• 제목/요약/키워드: step-dyeing

검색결과 58건 처리시간 0.018초

가교폴리에틸렌 지중케이블에서 화상계측을 이용한 수트리 열화현상 분석 (The Analysis of Water Tree Degradations in Underground Distribution Cables Using Image Measurement)

  • 김덕근;임장섭;이진;이준웅;김태성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.19-23
    • /
    • 1998
  • Water tree degradations have been considered as one of the most important causes of failure in underground distribution cables with polymeric insulation. Water tree growth is a preliminary step in the sequence of electrical tree initiation and electrical breakdown of the insulation. In this paper, needle electrode is made use of the etching methods and the pellet type specimen is made to observe the water tree in succession. In previous methods are able to observe the tree degradations without cutting and dyeing. The water tree image is recorded on VTR with CCD camera. The tree length of X, Y axis direction and aging area(treeing area) are calculated with image measurement. As a result of this study, water tree is observed by non-destructive method. Electrical tree is initiated from needle electrode tip only but water tree is initiated from total area of water electrode. Electrical tree owing to water treeing is initiated at low electric field and grown with discontinuously. Namely, water tree is shown up a different characteristics of tree growth.

  • PDF

연사방법에 따른 면/폴리에스테르 복합사 편성물의 역학적 특성 및 3D CAD System에 의한 외관특성 (Mechanical properties and 3D CAD Images of the Appearance of Cotton/Polyester Composite Yarn Knitted Fabric by Different Yarn Twisting Methods)

  • 김소진;전동원;박영환
    • 한국염색가공학회지
    • /
    • 제18권3호
    • /
    • pp.49-58
    • /
    • 2006
  • The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

Ti염 및 Fe염으로 화학처리된 염색공단 슬러지를 재활용한 인공경량골재의 물리적 특성에 관한 연구 (Study on the Physical Properties of the Artificial Lightweight Aggregate Recycled from the Dyestuff Sludge Treated Chemically With Ti and Fe Salt)

  • 최종오;정용욱
    • 한국건설순환자원학회논문집
    • /
    • 제3권1호
    • /
    • pp.34-42
    • /
    • 2015
  • 본 연구는 단순매립 및 소각처리 되고 있는 염색공단 슬러지의 재활용을 목적으로 Ti염과 Fe염으로 화학 처리된 염색공단 슬러지를 이용하여 인공경량골재를 제조하고, 인공경량골재로의 활용성 검토를 위하여 골재의 물리적 특성과 환경유해성 등을 평가하였다. 인공경량골재 제조는 점결제로 점토를 이용하여 점토와 슬러지 배합비율에 따른 성형성을 평가하여 최적 함수량을 선정하고, 최적 배합비를 기준으로 둥근 모양의 형태로 가공한 후 건조과정과 2단계의 소성과정을 거쳐 제조하였다. 제조된 경량골재는 KS F 2534 "구조용 경량 골재"를 기준으로 인공경량골재의 입도 및 조립률, 밀도 및 흡수율, 단위용적질량, 안정성 및 환경유해성 등을 평가하였다. 실험 결과 입도와 조립률에서 기준 범위를 일부 벗어났으나 다른 모든 물리적 특성은 기준 값을 모두 만족하는 것으로 나타났으며, 입도와 조립률도 향후 제조공정에서 충분히 해결할 수 있는 것을 확인할 수 있었다.

