF in non-molasses cassava tops silage and molasses cassava tops silage was 49.4, 52.1, 45.81, 36.6, 27.7 and 49.7, 51.9, 47.55, 28.1, 19.5, respectively. It is concluded that cassava tops can be preserved successfully by ensiling and that cassava tops silage is a good feed resource for cattle.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.367-373
• /
• 2001

In order to study the effect of modified atmosphere storage on extending shelf life of King Oyster mushroom was wrapped with PVC film and packed with 20$\mu\textrm{m}$polyolefin(PD941), and effects of temperature(0, 5, 10$^{\circ}C$) in packaging conditions on the respiration and keeping qualities were evaluated. Higher respiratory activity and weight loss were observed at higher temperature. The concentration of O$_2$and CO$_2$ of PVC wrap and polyolefin(PD941) packages for all showed 1∼2% and 10∼14%, respectively. Polyolefin(PD941) package wan superior to the PVC wrap packaging method in Hardness, Hunter L value, Hunter b value and sensory qualities, and reducing weight loss at 0$^{\circ}C$, 5$^{\circ}C$ and 10$^{\circ}C$ compared to PVC wrap. It was found that the optimum shelf-life period of King Oyster mushroom packaged by PVC wrap was estimated to be 50, 28 and 12 days at 0, 5 and 10$^{\circ}C$, respectively, and 50, 32 and 21 days in Polyolefin(PD941).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.79-89
• /
• 2023

The inventory of many materials requires a large storage space, and the longer the storage period, the higher the potential maintenance cost. When materials are stored on a construction site, there are also concerns about safety due to the reduction of room for movement and working. On the other hand, construction sites that do not store materials have insufficient inventory, making it difficult to respond to demands such as sudden design changes. Ordering materials is then subject to delays and extra costs. Although securing an appropriate amount of inventory is important, in many cases, material management on a construction site depends on the experience of the site manager, so a reasonable material inventory management plan that reflects the construction conditions of a site is required. This study proposes an economical material management method by reflecting variables such as the status of the preceding and following activities, site size, material delivery cost, timing of an order, and quantity of orders. To this end, we set the appropriate inventory amount while adjusting related activities in the activity network, using float time for each activity, the size of the yard, and the order quantity as the main variables, and applied a genetic algorithm to this process to suggest the optimal order timing and order quantity. The material delivery cost derived from the results is set as a fitness index and the efficiency of inventory management was verified through a case application.