• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.255-258
• /
• 2008

The DEM (Digital Elevation Model) can be obtained from stereo image pair acquired by LEO satellite. Stereo images may consist of at least two images with different viewing angles to the imaging target for one pass or multiple passes. While each image is generally acquired from each pass in cross-track direction for multiple passes, stereo image pair in along-track direction can be acquired during one pass with attitude control capability for the pitch axis of the satellite. Single pass stereo imaging provides stereo pair image more efficiently on the fact that stereo pair image is generated with less orbit resources and less imaging time consumption. In this paper, the feasibility study result on the stereo pair image collection planning algorithm during single pass is addressed.

• Journal of Information Display
• /
• 제6권4호
• /
• pp.26-34
• /
• 2005

In this paper, a new rectification scheme to transform the uncalibrated stereo image pair into the calibrated one is suggested and its performance is analyzed by applying this scheme to the reconstruction of the intermediate views for multi-view stereoscopic display. In the proposed method, feature points are extracted from the stereo image pair by detecting the comers and similarities between each pixel of the stereo image pair. These detected feature points, are then used to extract moving vectors between the stereo image pair and the epipolar line. Finally, the input stereo image pair is rectified by matching the extracted epipolar line between the stereo image pair in the horizontal direction. Based on some experiments done on the synthesis of the intermediate views by using the calibrated stereo image pairs through the proposed rectification algorithm and the uncalibrated ones for three kinds of stereo image pairs; 'Man', 'Face' and 'Car', it is found that PSNRs of the intermediate views reconstructed from the calibrated images improved by about 2.5${\sim}$3.26 dB than those of the uncalibrated ones.

• Korean Journal of Remote Sensing
• /
• 제33권1호
• /
• pp.1-13
• /
• 2017

This study investigates the geometric and spatial image quality analysis of KOMPSAT-3A stereo pair. KOMPSAT-3A is, the latest satellite of KOMPSAT family, a Korean earth observation satellite operating in optical bands. A KOMPSAT-3A stereo pair was taken on 23 November, 2015 with 0.55 m ground sampling distance over Terrassa area of Spain. The convergence angle of KOMPSAT-3A stereo pair was estimated as $58.68^{\circ}$. The investigation was assessed through the evaluation of the geopositioning analysis, image quality estimation and the accuracy of automatic Digital Surface Model (DSM) generation and compared with those of KOMPSAT-3 stereo pair with the convergence angle of $44.80^{\circ}$ over the same area. First, geopositioning accuracy was tested with initial rational polynomial coefficients (RPCs) and after compensating the biases of the initial RPCs by manually collected ground control points. Then, regarding image quality, relative edge response was estimated for manually selected points visible from two stereo pairs. Both of the initial and bias-compensated positioning accuracy and the quality assessment result expressed that KOMPSAT-3A images showed higher performance than those of KOMPSAT-3 images. Finally, the accuracy of DSMs generated from KOMPSAT-3A and KOMPSAT-3 stereo pairs were examined with respect to the reference LiDAR-derived DSM. The various DSMs were generated over the whole coverage of individual stereo pairs with different grid spacing and over three types of terrain; flat, mountainous and urban area. Root mean square errors of DSM from KOMPSAT-3A pair were larger than those for KOMPSAT-3. This seems due to larger convergence angle of the KOMPSAT-3A stereo pair.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.508-511
• /
• 2006

Generally, stereo pair images are necessary for 3D viewing. In the absence of quality stereo-pair images, it is possible to synthesize a stereo-mate suitable for 3D viewing with a single image and a depth-map. In remote sensing, DEM is usually used as a depth-map. In this paper, LiDAR data was used instead of DEM to make a stereo pair from a single aerial photo. Each LiDAR point was assigned a brightness value from the original single image by registration of the image and LiDAR data. And then, imaginary exposure station and image plane were assumed. Finally, LiDAR points with already-assigned brightness values were back-projected to the imaginary plane for synthesis of a stereo-mate. The imaginary exposure station and image plane were determined to have only a horizontal shift from the original image's exposure station and plane. As a result, the stereo-mate synthesized in this paper fulfilled epipolar geometry and yielded easily-perceivable 3D viewing effect together with the original image. The 3D viewing effect was tested with anaglyph at the end.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.181.2-181
• /
• 2001

Stereo PACS (Picture Archiving and Communication System) is not available yet because of some limitations of medical stereo image software and viewing devices. As a stereo PACS viewer, we designed two functions. One is selecting and viewing a multiplexed stereo image directly, and the other is selecting a stereo pair image (left and right sides both) and merging the stereo pair image into a multiplexed image in software. For the medical image compression of 3-D stereo endoscopic images, we used JPEG and Wavelet compression and to determine an acceptable compression rate using PSNR (Peak Signal-to-Noise Ratio). As a result, we got the conclusion that medically acceptable image compression rate should have the PSNR of above about 40[dB] (JPEG (5:1), Wavelet (10:1)).