정수장 원생동물 분석방법의 국내 실험실간 교차시험 연구 (Interlaboratory Study for Cryptosporidium and Giardia Test Methods in Water)

  • 정현미;박상정;김대균;박상희;김이호;이상호;조주래;이경희;박종근;이목영;변승헌;조은주;임연택
    • 한국물환경학회지
    • /
    • 제22권2호
    • /
    • pp.321-327
    • /
    • 2006
  • This interlaboratory study was designed to evaluate protozoan test methods in water and to predict the major causes of deviation of the methods. Each of four laboratories with previous experience of protozoa analysis in water participated, and met the initial performance criteria of EPA 1623 method provided. The protozoan analysis procedure consists of filtrations, concentration, immunomagnetic separation, dyeing (staining) and counting with observation. We tested three different filtration equipments: capsule filter for 10 L of surface water, and high volume (HV) capsule filter and membrane filter for 100 L of finished water. When the recovery of each step of the procedure was evaluated with EasySeed, the commercial stock of each 100 Cryptosporidium and Giardia, immunomagnetic separation and filtration step were the most crucial steps affecting the stability of the recovery, especially for Cryptosporidium. There was no significant difference of recovery among the filtration methods. Recovery of protozoa from source water were evaluated with spiked EasySeed as matrix tests. The recoveries of Giardia increased significantly in the matrix tests compared those in the deionized water. We also applied red stained mixture stocks of Cryptosporidium and Giardia called ColorSeed as internal standards of water sample tests. The recoveries of both EasySeed and ColorSeed in samples tested were within the range of the criteria, however, the Giardia recoveries using ColorSeed decreased significantly. Further optimization study with ColorSeed will be necessary, considering the convenience of using the internal standard without additional sample analysis. The significant factors of the recovery variation were identified as the differences of laboratories as well as water quality and type of the stock for spiking. The results of this study emphasize the importance of the quality assurance program for protozoan analysis lab in water.

2-Methyl-4-methoxydiphenylamine 합성을 위한 촉매반응의 최적화 (Optimization of Catalytic Reaction for Synthesis of 2-Methyl-4-methoxydiphenylamine)

  • 조정우;김은석;김기석;김성훈
    • 공업화학
    • /
    • 제10권2호
    • /
    • pp.293-298
    • /
    • 1999
  • Fluoran계 감열색소의 중간체인 2-Methyl-4-methoxydiphenylamine(MMDPA)을 합성하는 촉매반응의 반응기구를 규명하고 반응조건을 최적화하였다. 반응물질로서는 2-methyl-4-methoxyaniline(MMA), 3-methyl-4-nitroanisole(MNA), 그리고 cyclohexanone의 혼합물을 사용하였으며, 5 wt % Pd/C를 촉매로 사용하였다. 반응실험은 reflux condenser가 부착된 개방형 slurry reactor에서 진행시켰으며, 생성물은 GC/MS와 NMR에 의해서 분석하였다. 반응조건을 최적화 시킨 결과 xylene용매 속에서 0.01 gmoles MMA 투입기준으로 MMA : MNA : cyclohexanone = 1 : 2 : 150의 반응물조성, $160^{\circ}C$의 반응온도, 0.5 g 촉매량 조건에서 8~10시간 경과 후 90 mole %의 MMDPA수율을 얻을 수 있었다. MMA와 cyclohexanone간의 축합반응에 의해 생성된 중간생성물의 탈수소화 반응단계가 총괄반응을 율속함을 알 수 있었다. MNA를 MMA와 함께 반응물에 투입함으로써 hydrogen transfer반응에 의하여 총괄반응속도와 MMDPA수율이 증대되었다. 반응물에 과량으로 투입된 cyclohexanone은 MMA와의 축합반응을 촉진시키는 역할을 하였다.

  • PDF

염색폐수의 생물학적 처리에 미치는 cosubstrates의 영향 및 색도제거 기전 연구 (A Study on the Effects of Cosubstrates on the Biological Treatment and the Decolorization Mechanisms of Dyeing Wastewater)

  • 김미경;서상준;안재환;신응배
    • 대한환경공학회지
    • /
    • 제28권7호
    • /
    • pp.738-745
    • /
    • 2006
  • 본 연구에서는 염색폐수의 색도제거 기전을 미생물 floc에의 물리 화학적 흡착과 미생물의 대사에 의한 생물학적 제거의 두 가지로 분류하였다. 색도제거의 반응 조건, 즉 혐기/호기 조건, cosubstrate의 종류와 주입량 등을 회분식 실험에 의해 규명하고, 활성슬러지와 비활성슬러지의 biosorption 실험을 통하여 색도제거 기전을 확인하였다. 염색폐수의 색도는 호기조건과 혐기조건에서 각각 102 ${\Delta}$unit/g MLSS, 123 ${\Delta}$unit/g MLSS가 제거되어 혐기조건에서의 제거율이 높았으며, 유기물은 호기조건에서 82 $mg{\Delta}$COD/gMLSS, 혐기조건에서 75 $mg{\Delta}$COD/gMLSS 제거되어 호기조건에서 제거율이 더 높게 나타났다. Cosubstrate로서 실폐수인 가정하수와 acetate를 이용하여 주입량에 따른 염색폐수의 제거능을 분석한 결과, cosubsrate의 주입에 따라 색도 및 유기물 제거량이 증가함을 확인하였으며 가정하수보다는 acetate가 색도제거에 있어서 더 효율적인 cosubstrate임을 알 수 있었다. 활성슬러지와 멸균된 비활성슬러지를 이용한 색도제거 실험 결과. 비활성슬러지의 색도제거량은 가정하수의 주입에 따라 $20.3{\sim}37.3$ ${\Delta}$unit/g MLSS, 활성슬러지는 $102.0{\sim}159.0$ ${\Delta}$unit/g MLSS로 나타났다. 또한 반응 초기에는 물리 화학적 흡착이 우세하였으나 시간이 지나면서 생물대사 작용에 의한 제거가 증가하는 경향을 보였으며, cosubstrate의 주입에 따른 미생물의 대사에 의한 제거분율이 증가하는 것으로 분석되었고, 이는 호흡율 측정결과와도 그 경향이 일치하였다.

18·19세기 서양 복식의 단추를 활용한 텍스타일 디자인 연구 (Study on the Textile Design using Buttons on Western clothing in the 18th·19th Centuries)

  • 이의정;강경애
    • 한국의상디자인학회지
    • /
    • 제24권2호
    • /
    • pp.97-115
    • /
    • 2022
  • The study aims to explore a new direction for research on buttons by understanding the functions and artistic features of buttons on Western clothing in the 18th and 19th centuries, and to use the findings to develop a textile design. In terms of the research method, the period was set in the 18th and 19th centuries, when decorative features and artistic values of buttons on Western clothing reached theirpeak, while theoretical analysis was made based on literature and previous research papers on Western clothing, websites of the Metropolitan Museum and French Museum of Decorative Arts and other website materials, as well as special exhibition materials of the National Museum of Modern and Contemporary Art. Textile designs were developed using computer programs, including Clip Studio Paint and Adobe Photoshop, by integrating the reinterpreted motif of buttons in the 18th and 19th centuries and the styles that prevailed at that time. The results are as follows. First, buttons on Western clothing had the following three functions: a practical function, a symbolic function representing the wearer's status, and a decorative function expressing individuality and beauty. Second, buttons in the 18th century were works of art made with various handicraft techniques and were an important medium that expressed the wearer's fashion sense. In addition, buttons in the 19th century were mass-produced as a result of industrialization and took a major step forward with the development of materials and dyeing. Buttons reflected themes of poetry, drama, biblical stories, music and art, lifestyle,, along with the political and social atmosphere that rapidly changed after the revolution and fashion trends. Third, the artistic features and shapes of buttons were reinterpreted to create a design motif, and the design was developed reflecting the characteristic elements of the rococo style of the 18th century and the art nouveau style of the 19th century that can conform to modern fashion, thereby rediscovering the artistic meaning and value implied in buttons. In the future, the research on creative buttons of 20th century artists is expected to be conducted from various perspectives.