• Korean Journal of Remote Sensing
• /
• 제18권3호
• /
• pp.181-186
• /
• 2002

One of the most important procedure in stereo DEM generation is the stereo matching process which finds the conjugate pixels in a pair of stereo imagery. In order to be found as conjugate pixels, the pixels should have distinct spatial feature to be distinguished from other pixels. However, in the homogeneous areas such as water covered or forest canopied areas, it is very difficult to find the conjugate pixels due to the lack of distinct spatial feature. Most of erroneous elevation values in the stereo DEM are produced in those homogeneous areas. This paper presents a simple method for improving the quality of stereo DEM utilizing the texture filters. An entropy filter was applied to one of the input stereo imagery to extract very homogeneous areas before stereo matching process. Those extracted homogeneous areas were excluded from being candidates for stereo matching process. Also a statistical texture filter was applied to the generated elevation values before the interpolation process was applied in odor to remove the remaining anomalous elevation values. Stereo pair of SPOT level 1B panchromatic imagery were used for the experiments. The results showed that by utilizing the texture filters as a pre and a post processor of stereo matching process, the quality of the stereo DEM could be dramatically improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제24권12B호
• /
• pp.2438-2446
• /
• 1999

Most of block based stereo pair compression schemes utilize the constant block size and searching area size for all the stereo pairs to find the best matching block. However, it is not efficient to use the same block size and size of searching area to all the stereo pairs, since each stereo pair has different disparity. In this Paper, we propose a method to calculate the total disparity of stereo pairs, and show how to determine the size of the block and searching area which are applied for the block based compression of the stereo pairs.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권5호
• /
• pp.383-389
• /
• 2000

This paper presents a stereo camera system that provides a Pair of stereo images using a Biprism. The equivalent of a stereo Pair of images is formed as the left and right halves of a single CCD image. The system is therefore cheap and extremely easy to calibrate since it requires only one CCD camera. An additional advantage of the geometrical set-up is that corresponding features lie on the same scanline automatically, The single camera and Biprism have led to a simple stereo system for which correspondence is very easy and which is accurate for nearby objects in a small field of view. Since we use only a single lens, calibration of the system is greatly simplified. Given the parameters in the Biprism-stereo camera system, we can reconstruct the 3-D structure using only the disparity between the corresponding points.

• Korean Journal of Remote Sensing
• /
• 제17권2호
• /
• pp.155-164
• /
• 2001

In this study, we describe the technique for deriving a digital elevation model (DEM) from a synthetic aperture radar (SAR) stereo image pair and apply it to an image pair over "Kwanak-san" in Seoul, Korea. This paper contains brief discussion of the use of stereo SAR to derive topographic data, description of the overall structure of the stereo SAR processing system, description of the site and SAR data used for the evaluation and the source of validation data, results of the stereo SAR processing, analysis and evaluation of their accuracy against map data, and finally summarizes the main highlights of the method used, comments and recommendations on its future implementation.

• Journal of Korean Society for Geospatial Information Science
• /
• 제3권1호
• /
• pp.55-66
• /
• 1995

Most studies using satellite images have been performed to determine three dimensional positioning by stereoscopic analysis for stereo-pair or to extract digital elevation model by stereo matching using image correlation techniques. Because the small errors on the ground control points have a great impact on the results, however, it is hard to get reliable products when we analyze satellite orbital parameters or acquire digital elevation model by using only stereo-pair. Also, if there are noises, shadows, or clouds on the one of stereo pair, it is difficult to produce DEM(digital elevation model) on the area under analysis or to have good accuracy. In these case, it can be solved by systematic analysis of the multiple stereo images. This paper suggests the improvements on the accuracy of the digital elevation model by the developments of stereoscopic analysis techniques for the triplet of SPOT satellite images on the same area.