노지재배(露地栽培)에 적응(適應)한 아열대산(亞熱帶産) 뽕나무의 특성(特性)과 양잠(養蠶)에서의 응용(應用) (Characteristic and Application Under the Sericulture of Subtropical Zones Mulberry Adapted Itself to the Field Cultivation)

  • 석영식;박상조;안신헌;한상미;여주홍;한명세
    • 한국잠사곤충학회지
    • /
    • 제47권2호
    • /
    • pp.68-77
    • /
    • 2005
  • 아열대산 MK-T2의 생태적 특성조사, 발근 특성 그리고 오디의 형태와 이화학적 특성, 사료가치 검정 평가, MK-T2로 사육한 5령3일차 누에의 아미노산 분석과 누에 에탄올 추출액의 약리효과에 대한 연구를 하여 다음과 같은 결과를 얻어 잎과 오디 등 다용도 $\ulcorner$청강상(淸江桑)$\lrcorner$ 자체개발 품종육성의 기본자료로 활용하였다. 1. 아열대산 MK-T2의 생태적 특성을 조사한 결과 발아 개엽기는 개량뽕과 비교하여 $9{\sim}10$일 빠르며 새순의 발육 또한 67.2 cm로 3 cm 정도 길었으며, 새순의 뽕잎수도 18.6 개로 2개가 많았다. 2. 엽의 형태는 엽장이 엽폭보다 약간 발달한 1.10 비율을 나타내었으며 엽두께, 엽면적은 각각 $228.2{\mu}m,\;225.6cm^2$로서 개량뽕보다 약간 얇거나 작은편이었다. 3. MK-T2는 화주부분이 0.7mm로 짧게 존재하며 주두내면에 드물게 미모(微毛)가 분포하여 장화계구(長花桂區) 계두유모류(桂頭有毛類)에 속한다고 판단이 된다. 4. 고손장비율은 5.7%로서 개량뽕의 12.9%와 비교하여 상당히 우수하지만 무농약재배의 조건에서 충해의 경우 주당 피해율이 88.6%로서 개량뽕의 47.5%의 거의 2배정도 약함을 보여주었다. 5 .무처리 신소삽목시 발근율이 가지의 굵기와 무관하게 100% 발근하여 온대지역의 개량뽕이 15mm 이상에서 10% 발근한 사실과 비교하여 매우 우수한 발근력을 보여주었으며 발근 형태적 특성은 토양과 물 모두 45%비율로 가지의 중부와 하부에서 발근하는 특성을 보여주어 하부에서 발근하는 온대지역의 뽕나무와는 많은 차이를 나타내었다. 6. MK-T2의 오디는 길이가 24.6 mm, 수분율 78.8%, 당도가 19.21 Brix%로 오디용으로 개발된 품보 20, 검설뽕과 비슷한 성적을 나타내었으나 특이하게 pH 4.7로 단맛과 신맛을 함께 지니고 있었다. 7. NK-T2의 사료가치 검정평가 결과 개량뽕과 비교하여 유충기간과 화용비율, 견충비율은 거의 비슷하였으나, 단견중, 견층중. 2만두 수견량은 약간 떨어지는 결과를 보여 엽질이 비교적 우량하다고 평가되었다. 8. MK-T2로 사육한 5령3일차 누에의 아미노산을 분석한 결과 개량뽕을 급이한 대조구 간에는 서로 거의 유사한 아미노산 조성을 보여주었으나 MK-T2를 급이한 시험구의 경우 대조구와 비교하여 Leu에서 차이를 보여주었으며 Ile는 대조구에서는 검출되지 않았으나 MK-T2 시험구에서는 검출되었다. 9. MK-T2로 사육한 5령3일차 누에 에탄올 추출물의 약리효과 검정결과 누에 에탄을 추출물을 투여한 쥐에서 적출한 신장조직에 대한 HE 염색 및 조직면역화학염색 모두에서 조직학적 병징이 나타나지 않았고 $TGF-{\beta}1$ 단백 발현이 거의 확인되지 않는 수준으로 낮아졌다.